AUO T315XW02 V7 Specification
Global LCD Panel Exchange Center
Product Description: T315XW02 TFT-LCD PANEL
AUO Model Name: T315XW02 V7
Customer Part No/Project Name: SONY(WAX2)
www.panelook.com
Customer Signature Date AUO Date: 2006/10/25
Approved By: PM director/
PL Chen
Reviewed By: RD director /
Hong Jye Hong
Prepared By: Product Manager/
Sammi Lin
©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315XW02 V7 - Specs. Ver 0.1 1/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Document Version : 0.1
Date : 2006/10/25
Product Specifications
31.5” WXGA Color TFT-LCD Module
Model Name: T315XW02 V7
( ) Preliminary Specifications
(*) Final Specifications
©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315XW02 V7 - Specs. ver 0.1 2/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
No ITEM
COVER
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
2 ABSOLUTION MAXIMUM RATINGS
3 ELECTRICAL SPECIFICATIONS
3-1 ELECTRICAL CHARACTERISTICS
www.panelook.com
Contents
3-2 INTERFACE CONNECTIONS
3-3
3-4 SIGNAL TIMING SPECIFICATIONS
3-5 SIGNAL TIMING WAVEFORMS
3-6 COLOR INPUT DATA REFERENCE
3-7 POWER SEQUENCE for LCD
4 OPTICAL SPECIFICATIONS
5 MECHANICAL CHARACTERISTICS
6 RELIABILITY
7 INTERNATIONAL STANDARDS
7-1 SAFETY
7-2 EMC
7-3 GREEN
8 PACKING
9 PRECAUTIONS
BACKLIGHT CONNECTOR PIN CONFIGURATION -
©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315XW02 V7 - Specs. ver 0.1 3/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
Version Date No Old Description New Description Remark
0.0 2006/07/28 First issue
www.panelook.com
Record of Revision
0.1 2006/10/25 Front and Back Drawing Remove emboss and add FFC
tape
2 Vibration spec(with carton)
Vibration leval:1.5Grms
8 Drop spec(with carton)
Drop height:53.3cm
Packing carton label Q’ty:3 Packing carton label Q’ty:4 Page .25
Carton and Palletizing seque
nce revised.
Vibration spec(with carton)
Vibration leval:0.83Grms
Drop spec(with carton)
Drop height:46.0cm
Carton and Palletizing sequenc
e revised.
Page.21,22
Page.23
Page.23
Page.27
©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315XW02 V7 - Specs. ver 0.1 4/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
1. General Description
This specification applies to the 31.51 inch Color TFT-LCD Module T315XW02 V7.
This LCD module has a TFT active matrix type liquid crystal panel 1366x768 pixels,
and diagonal size of 31.51 inch. This module supports 1366x768 XGA-WIDE mode
(Non-interlace).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged
in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined
with a 8-bit gray scale signal for each dot.
www.panelook.com
The T315XW02 V7 has been designed to apply the 8-bit 1 channel LVDS interface
method. It is intended to support displays where high brightness, wide viewing angle,
high color saturation, and high color depth are very important.
General Information
Items Specification Unit Note
Active Screen Size 31.51 inches
Display Area 697.685 (H) x 392.256(V) mm
Outline Dimension 760.0(H) x 450.0(V) x 47.7(D) mm With inverter
Driver Element a-Si TFT active matrix
Display Colors 16.7M Colors
Number of Pixels 1366 x 768 Pixel
Pixel Pitch 0.51075 mm
Pixel Arrangement RGB vertical stripe
Display Mode Normally Black
Surface Treatment AG, 3H
RoHS RoHS compliance
©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315XW02 V7 - Specs. ver 0.1 5/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause permanent
damage to the unit.
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage Vcc -0.3 7.0 [Volt] Note 1
Input Voltage of Signal Vin -0.3 5.25 [Volt] Note 1
BLU Input Voltage VDDB -0.3 19 [Volt] Note 1
www.panelook.com
BLU Brightness Control Voltage VBLON -0.3 2.8 [Volt] Note 1
Operating Temperature TOP 0 +50 [oC] Note 2
Operating Humidity HOP 10 90 [%RH] Note 2
Storage Temperature TST -20 +60 [oC] Note 2
Storage Humidity HST 10 90 [%RH] Note 2
Panel Surface Temperature - 65 [oC] Note 2
Note 1: Duration: 50 msec.
