AUO T240XVN01.1 Specification

__________________________________

___________________________

____________________________________

T240XVN01.1 Product Specification

Model Name: T240XVN01.1 SKD Panel

Issue Date: 2012/08/15

( ) Preliminary Specifications

(＊＊＊＊)Final Specifications

Rev. 04

Customer Signature Date AUO Date

Approved By

_________________________________

Note

Approval By PM Director

Reviewed By RD Director

________

Reviewed By Project Leader

Prepared By PM

Contents

No

CONTENTS

RECORD OF REVISIONS

1 GENERAL DESCRIPTION

2 ABSOLUTE MAXIMUM RATINGS

3 ELECTRICAL SPECIFICATION

3-1 ELECTRIACL CHARACTERISTICS

3-2 INTERFACE CONNECTIONS

3-3 SIGNAL TIMING SPECIFICATION

3-4 SIGNAL TIMING WAVEFORM

T240XVN01.1 Product Specification

Rev. 04

3-5 COLOR INPUT DATA REFERENCE

3-6 POWER SEQUENCE

4 OPTICAL SPECIFICATION

5 Open Cell Drawing

6 RELIABILITY TEST ITEMS

7 AUO’s Basic BLU Optical Performance

8 INTERNATIONAL STANDARD

8-1 SAFETY

8-2 EMC

9 PACKING

9-1 DEFINITION OF LABEL

9-2 PACKING METHODS

10 PRECAUTION

10-1 MOUNTING PRECAUTIONS

10-2 OPERATING PRECAUTIONS

10-3 ELECTROSTATIC DISCHARGE CONTROL

10-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE

10-5 STORAGE

10-6 HANDLING PRECAUTIONS FOR PROTECT FILM

Record of Revision

T240XVN01.1 Product Specification

Rev. 04

Version

0.0 2012/02/06 First release

0.1 2012/05/15

15 Update optical specification (Cell Transparency)

20 Update AUO’s Basic BLU Optical Performance

0.2 2012/05/18

0.3 2012/08/15

0.4 2012/09/03

Date Page Description

4 Update general description

1 Model Name: T240XVN02.0 SKD Panel

1 Model Name: T240XVN01.0

1 Model Name: T240XVN01.1

T240XVN01.1 Product Specification

Rev. 04

1. General Description

This specification applies to the 24.0 inch Color TFT-LCD open cell unit. T240XVN01.1. This LCD open cell unit

has a TFT active matrix type liquid crystal panel 1,366x 768 pixels, and diagonal size of 24.0 inch. This open cell

unit supports 1,366x 768 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are

arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale

signal for each dot.

The T240XVN01.1 has been designed to apply the 8-bit 1 channel LVDS interface method. It is intended to

support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very

important.

* General Information

Items Specification Unit Note

Active Screen Size 24.00 inch

Display Area 531.72(H) x 298.94 (V) mm

Outline Dimension 546.06 (H) x 314.78 (V)

Driver Element a-Si TFT active matrix

Display Colors 8 bit, 16.7M Colors

Number of Pixels 1,366x 768 Pixel

Pixel Pitch 0.389 (H) x 0.389 (W) mm

Pixel Arrangement RGB Horizontal stripe

Display Operation Mode Normally Black

Surface Treatment Anti-Glare, 3H Haze=2%

Weight 535.1 g

mm

T240XVN01.1 Product Specification

2. Absolute Maximum Ratings

The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit

Item Symbol Min Max Unit Conditions

Logic/LCD Drive Voltage Vcc -0.3 14 [Volt] Note 1

Input Voltage of Signal Vin -0.3 4 [Volt] Note 1

Operating Temperature TOP 0 +50 [oC] Note 2

Operating Humidity HOP 10 90 [%RH] Note 2

Storage Temperature TST -20 +60 [oC] Note 2

Storage Humidity HST 10 90 [%RH] Note 2

Panel Surface Temperature PST 65 [oC] Note 3

Note 1: Duration:50 msec.

