AUO T315HW07 V9 Specification

T315HW07 V9 Product Specification

Rev.0.2

Model Name: T315HW07 V9

Issue Date : 2010/12/01

(＊＊＊＊) Preliminary Specifications

( ) Final Specifications

Customer Signature Date AUO Date

Approved By

_________________________________

Note

Approval By PM Director

Yen Ting Chiu

____________________________________

Reviewed By RD Director

Eugene CC Chen

____________________________________

Reviewed By Project Leader

Shinli Chen

____________________________________

Prepared By PM

Joanne Hsu

____________________________________

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 1 / 32

Contents

T315HW07 V9 Product Specification

Rev.0.2

No

CONTENTS

RECORD OF REVISIONS

1 GENERAL DESCRIPTION

2 ABSOLUTE MAXIMUM RATINGS

3 ELECTRICAL SPECIFICATION

3-1 ELECTRIACL CHARACTERISTICS

3-2 INTERFACE CONNECTIONS

3-3 SIGNAL TIMING SPECIFICATION

3-4 SIGNAL TIMING WAVEFORM

3-5 COLOR INPUT DATA REFERENCE

3-6 POWER SEQUENCE

3-7 BACKLIGHT SPECIFICATION

4 OPTICAL SPECIFICATION

5 MECHANICAL CHARACTERISTICS

6 RELIABILITY TEST ITEMS

7 INTERNATIONAL STANDARD

7-1 SAFETY

7-2 EMC

8 PACKING

8-1 DEFINITION OF LABEL

8-2 PACKING METHODS

8-3 PALLET AND SHIPMENT INFORMATION

9 PRECAUTION

9-1 MOUNTING PRECAUTIONS

9-2 OPERATING PRECAUTIONS

9-3 ELECTROSTATIC DISCHARGE CONTROL

9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE

9-5 STORAGE

9-6 HANDLING PRECAUTIONS FOR PROTECT FILM

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 2 / 32

Record of Revision

T315HW07 V9 Product Specification

Rev.0.2

Version

0.0 2010/08/03 First release

0.1 2010/10/08

2010/10/25

2010/10/25

2010/10/26

0.2 2010/12/01

19 Update luminance spec

Date Page Description

19 Update Color Coordinates

6 Update DC characteristics

15 Add note 3

16 Add AC Characteristics

6 Update BLU power consumption

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 3 / 32

T315HW07 V9 Product Specification

Rev.0.2

1. General Description

This specification applies to the 32.0 inch Color TFT-LCD Module T315HW07 V9. This LCD module has a TFT

active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 32.0 inch. This module supports

1,920x1,080 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical

stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit gray scale signal for each dot.

The T315HW07 V9 has been designed to apply the 10-bit 4 channel LVDS interface method. It is intended to

support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very

important.

* General Information

Items Specification Unit Note

Active Screen Size 32.00 inch

Display Area 698.40(H) x 392.85(V) mm

Outline Dimension 735.4(H) x 433.0 (V) x 20.9(D) mm D: front bezel to T-con cover

Driver Element a-Si TFT active matrix

Bezel Opening 705.4 (H) x 400 (V) mm

Display Colors 10 bit, 1073.7M Colors

Number of Pixels 1,920x1,080 Pixel

Pixel Pitch 0.36375 (H) x 0.36375 (W) mm

Pixel Arrangement RGB vertical stripe

Display Operation Mode Normally Black

Surface Treatment Anti-Glare, 3H Haze=2%

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 4 / 32

T315HW07 V9 Product Specification

2. Absolute Maximum Ratings

The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit

Item Symbol Min Max Unit Conditions

Logic/LCD Drive Voltage Vcc -0.3 14 [Volt] Note 1

Input Voltage of Signal Vin -0.3 4 [Volt] Note 1

Operating Temperature TOP 0 +50 [oC] Note 2

Operating Humidity HOP 10 90 [%RH] Note 2

Storage Temperature TST -20 +60 [oC] Note 2

Storage Humidity HST 10 90 [%RH] Note 2

Panel Surface Temperature PST 65 [oC] Note 3

Note 1: Duration:50 msec.

Note 2 : Maximum Wet-Bulb should be 39 and No condensation.℃

Rev.0.2

The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures greater

than 40 , the wet bulb temperature must not exceed 39 .

Note 3: Surface temperature is measured at 50℃ Dry condition

℃ ℃

℃

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 5 / 32

T315HW07 V9 Product Specification

Rev.0.2

3. Electrical Specification

The T315HW07 V9 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT

array and liquid crystal. The second input for BLU is to power inverter.

3.1 Electrical Characteristics

3.1.1: DC Characteristics

Parameter Symbol

LCD

Power Supply Input Voltage VDD 10.8 12 13.2 VDC

Power Supply Input Current IDD - 0.36 0.79 A 1

Power Consumption PC -- 4.32 10.428

Inrush Current I

Input Differential Voltage

LVDS

Interface

CMOS

Interface

Backlight Power Consumption PBL --

Differential Input High Threshold Voltage

Differential Input Low Threshold Voltage

Input Common Mode Voltage V

Input High Threshold Voltage

Input Low Threshold Voltage

RUSH

∣

V

∣

ID

VTH +100 -- +300 mVDC 3

VTL -300 -- -100 mVDC 3

ICM

VIH

(High)

VIL

(Low)

Min. Typ. Max

-- -- 4 A 2

200 400 600 mVDC 3

1.1 1.25 1.4 VDC 3

2.7 -- 3.3 VDC 4

0 -- 0.6 VDC 4

Value

37.3 40.7

Unit Note

Watt 1

Watt

Life time (MTTF) 30000

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 6 / 32

Hour 8, 9

3.1.2: AC Characteristics

s

µ

T315HW07 V9 Product Specification

Rev.0.2

Parameter Symbol

Input Channel Pair Skew Margin t

Receiver Clock : Spread Spectrum

LVDS
Interface

Modulation range

Receiver Clock : Spread Spectrum
Modulation frequency

Receiver Data Input Margin
Fclk = 85 MHz
Fclk = 65 MHz

Note :

1. Test Condition:

(1) V
(2) Fv = Type Timing, 120Hz
(3) Fclk= Max freq.
(4) Temperature = 25 ℃
(5) Typ. Input current : White Pattern

2. Measurement condition : Rising time = 400us

= 12.0V

DD

Max. Input current: Heavy loading pattern defined by AUO

SKEW (CP)

Fclk_ss

Fss

tRMG

Value

Min. Typ. Max

-500 -- +500 ps 5

Fclk

-3%

30

-0.4

-0.5

--

--

--

--

Fclk

+3%

200

0.4

0.5

Unit Note

MHz

6

KHz

6

ns

7

3. V

= 1.25V

ICM

GND

GND

GNDGND

10%

400

400

400400

90%

VVVV

DD

DD

DDDD

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 7 / 32

L V D S -

V

IC M

L V D S +

G N D

0 V

4.

The measure points of V

5. Input Channel Pair Skew Margin

and V

IH

T315HW07 V9 Product Specification

V

T H

|VID|

V

T L

|VID|

|VID|

are in LCM side after connecting the System Board and LCM.

IL

Rev.0.2

Note: x = 0, 1, 2, 3, 4

6. LVDS Receiver Clock SSCG (Spread spectrum clock generator) is defined as below figures

1111////FFFF

SS

SS

SSSS

Fclk

Fclk____ss

FclkFclk

ss((((max

ssss

Fclk

Fclk

FclkFclk

Fclk

Fclk____ss

FclkFclk

ss((((min

ssss

max))))

maxmax

min))))

