Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
( V ) Preliminary Specifications
() Final Specifications
Module 15 Inch Color TFT-LCD
Model Name G150XG03 V5
Customer Date
Approved by Date
Checked &
Approved by
Note: This Specification is subject to change
without notice.
Vito Huang 2011/06/15
Prepared by
Wennie Lee 2011/06/15
Audio-Video Business Unit /
AU Optronics corporation
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
1/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
Contents
1. Operating Precautions.....................................................................................4
2. General Description.........................................................................................5
2.1 Display Characteristics...........................................................................................................5
2.2 Optical Characteristics ...........................................................................................................6
3. Functional Block Diagram ...............................................................................9
4. Absolute Maximum Ratings ..........................................................................10
4.1 Absolute Ratings of TFT LCD Module .................................................................................10
4.2 Absolute Ratings of Environment ........................................................................................10
5. Electrical Characteristics ..............................................................................11
5.1 TFT LCD Module.................................................................................................................. 11
5.2 Backlight Unit........................................................................................................................13
6. Signal Characteristic .....................................................................................14
6.1 Pixel Format Image ..............................................................................................................14
6.2 Scanning Direction ...............................................................................................................14
6.3 Signal Description ................................................................................................................15
6.4 The Input Data Format .........................................................................................................16
6.5 Interface Timing ....................................................................................................................18
6.6 Power ON/OFF Sequence ...................................................................................................19
7. Connector & Pin Assignment........................................................................20
7.1 TFT-LCD Signal: LVDS Interface Connector .......................................................................20
7.2 LED Backlight Unit: LED Driver Connector .........................................................................21
7.3 LED Driver Connector Pin Assignment ...............................................................................22
8. Reliability Test Criteria ..................................................................................23
9. Mechanical Characteristics ...........................................................................24
9.1 LCM Outline Dimension (Front View) ..................................................................................24
9.2 LCM Outline Dimension (Rear View)...................................................................................25
10. Label and Packaging....................................................................................26
10.1 Shipping Label (on the rear side of TFT-LCD display)......................................................26
10.2 Carton Package .................................................................................................................26
11 Safety.............................................................................................................27
11.1 Sharp Edge Requirements.................................................................................................27
11.2 Materials .............................................................................................................................27
11.3 Capacitors...........................................................................................................................27
11.4 National Test Lab Requirement..........................................................................................27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
2/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
Record of Revision
Version and Date Page Old description New Description
0.0 2011/6/8 All First Edition
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
3/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED Reflector edge. Instead,
press at the far ends of the LED Reflector edge softly. Otherwise the TFT Module may
be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt
the Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module
by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time.
14) Continuous operating TFT-LCD Module under high temperature environment may accelerate
LED light bar exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when TFT-LCD module is placed in
landscape position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or moving content periodically if fixed pattern is displayed on the screen.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
4/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
2. General Description
G150XG03 V5 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a
driver circuit, and a backlight system. The screen format is intended to support XGA (1024(H) x
768(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits). All input signals are LVDS
interface compatible. All design rules of this module can correspond to PSWG standard.
G150XG03 V5 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25
Items Unit Specifications
Screen Diagonal [inch] 15
Active Area [mm] 304.128(H) x 228.096(V)
condition:
Pixels H x V 1024x2, 768x2 (RGBW)
Pixel Pitch [mm] 0.297 x 0.297
Pixel Arrangement R.G.B.W. Rectangle
Display Mode TN, Normally White
Nominal Input Voltage VDD [Volt] 3.3 typ.
Typical Power Consumption [Watt] TBD
Weight [Grams] 1000g (max.)
Physical Size [mm] 326.5(H)x 253.5(V) x 13.1(D) (max.)