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At
temperatures greater than 40, the wet bulb temperature must not exceed 39 .
©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315XW02 V7 - Specs. ver 0.1 6/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
3. Electrical Specification
The T315XW02 V7 requires two power inputs. One is employed to power the LCD electronics and to
drive the TFT array and liquid crystal. The second input power for the BLU, is to power inverter..
3-1 Electrical Characteristics
www.panelook.com
Min Typ Max
ValuesParameter
Unit Notes
LCD:
Power Supply Input Voltage Vcc 4.5 5.0 5.5 Vdc 1
Power Supply Input Current Icc - 1.2 1.5 A 2
Power Consumption Pc - 6.0 7.5 Watt 2
Inrush Current I
LVDS
Interface
Interface
Differential Input High
Threshold Voltage
Differential Input Low
Threshold Voltage
Common Input Voltage
Input High Threshold
Voltage
Input Low Threshold
Voltage
RUSH
VTH +100 mV
VTL -100 mV
VCIM 1.10 1.25 1.40 V
VIH
(High)
VIL
(Low)
Backlight Power Consumption PDDB
- - 4 Apeak 3
2.4 3.3 VdcCMOS
0 0.7 Vdc
77.4 85.5 93.6
Watt
Life Time 50,000 Hours
4
4
Note :
1. The ripple voltage should be controlled under 10% of V
2. Vcc=5.0V, =
f 60Hz, fCLK=81.5Mhz , 25, Test Pattern : White Pattern
v
CC
©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315XW02 V7 - Specs. ver 0.1 7/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
3. Measurement condition :
www.panelook.com
90%
10%
GND
Trush= 470 uS
VCC
4. VCIM = 1.2V
VTH
VCIM
VTL
0V
5. The performance of the Lamp in LCM, for example life time or brightness, is extremely
influenced by the characteristics of the DC-AC Inverter. So all the parameters of an inverter
should be carefully designed so as not to produce too much leakage current from high-voltage
output of the inverter. When you design or order the inverter, please make sure unwanted
lighting caused by the mismatch of the lamp and the inverter (no lighting, flicker, etc) never
occurs. When you confirm it, the LCD Assembly should be operated in the same condition as
installed in your instrument.
6. Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting
tape, TFT-LCD Module have a low luminance and the inverter has abnormal action because
leakage current occurs between lamp wire and conducting tape.
7. The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less.
At temperatures greater than 40 , the wet bulb temperature must not exceed 39.When
operate at low temperatures, the brightness of CCFL will drop and the life time of CCFL will be
reduced.
©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315XW02 V7 - Specs. ver 0.1 8/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
3-2 Interface Connections
- LCD connector : S41B-PH-SM3-TB
- LVDS Transmitter: DS90C385 (NS).
PIN No. Description PIN No. Description
1 DC Power Supply 21 LVDS Clock+
2 DC Power Supply 22 Ground
3 DC Power Supply 23 RxIN3-
4 DC Power Supply 24 Rxin3+
www.panelook.com
5 DC Power Supply 25 GND
6 Ground 26 NC
7 Ground 27 NC
8 Ground 28 NC
9 Ground 29 Reserved
10 Ground 30 Reserved
11 RxIN0- 31 NC
12 Rxin0+ 32 NC
13 Ground 33 NC
14 RxIN1- 34 NC
15 Rxin1+ 35 NC
16 Ground 36 NC
17 RxIN2- 37 NC
18 Rxin2+ 38 NC
19 Ground 39 Reserved
20 LVDS Clock- 40 Reserved
41 Reserved
Note:
1. All GND (ground) pins should be connected together and should also be connected to the
LCD’s metal frame. All Vcc (power input) pins should be connected together.
©Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved. T315XW02 V7 - Specs. Ver 0.1 9/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...