Note 2 : Maximum Wet-Bulb should be 39 and No condensation.℃

Rev. 04

The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures

greater than 40 , the wet bulb temperature must not exceed 39 .

Note 3: Surface temperature is measured at 50℃ Dry condition

℃ ℃

℃

T240XVN01.1 Product Specification

Rev. 04

3. Electrical Specification

The T240XVN01.1 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT

array and liquid crystal. The second input for BLU is to power inverter.

3.1.1 Electrical Characteristics

Parameter Symbol

Unit Note

Min. Typ. Max

LCD

Power Supply Input Voltage VDD 10.8 12 13.2 VDC 1

Power Supply Input Current IDD -- 0.28 0.483 A 2

Value

Power Consumption PC -- 3.363

Inrush Current I

Input Differential Voltage

LVDS

Interface

Differential Input High Threshold Voltage

Differential Input Low Threshold Voltage

Input Common Mode Voltage V

CMOS

Interface

Input High Threshold Voltage

Input Low Threshold Voltage

-- -- 3 A 3

RUSH

∣

V

∣

ID

200 400 600 mVDC 4

VTH -- -- +100 mVDC 4

VTL -100 -- -- mVDC 4

1.1 1.25 1.4 VDC 4

ICM

VIH

(High)

VIL

(Low)

2.7 -- 3.3 VDC

0 -- 0.6 VDC

4.275 Watt 2

Backlight Power Consumption PBL 45 50 55 Watt

3.1.2: AC Characteristics

Parameter Symbol

Receiver Clock : Spread Spectrum Modulation range

LVDS Interface

Receiver Clock : Spread Spectrum Modulation frequency

Receiver Data Input Margin Fclk = 85 MHz Fclk = 65 MHz

Note :

1. The ripple voltage should be controlled under 10% of VCC

2. Test Condition:

(1) V

= 12V

DD

(2) Fv = 60Hz

(3) F

= Max. Freq.

CLK

(4) Temperature = 25 ℃

(5) Test Pattern : White Pattern

Fclk_ss

Fss

tRMG

Min. Typ.

Fclk

-3%

30

-0.4

-0.5

Value

Unit Note

Max

--

Fclk

+3%

200

MHz

KHz

8

ns

0.4

0.5

9

s

µ

3. Measurement condition : Rising time = 400us

90%

T240XVN01.1 Product Specification

Rev. 04

VVVV

DD

DDDD

10%

400

400400

4. V

GND

GNDGND

= 1.25V

ICM

5. Input Channel Pair Skew Margin

6. The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. At

temperatures greater than 40 , the wet bulb te℃mperature must not exceed 39 . When operate at low

℃

temperatures, the brightness of LED will drop and the life time of LED will be reduced.

7. The lifetime (MTTF) is defined as the time which luminance of LED is 50% compared to its original value.

[Operating condition: Continuous operating at Ta = 25±2℃]

8. LVDS Receiver Clock SSCG (Spread spectrum clock generator) is defined as below figures

1111////FFFF

SS

Fclk

Fclk____ss

FclkFclk

Fclk

FclkFclk

Fclk

Fclk____ss

FclkFclk

ss((((max

max))))

ssss

maxmax

ss((((min

min))))

ssss

minmin

SSSS

9. Receiver Data Input Margin

Parameter Symbol

Min Type Max

Input Clock Frequency Fclk Fclk (min) -- Fclk (max) MHz T=1/Fclk

Rating

Unit Note

T240XVN01.1 Product Specification

tRIP2

tRIP3

tRIP4

tRIP5

tRIP6

tRIP0

LVDS-Rx Input Data

LVDS-Rx Input Clock

tRIP1

Rx1 Rx0 Rx6 Rx5 Rx4 Rx3 Rx2 Rx1 Rx0 Rx6Rx2Rx3

VVVV

=

= 0000VVVV

= =

diff

diff diff

Rev. 04

1/Fclk=T

AUO T240XVN01.1 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual