AUO T200XW02 V1 Specification
Global LCD Panel Exchange Center
Product Description: 20” WXGA Color TFT-LCD Module
AUO Model Name: T200XW02 V1
Customer Part No/Project Name:
Customer Signature AUO 2006/08/16
www.panelook.com
Approved By: PL Chen
Reviewed By: Hong Jye Hong
Prepared By: Jerry Lee
Please return one copy with your signature and comments for our
confirmation.
AU Optronics Corporation
Tel: +886-3-563-2899
Fax: +886-3-563-1590
* No Reproduction and Redistribution Allowed
©Copyright AU Optronics, Inc.
March, 2006 All Rights Reserved. T200XW02 Ver1.2 1/26
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specifications
20” WXGA Color TFT-LCD Module
Model Name: T200XW02 V1
( ) Preliminary Specifications
(*) Final Specifications
©Copyright AU Optronics, Inc.
March, 2006 All Rights Reserved. T200XW02 Ver1.2 2/26
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
COVER
CONTENTS
RECORD OF REVISIONS
GENERAL DESCRIPTION1
ABSOLUTE MAXIMUM RATINGS2
www.panelook.com
Contents
ITEMNo
ELECTRICAL SPECIFICATIONS3
ELECTRICAL CHARACTREISTICS3-1
INTERFACE CONNECTIONS3-2
SIGNAL TIMING SPECIFICATIONS3-3
SIGNAL TIMING WAVEFORMS3-4
COLOR INPUT DATA REFERNECE3-5
POWER SEQUENCE3-6
OPTICAL SFECIFICATIONS4
MECHANICAL CHARACTERISTICS5
6
INTERNATIONAL STANDARDS
SAFETY6-1
EMC6-2
PACKING (Green Mark Description)7
PRECAUTIONS8
©Copyright AU Optronics, Inc.
March, 2006 All Rights Reserved. T200XW02 Ver1.2 3/26
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Record of Revision
Version Date No Old Description (V0) New Description(V1) Remark
1.0 06’/04/21 1 Luminance: 450nit (@6.5mA) Luminance: 400nit (@6.5mA)
Color Coordinates:
4
(Wx,Wy) = (0.295,0.305)
1.1 06/04/27 3
1.2 06/08/16 1 General Information 16.2M 16.7M Color
Color Coordinates:
(Wx,Wy) = (0.30,0.31)
To add the **Note of lamps start
voltage.
©Copyright AU Optronics, Inc.
March, 2006 All Rights Reserved. T200XW02 Ver1.2 4/26
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
1. General Description
This specification applies to the 20.0 inch Color TFT-LCD Module T200XW02.
This module supports the WXGA (1366(H) x 768(V)) screen format and 16.7M colors (6-bits + True Color
FRC).
All input signals are 1 channel LVDS interface compatible.
This module is without any inverter card for backlight.
Features
-WXGA 1366(H) x 768(V) resolution
-Fast response Time (8ms)
-50,000 hours lamp life
www.panelook.com
-6 CCFL Side Light Design (Cold Cathode Fluorescent Lamp)
-High brightness, High contrast ratio
-Wide viewing angle
-Low power consumption
-Green Design (ROHS Compliance)
-HDTV Ready Module
Application
Personal TV
Multi-function media
Video Game Console
©Copyright AU Optronics, Inc.
March, 2006 All Rights Reserved. T200XW02 Ver1.2 5/26
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
* General Information
The following items are characteristics summary on the table 25 condition:
Items Specification Unit Note
Active Screen Size 20.04 inches 50.9cm diagonal
Display Area 443.61(H) x 249.41(V) mm
www.panelook.com
Outline Dimension
Resolution
Pixel Pitch 0.32475 x 0.32475
Pixel Arrangement RGB vertical stripe
Display mode TN mode, Normally White
Display Colors 16.7M (6-bit + True Color FRC) Colors
Typical White Luminance 400 nit (typ.) @ 6.5mA [cd/m2]
Contrast Ratio 700:1(typ.)
Color Gamut 72%(typ.) of NTSC
Response Time 8ms(typ.) (Tr+Tf) ms
Viewing Angle (L/R/U/D) 80/80/70/70 CR>10
Power Consumption 44.4 W (typ.)(Vdd line +CCFL line)** W @6.5mA
Electronic Interface 1ch LVDS
Frame rate 60Hz(typ.), 75Hz(max.) Hz
Weight(g) 3000(max) g
Surface Treatment Hard-Coating 3H, AG
ROHS ROHS compliance
472.0(H)
276.5(V)23.0(D) (typ.)*
1366(R,G,B
3) x 768
mm Without inverter
Pixels
* The depth of module is 23mm typ. and 24mm max.
** To consider the loss of Inverter’s efficiency.
©Copyright AU Optronics, Inc.
March, 2006 All Rights Reserved. T200XW02 Ver1.2 6/26
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
2. Absolute Maximum Ratings
The foll owing are maximum values which, if exceeded, may cause faulty operation or damage to the
unit.
Item Symbol Min Max Unit Note
Logic/LCD Drive Voltage Vdd -0.3 6 [Volt] 1
Input Voltage of Signal Vin -0.3 3.6 [Volt] 1
Operating Temperature TOP 0 +50 [oC] 2
Operating Humidity HOP 10 90 [%RH] 2
Storage Temperature TST -20 +60 [oC] 2
Storage Humidity HST 10 90 [%RH] 2
www.panelook.com
Note 1 : Duration = 50msec
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
©Copyright AU Optronics, Inc.
March, 2006 All Rights Reserved. T200XW02 Ver1.2 7/26
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
s
µ
3. Electrical Specification
The T200XW02 requires two power inputs. One is employed to power the LCD electronics and to drive
the TFT array and liquid crystal. An inverter typically generates the second input, which powers the
CCFL.
3-1 Electrical Characteristics
www.panelook.com
ValuesParameter Symbol
Min Typ Max
LCD:
Power Supply Input Voltage Vdd 4.5 5.0 5.5 Vdc
Power Supply Input Current Idd - 0.72 0.9 A 1
Power Consumption Pc - 3.6 4.5 Watt 1
Inrush Current I
Backlight Power Consumption - 40.8 43.2 Watt 2
Total Power Consumption - 44.4 46.8 Watt 2
Life Time 50000 - - Hours 3
The performance of the Lamp in LCM, for example lifetime or brightness, is extremely influenced by
the characteristics of the DC-AC Inverter. So all the parameters of an inverter should be carefully
designed so as not to produce too much leakage current from high-voltage output of the inverter.
When you design or order the inverter, please make sure unwanted lighting caused by the mismatch
of the lamp and the inverter (no lighting, flicker, etc) never occurs. When you confirm it, the LCD
Assembly should be operated in the same condition as installed in your instrument.
Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting tape,
TFT-LCD Module have a low luminance and the inverter has abnormal action because leakage
RUSH
- - 2.0 A 1
Unit Notes
current occurs between lamp wire and conducting tape.
The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. At
temperatures greater than 40, the wet bulb temperature must not exceed 39 . When operate at
low temperatures, the brightness of CCFL will drop and the lifetime of CCFL will be reduced.
Note :
1. Vdd=5.0V, Fv=62Hz, f
The Power supply input check pattern definition and dissipation reference as below :
Dot pattern0.9A (Max.)
©Copyright AU Optronics, Inc.
March, 2006 All Rights Reserved. T200XW02 Ver1.2 8/26
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
CLK= 88MHz , 25, Vdd Duration time= 470
www.panelook.com
Loading...