Electrical Interface 1 channel LVDS
Surface Treatment Anti-glare, Hardness 3H
Support Color 16.2M / 262K colors
Temperature Range
Operating
Storage (Non-Operating)
o
C]
[
o
C]
[
-30 to +85
-30 to +85
RoHS Compliance RoHS Compliance
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
5/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature):
Item Unit Conditions Min. Typ. Max. Note
White Luminance
Uniformity
Contrast Ratio
Cross talk
Response Time
Viewing Angle
Color / Chromaticity
Coordinates
(CIE 1931)
Color Gamut %
[cd/m2] 100% Dimming
(center point)
%
%
[msec]
[msec]
[msec]
[degree]
[degree]
[degree]
[degree]
9 Points
400 700 - 4
- TBD TBD 5
Rising
Falling
Raising + Falling
Horizontal (Right)
CR = 10 (Left)
Vertical (Upper)
CR = 10 (Lower)
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
200 250 - 1
75 80 - 1, 2, 3
-
- 2.3 -
- - 16
70
70
50
70
TBD TBD TBD
TBD TBD TBD
TBD TBD TBD
TBD TBD TBD
TBD TBD TBD
TBD TBD TBD
0.263 0.313 0.363
0.279 0.329 0.379
- 60 -
5.7 -
80
80
60
80
6
-
7
-
-
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture
Test Point Center
Environment < 1 lux
LCD Module
Measuring distance
Module Driving Equipment
SR_3 or
equivalent
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
6/27
www.panelook.com
Global LCD Panel Exchange Center
(CR)
g
g
A
A
www.panelook.com
G150XG03 V5
Note 2: Definition of 9 points position (Display active area : 304.128(H) x 228.096(V))
90 %
Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the maximum test
point luminance
Minimum Brightness of nine points
W9
=
Maximum Brightness of nine points
Note 4Κ Definition of contrast ratio (CR):
Ӭ
Contrast ratio
Note 5Κ Definition of cross talk (CT)
=
50 %
Bri
htness on the “White” state
Bri
htness on the “Black” state
10 %
10 %
50 %
90 %
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
1/2
184 gray level
B
1/6
1/6
1/2
1/2
2/3 1/3
’
1/6
B’
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
1/6
1/3
1/2
2/3
G150XG03 V5 rev 0.0
7/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
Note 6: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black”
(falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and
90% of amplitudes. Please refer to the figure as below.
Optical
Optical
response
response
Note 7: Definition of viewing angle
%
100
90
90
10
10
0
0
Tf Tr
White Black White
White Black White
Tr
vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal
left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the
display surface with the screen rotated to its center to develop the desired
measurement viewing angle.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
8/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
3. Functional Block Diagram
The following diagram shows the functional block of the 15 inch color TFT/LCD module:
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
9/27
www.panelook.com
Global LCD Panel Exchange Center
V
t
]
www.panelook.com
G150XG03 V5
4. Absolute Maximum Ratings
4.1 Absolute Ratings of TFT LCD Module
Item Symbol Min Max Unit
Logic/LCD Drive Voltage
4.2 Absolute Ratings of Environment
Item Symbol Min Max Unit
Operating Temperature TOP -30 +85 [oC]
Operation Humidity HOP 8 90 [%RH]
Storage Temperature TST -30 +85 [oC]
Storage Humidity HST
Note: Maximum Wet- no condensation.
in - 0.3 +3.6 [Vol
8 90
[%RH]
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
10/27
www.panelook.com
Global LCD Panel Exchange Center
V
www.panelook.com
G150XG03 V5
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Symbol Parameter Min Typ Max Units Remark
VDD
IDD
Irush
PDD
Logic/LCD Drive
Voltage
VDD Current - 1 - [A]
LCD Inrush Current
VDD Power 3.0 3.3 3.6 [Watt]
Note 1: Measurement condition:
(High to Low)
Control
Signal
+3.3V
3.0 3.3 3.6 [Volt]
- -
R1
47K
R2
D6
D5
D2 S
D1
G
3 [A]
Q3
AO6402
G
D2SD1D5
D6
Q3
AO6402
f10%
64 Gray Bar Pattern
(VDD=3.3V, at 60Hz)
Note 1
64 Gray Bar Pattern
(VDD=3.3V, at 60Hz)
F1
C1
1uF/16V
DD
VCC
(LCD Module Input)
1K
C3
0.01uF/25V
SW1
SW MAG-SPST
1 2
+12.0V
C2
1uF/25V
R2
1K
VR1
47K
90%
3.3V
10%
0V
500 us
VDD rising time
64 Gray pattern
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
11/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Symbol Item Min. Typ. Max. Unit Remark
VTH
VTL
ΨVIDΨ Input Differential Voltage
VICM
Note: LVDS Signal Waveform.
Differential Input High Threshold - - 100
Differential Input Low Threshold 100 - -
Differential Input Common Mode Voltage
100 400 600
1.15 1.2 1.45
[mV] VCM=1.2V
[mV] VCM=1.2V
[mV]
VTH/VTL=100mV
[V]
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
12/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
5.2 Backlight Unit
5.2.1 Parameter guideline for LED
Following characteristics are measured under stable condition using a LED driving board at 25 om Temperature).
Symbol Parameter Min Typ Max
Vcc Input Voltage 10.8 12 13.2 Volt
Ivcc Input Curent - TBD - A 100% Dimming
PLED Power Consumption - TBD - Watt 100% Dimming
FPWM PWM Dimming Frequency 200 - 20k Hz
Swing Voltage 3.3 - 5
Dimming Duty Cycle 5 - 100 %
IF LED Forward Current - 60 63 mA Ta = 25oC
Operating Life 30000 - - Hrs Ta = 25oC
Note 1: Ta means ambient temperature of TFT-LCD module.
Note 2: If G150XG03 V5 module is driven at high ambient temperature & humidity condition. The operating life will be
Unit
Remark
reduced.
Note 3: Operating life means brightness goes down to 50% initial brightness. Min. operating life time is estimated data.
.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
13/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship between input signal and LCD pixel format.
6.2 Scanning Direction
The following figures show the image seen from the front view. The arrow indicates the direction of scan.
AUO AUO
Fig. 1 Normal scan (Pin4, REV = Low or NC) Fig. 2 Reverse scan (Pin4, REV = High)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
14/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
6.3 Signal Description
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a differential
signal technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS83(negative
edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx)
transmits even pixels.
Input Signal Interface
Pin No. Symbol Description
1 VDD Power Supply, 3.3V (typical)
2 VDD Power Supply, 3.3V (typical)
3 GND Ground
4 REV Reverse Scan [H: Enable; L/NC: Disable]*Note1,3
5 Rin0- - LVDS differential data input
6 Rin0+ + LVDS differential data input
7 GND Ground
8 Rin1- - LVDS differential data input
9 Rin1+ + LVDS differential data input
10 GND Ground
11 Rin2- - LVDS differential data input
12 Rin2+ + LVDS differential data input
13 GND Ground
14 ClkIN- - LVDS differential clock input
15 ClkIN+ + LVDS differential clock input
16 GND Ground
17 Rin3- - LVDS differential data input *Note2
18 Rin3+ - LVDS differential data input *Note2
19 NC/GND Reserved for AUO internal test. Please set it as NC or Ground.
20 SEL68 Selection for 6 bits/8bits LVDS data input[H/NC: 6bits, L: 8bits]*Note1,3
Note 1: Input signals shall be in low status when VDD is off.
Note 2: For 6bits input mode, pin 17 and pin 18 must be floated.
Note 3: High stands for “3.3V”, Low stands for “GND”, NC stands for “No Connection”.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
15/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
6.4 The Input Data Format
6.4.1 SEL68
SEL68 = ”High” or “NC” for 6 bits LVDS Input
SEL68 = “Low” for 8 bits LVDS Input
Signal Name Description Remark
R7
R6
R5
R4
R3
R2
R1
R0
G7
G6
G5
G4
G3
G2
G1
G0
Red Data 7
Red Data 6
Red Data 5
Red Data 4
Red Data 3
Red Data 2
Red Data 1
Red Data 0
Green Data 7
Green Data 6
Green Data 5
Green Data 4
Green Data 3
Green Data 2
Green Data 1
Green Data 0
Red-pixel Data
For 6Bits LVDS input
MSB: R5 ; LSB: R0
For 8Bits LVDS input
MSB: R7 ; LSB: R0
Green-pixel Data
For 6Bits LVDS input
MSB: G5 ; LSB: G0
For 8Bits LVDS input
MSB: G7 ; LSB: G0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
16/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
B7
B6
B5
B4
B3
B2
B1
B0
RxCLKIN LVDS Data Clock The typical frequency is 65MHz. The
DE Data Enable Signal When the signal is high, the pixel data
Note: Output signals from any system shall be low or Hi-Z state when VDD is off.
Blue Data 7
Blue Data 6
Blue Data 5
Blue Data 4
Blue Data 3
Blue Data 2
Blue Data 1
Blue Data 0
Blue-pixel Data
For 6Bits LVDS input
MSB: B5 ; LSB: B0
For 8Bits LVDS input
MSB: B7 ; LSB: B0
signal is used to strobe the pixel data and
DE signals. All pixel data shall be valid at
the falling edge when the DE signal is
high.
shall be valid to be displayed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
17/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
6.5 Interface Timing
6.5.1 Timing Characteristics
Signal Parameter Symbol Min. Typ. Max. Unit
Clock Timing Clock frequency 1/ T
Vsync Timing Vertical
Section
Period T
Active T
Blanking T
Hsync Timing Horizontal
Section
Period T
Active T
Blanking T
Frame Rate F
Note:
1. Frame rate is 60 Hz.
2. Typical value refer to VESA Standard
Clock
V
VD
VB
H
HD
HB
50 65 80
776 806 1023
- 768 -
8 38 255
1074 1344 2047
- 1024 -
50 320 1023
50 60 75
MHz
T
Line
T
Clock
Hz
6.5.2 Input Timing Diagram
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
18/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
6.6 Power ON/OFF Sequence
VDD power and LED on/off sequence is as below. Interface signals are also shown in the chart. Signals from any
system shall be Hi-Z state or low level when VDD is off.
Power ON/OFF sequence timing
Parameter
Min. Typ. Max.
T1 0.5 - 10 [ms]
T2 30 40 50 [ms]
T3 200 - - [ms]
T4 0.5 - 10 [ms]
T5 10 - - [ms]
T6 10 - - [ms]
T7 0 - - [ms]
T8 10 - - [ms]
T9 - - 10 [ms]
T10 110 - - [ms]
T11 0 16 50 [ms]
T12 - - 10 [ms]
Value
Units
T13 1000 - - [ms]
The above on/off sequence should be applied to avoid abnormal function in the display. Please
make sure to turn off the power when you plug the cable into the input connector or pull the cable
out of the connector.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
19/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
7. Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of accommodating
the following signals and will be following components.
7.1 TFT-LCD Signal: LVDS Interface Connector
Connector Name / Designation Signal Connector
Manufacturer STM or compatible
Connector Model Number MSB240420-E
Mating Housing Part Number P240420 or compatible
Pin# Signal Name Pin# Signal Name
1
3
5
7
9
11
13
15
17
19
VDD
GND
Rin0-
GND
Rin1+
Rin2-
GND
ClkIN+
Rin3-
NC/GND
2 VDD
4 REV
6
8 Rin1-
10 GND
12 Rin2+
14
16 GND
18 Rin3+
20 SEL68
Rin0+
ClkIN-
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
20/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
7.1.1 Connector Illustration
SEL68
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
21/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
7.2 LED Backlight Unit: LED Driver Connector
Connector Name / Designation LED Connector
Manufacturer E&T or compatible
Connector Model Number 3808K-F05N-02R or compatible
Mating Connector Model Number H208K-P05N-02B or compatible
7.3 LED Driver Connector Pin Assignment
Pin# Symbol Signal Name
1 Vcc 12V
2 GND GND
3 Enable 5V-On / 0V-Off
4 Dimming 3.3V or 5V PWM Dimming
5 NC NC
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
22/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
8. Reliability Test Criteria
Items
Temperature
Humidity Bias
High Temperature
Operation
Low Temperature
Operation
Hot Storage
Cold Storage
Thermal Shock
Test
Shock Test
(Non-Operating)
Vibration Test
(Non-Operating)
On/off test
Required Condition Note
50
80%,300 hours
,300 hours
85
,300 hours
-3
85
-3
-2
50G,20ms,Half-sine wave,( ±X, ±Y, ±Z)
1.5G, (10~200Hz, P-P)
30 mins/axis (X, Y, Z)
On/10 sec, Off/10 sec, 30,000 cycles
ESD
Note1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost
. Self-recoverable. No hardware failures.
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ point
Note 1
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ point
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
23/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
24/27
G150XG03 V5 rev 0.0
G150XG03 V5
9.1 LCM Outline Dimension (Front View)
9. Mechanical Characteristics
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
25/27
G150XG03 V5 rev 0.0
G150XG03 V5
9.2 LCM Outline Dimension (Rear View)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
10. Label and Packaging
10.1 Shipping Label
(on the rear side of TFT-LCD display)
10.2 Carton Package
G150XG03 V5
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
26/27
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG03 V5
11 Safety
11.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.
11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used,
they will be reviewed and approved by the responsible AUO toxicologist.
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the
module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability
rating will be printed on the printed circuit board.
11.3 Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them from
being inserted backwards.
11.4 National Test Lab Requirement
The display module will satisfy all requirements for compliance to:
UL 1950, First Edition U.S.A. Information Technology Equipment
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG03 V5 rev 0.0
27/27
www.panelook.com
Loading...