minmin

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 8 / 32

7. Receiver Data Input Margin

T315HW07 V9 Product Specification

Rev.0.2

Parameter Symbol

Min Type Max

Input Clock Frequency Fclk Fclk (min) -- Fclk (max) MHz

Input Data Position0 tRIP1 -|tRMG| 0 |tRMG| ns

Input Data Position1 tRIP0 T/7-|tRMG| T/7 T/7+|tRMG| ns

Input Data Position2 tRIP6 2T/7-|tRMG|

Input Data Position3 tRIP5 3T/7-|tRMG|

Input Data Position4 tRIP4 4T/7-|tRMG|

Input Data Position5 tRIP3 5T/7-|tRMG|

Input Data Position6 tRIP2 6T/7-|tRMG|

Rating

Unit

2T/7 2T/7+|tRMG| ns

3T/7 3T/7+|tRMG| ns

4T/7 4T/7+|tRMG| ns

5T/7 5T/7+|tRMG| ns

6T/7 6T/7+|tRMG| ns

tRIP2

tRIP3

tRIP4

tRIP5

Note

T=1/Fclk

tRIP6

tRIP0

tRIP1
LVDS-Rx
Input Data

Rx1 Rx0 Rx6 Rx5 Rx4 Rx3 Rx2 Rx1 Rx0 Rx6Rx2Rx3

LVDS-Rx

VVVV

=

= 0000VVVV

= =

diff

diff

Input Clock

diff diff

1/Fclk=T

8. The relative humidity must not exceed 80% non-condensing at temperatures of 40℃ or less. At

temperatures greater than 40℃, the wet bulb temperature must not exceed 39℃. When operate at low

temperatures, the brightness of LED will drop and the life time of LED will be reduced.

9. The lifetime (MTTF) is defined as the time which luminance of LED is 50% compared to its original value.

[Operating condition: Continuous operating at Ta = 25±2℃]

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 9 / 32

3.2 Interface Connections

T315HW07 V9 Product Specification

Rev.0.2

LCD connector: FI-RE51S-HF (JAE, LVDS connector)

FI-RE41S-HF (JAE, LVDS connector)

PIN Symbol Description PIN

1

2

3

4

5

6

7

8

9

10

11

12

13

N.C. No connection 21

N.C. No connection 22

N.C. No connection 23

N.C. No connection 24

N.C. No connection 25

N.C. No connection 26

N.C. No connection 27

N.C. No connection 28

GND Ground 29

CH3_0-

CH3_0+

CH3_1-

CH3_1+

LVDS Channel 3, Signal 0- 30

LVDS Channel 3, Signal 0+ 31

LVDS Channel 3, Signal 1- 32

LVDS Channel 3, Signal 1+ 33

Symbol Description

CH3_3+

CH3_4-

CH3_4+

GND

GND

CH4_0-

CH4_0+

CH4_1-

CH4_1+

CH4_2-

CH4_2+

GND

CH4_CLK-

LVDS Channel 3, Signal 3+

LVDS Channel 3, Signal 4-

LVDS Channel 3, Signal 4+

Ground

Ground

LVDS Channel 4, Signal 0-

LVDS Channel 4, Signal 0+

LVDS Channel 4, Signal 1-

LVDS Channel 4, Signal 1+

LVDS Channel 4, Signal 2-

LVDS Channel 4, Signal 2+

Ground

LVDS Channel 4, Clock -

14

15

16

CH3_CLK-

17

CH3_CLK+

18

19

20

CH3_2-

CH3_2+

GND

GND

CH3_3-

LVDS Channel 3, Signal 2- 34

LVDS Channel 3, Signal 2+ 35

Ground 36

LVDS Channel 3, Clock - 37

LVDS Channel 3, Clock + 38

Ground 39

LVDS Channel 3, Signal 3- 40

41

CH4_CLK+

GND

CH4_3-

CH4_3+

CH4_4-

CH4_4+

GND Ground

GND Ground

LVDS Channel 4, Clock +

LVDS Channel 4, Signal 3-

LVDS Channel 4, Signal 3+

LVDS Channel 4, Signal 4-

LVDS Channel 4, Signal 4+

Ground

Note: N.C. : please leave this pin unoccupied. It can not be connected by any signal

(Low/GND/High).

© Copyright AUO Optronics Corp. 2009 All Rights Reserved. Page 10 / 32