AUO T216XW01 V0 Specification

Global LCD Panel Exchange Center

Product Description: T216XW01 TFT-LCD PANEL with RoHS guarantee

AUO Model Name: T216XW01

Customer Part No/Project Name:

www.panelook.com

Customer Signature Date AUO 2008/11/14

Approved By: PM Director / Frank Hsu

Reviewed By: RD Director / Hong Hong Jye

Reviewed By: Project Leader / Sarah Ke

Prepared By: PM / Marcus Lai

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Product Specifications

21.6” WXGA Color TFT-LCD Module Model Name: T216XW01

(*) Preliminary Specifications

() Final Specifications

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

No ITEM

COVER

CONTENTS

RECORD OF REVISIONS

1 GENERAL DESCRIPTION

2 ABSOLUTE MAXIMUM RATINGS

3 ELECTRICAL SPECIFICATIONS

3-1 ELECTRICAL CHARACTERISTICS

3-2 INTERFACE CONNECTIONS

www.panelook.com

Contents

3-3 SIGNAL TIMING SPECIFICATIONS

3-4 SIGNAL TIMING WAVEFORMS

3-5 COLOR INPUT DATA REFERENCE

3-6 POWER SEQUENCE for LCD

4 OPTICAL SPECIFICATIONS

5 MECHANICAL CHARACTERISTICS

5-1 FRONT VIEW

5-2 REAR VIEW

6 RELIABILITY

7 INTERNATIONAL STANDARDS

7-1 SAFETY

7-2 EMC

7-3 Green

8 PACKING

8-1 PACKING INSTRUCTION

8-2 SHIPPING LABEL

8-3 CARTON LABEL

9 PRECAUTIONS

9-1 MOUNTING PRECAUTIONS

9-2 OPERATING PRECAUTIONS

9-3 ELECTROSTATIC DISCHARGE CONTROL

9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE

9-5 STORAGE

9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Record Revision

Version Date No Old Description New Description Remark

0.0 2008/11/14 First Draft

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

1. General Description

This specification applies to the 21.6 inch Color TFT-LCD Module T216XW01. This LCD module has a TFT

active matrix type liquid crystal panel with 1,366x768 pixels, and the diagonal size is 21.6 inches. This module

supports 1,366x768 XGA-WIDE mode (Non-interlace).

Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray

scale or the brightness of the sub-pixel color is determined with an 8-bit gray scale signal for each dot.

The T216XW01 has been designed to apply to 8-bit and 1 channel LVDS interface method. It is intended to

support displays where high brightness, wide viewing angle, high color saturation, and high color depth are

very important.

This module is not equipped with inverter board for backlight.

General Information

Item Specification Unit Note

Active Screen Size 21.6 inch

Display Area 477.417 (H) x 268.416 (V) mm



Outline Dimension

Resolution 1,366 x 768 pixel

Pixel Pitch 0.1165 x 0.3495

Pixel Arrangement RGB vertical stripe

Display mode Normally Black

Display Colors 16.7M (8-bit for R,G,B) color

Typical White Luminance 300 @ 8 mA [cd/m2]

Surface Treatment AG, Haze=11%, 3H

Green RoHS compliance

501 (H)

297 (V)  17.3 (D)

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

2. Absolute Maximum Ratings

The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.

Item Symbol Min Max Unit Note

Logic/LCD Drive Voltage Vdd -0.3 6 [Volt] 1

Input Voltage of Signal Vin -0.3 3.6 [Volt] 1

Operating Temperature TOP 0 +50 [oC] 2

Operating Humidity HOP 10 90 [%RH] 2

Storage Temperature TST -20 +60 [oC] 2

Storage Humidity HST 10 90 [%RH] 2

Note

1, Duration = 50 msec

2, Maximum Wet-Bulb should be 39

and No condensation.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

3. Electrical Specification

The T216XW01 requires two power inputs. One is employed to power the LCD electronics and to drive the

TFT array and liquid crystal. An inverter typically generates the second input, which powers the CCFL.

3-1 Electrical Characteristics

Parameter Symbol

Min Typ Max

Values

Unit Note

LCD:

Power Supply Input Voltage Vcc 4.5 5.0 5.5 Vdc

Power Supply Input Current Icc - 0.8 1.0 A 1

Power Consumption Pc - 4.0 5.0 Watt 1

Inrush Current I

Backlight Power Consumption - 26 30 Watt 2

Total Power Consumption - 30 35 Watt

Life Time 30,000 - - Hours 5,6

NoteΚ

1. Vcc=5.0V, Fv=60Hz, Fclk= 85.0 MHz , 25

2. Vcc rising time = 470

3. The performance of the Lamp in LCM, for example: lifetime or brightness, is extremely influenced by

the characteristics of the DC-AC Inverter. So all the parameters of an inverter should be carefully

designed so as not to produce too much leakage current from high-voltage output of the inverter.

When you design or order the inverter, please make sure unwanted lighting caused by the mismatch

of the lamp and the inverter (no lighting, flicker, etc) never occurs. When you confirm it, the LCD

Assembly should be operated in the same condition as installed in your instrument.

, Vcc=5.0V

- - 3 A 1

RUSH

. , Test Pattern : White Pattern

4. Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting tape,

TFT-LCD Module have a low luminance and the inverter has abnormal action because leakage

current occurs between lamp wire and conducting tape.

5. The relative humidity must not exceed 80% non-condensing at temperatures of 40

temperatures greater than 40

low temperatures, the brightness of CCFL will drop and the lifetime of CCFL will be reduced.

6. The life is determined as the time at which luminance of the lamp is 50% compared to that of initial

value at the typical lamp current on condition of continuous operating at 25 ± 2 . The lamp current

should fix at 8 mA (typ.) and then keep the 30,000hr(typ.) lamp life

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

, the wet bulb temperature must not exceed 39к. When operate at

or less. At

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

3-2 Interface Connectionsʳ

LCD connector (CN1): Starconn 093G30-B0001A-1

Pin No Symbol Description Note

1 Reserved Open or High AUO internal test pin

2 Reserved Open or High AUO internal test pin

3 Reserved Open or High AUO internal test pin

4 GND Ground

5 Rx0- LVDS Channel 0 [Polarity: Negative]

6 Rx0+ LVDS Channel 0 [Polarity: Positive]

7 GND Ground

8 Rx1- LVDS Channel 1 [Polarity: Negative]

9 Rx1+ LVDS Channel 1 [Polarity: Positive]

10 GND Ground

11 Rx2- LVDS Channel 2 [Polarity: Negative]

12 Rx2+ LVDS Channel 2 [Polarity: Positive]

13 GND Ground

ʳʳ

14 RXCLK- LVDS Clock [Polarity: Negative]

15 RXCLK+ LVDS Clock [Polarity: Positive]

16 GND Ground

17 Rx3- LVDS Channel 3 [Polarity: Negative]

18 Rx3+ LVDS Channel 3 [Polarity: Positive]

19 GND Ground

20 Reserved Open AUO internal test pin

21 LVDS Option* Low for JEIDA, High/Open for NS

22 Reserved Open

23 GND Ground

24 GND Ground

25 GND Ground

26 Vdd (+5V) 5V, DC, Regulated

27 Vdd (+5V) 5V, DC, Regulated

28 Vdd (+5V) 5V, DC, Regulated

29 Vdd (+5V) 5V, DC, Regulated

30 Vdd (+5V) 5V, DC, Regulated

NoteΚ

1, All GND (ground) pins should be connected together and should also be connected to the LCD’s metal

frame.

2, All Vcc (power input) pins should be connected together.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

+ 17 hidden pages

AUO T216XW01 V0 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual