AUO G150XG01 V4 Specification
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V4
( V ) Preliminary Specifications
( ) Final Specifications
Module 15 Inch Color TFT-LCD
Model Name G150XG01 V4
Customer Date
Approved by Date
Checked &
Approved by
Note: This Specification is subject to change
without notice.
Vito Huang 2011/04/11
Prepared by
Linda Lee 2011/04/11
Audio-Video Business Unit /
AU Optronics corporation
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG01 V4 rev 0.1
1/30
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V4
Contents
1. Operating Precautions.....................................................................................4
2. General Description.........................................................................................5
2.1 Display Characteristics...........................................................................................................5
2.2 Touch
Characteristics…………………………………………………………..…..…………………………….6
2.3 Optical Characteristics ...........................................................................................................7
3. Functional Block Diagram .............................................................................11
4. Absolute Maximum Ratings ..........................................................................12
4.1 Absolute Ratings of TFT LCD Module .................................................................................12
4.2 Absolute Ratings of Environment ........................................................................................12
5. Electrical Characteristics ..............................................................................13
5.1 TFT LCD Module..................................................................................................................13
5.2 Backlight Unit........................................................................................................................15
5.3 Touch
Unit…
…………………………………………………………………………..……………..…………….15
6. Signal Characteristic .....................................................................................16
6.1 Pixel Format Image ..............................................................................................................16
6.2 Scanning Direction ...............................................................................................................16
6.3 Signal Description ................................................................................................................17
6.4 The Input Data Format .........................................................................................................18
6.5 Interface Timing ....................................................................................................................20
6.6 Power ON/OFF Sequence ...................................................................................................21
7. Connector & Pin Assignment........................................................................23
7.1 TFT-LCD Signal: LVDS Interface Connector .......................................................................23
7.2 LED Backlight Unit: LED Driver Connector .........................................................................25
7.3 LED Driver Connector Pin Assignment ...............................................................................25
8. Reliability Test Criteria ..................................................................................26
9. Mechanical Characteristics ...........................................................................27
9.1 LCM Outline Dimension (Front View) ..................................................................................27
9.2 LCM Outline Dimension (Rear View)...................................................................................28
10. Label and Packaging....................................................................................29
10.1 Shipping Label (on the rear side of TFT-LCD display)......................................................29
10.2 Carton Package .................................................................................................................29
11 Safety.............................................................................................................30
11.1 Sharp Edge Requirements.................................................................................................30
11.2 Materials .............................................................................................................................30
11.3 Capacitors...........................................................................................................................30
11.4 National Test Lab Requirement..........................................................................................30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG01 V4 rev 0.1
2/30
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Record of Revision
Version and Date Page Old description New Description
Rev 0.1 2011/4/11 All First Edition
G150XG01 V4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG01 V4 rev 0.1
3/30
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V4
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED Reflector edge. Instead,
press at the far ends of the LED Reflector edge softly. Otherwise the TFT Module may
be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module
by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time.
14) Continuous operating TFT-LCD Module under high temperature environment may accelerate
LED light bar exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when TFT-LCD module is placed in
landscape position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or moving content periodically if fixed pattern is displayed on the screen.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG01 V4 rev 0.1
4/30
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V4
2. General Description
G150XG01 V4 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a
touch sensor glass, a driver circuit, and a backlight system. The screen format is intended to
support XGA (1024(H) x 768(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits). All
input signals are LVDS interface compatible. All design rules of this module can correspond
to PSWG standard.
G150XG01 V4 is designed for industrial display applications.
2.1 Display Characteristics
he following items are characteristics summary on the table under 25 oC condition:
T
Item Unit Specifications
Screen Diagonal [inch] 15
Active Area [mm] 304.128(H) x 228.096(V)
Pixels H x V 1024x2, 768x2 (RGBW)
Pixel Pitch [mm] 0.297 x 0.297
Pixel Arrangement R.G.B.W. Rectangle
Display Mode TN, Normally White
Nominal Input Voltage VDD [Volt] 3.3 typ.
Typical Power Consumption [Watt] 9.63 ( 64 Gray Bar pattern)
Weight [Grams] 1120g (max.)
Physical Size [mm] 326.5(H)x 253.5(V) x 15.5(D) (max.)
Electrical Interface 1 channel LVDS
Support Color 16.2M / 262K colors
Temperature Range
Operating
Storage (Non-Operating)
o
[
C]
[oC]
-10 to +60
-30 to +85
RoHS Compliance RoHS Compliance
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG01 V4 rev 0.1
5/30
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V4
2.2 Touch Characteristics
The following items are characteristics summary on the table under 25 oC condition:
Item Unit Specifications
Type of Touch Sensor Charge-Sensing (Capacitive) Type
Panel Size [mm] 323.5(W) x 250.5 (H) x 0.7 (T)
Sensor Active Area [mm]
Interface USB
IC Driver ( Sensor) TangoF32
Channel [ch] X:42 Y:31
Surface hardness [H] 7
Maximum touch points
304.128 (W) x 228.096 (H)
1 (10mm Cover Lens)
2 (3 mm Cover Lens)
Touch Resolution [ppi] 3.44
Touch Active Area [mm] 304.128 (W) x 228.096 (H)
Touch Sensor Pitch [mm] 7.256 (W) X 7.378 (H)
Touch Method [mm] Capacitance sensor
Single/Multi-points Accuracy [mm] +/-1.5mm
Jitter [mm] +/- 4mm
Offset [mm] +/- 1mm
Theʳsmallest distance between 2
points
Sample rate at 10/5/1 point [Hz]
Touch sensing height [mm] Up to 10mm
Interface USB
TP Controller 3TangoF32+ATmega32U2
Number of X / Y Channel 42 /31
Resolution X / Y [Dot] 21504 / 15872
Support Point
[mm] 2.2mm
60HZ (1 finger)
45HZ (2 finger)
1 Finger (10 mm Cover Lens) /
2 Finger (3 mm Cover Lens)
Power Consumption [mWatt] 91 (typ.)
Electrical Interface PIXCIR- 500kbps USB Type
OS Support Win7 / WinXP (Figure 1)
Operating Temperature Range [oC] -10 to +60
Transparency [%] 90
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG01 V4 rev 0.1
6/30
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V4
Figure 1:
Except Window 7 application, the driver is necessary to be installed before operating. Available drivers are listed as
below.
Driver
OS Kernal
Windows CE 6.0 ʳ
Windows XP ʳʳʳʳ
Windows Vista ʳʳʳʳ
Windows 7 start ʳʳʳʳ
Linux
ʳ
ʳ
ʳ
2.6.28
2.6.31
2.6.32
2.6.29.
USB
Hardware Software
ARM11 / Cotex-A8 6.0 Note 1
X86 SP3 Note 1
X86 Embedded Note 1
X86 Win 7 start No driver is required
X86/ARM Ubuntu 9.04 Note 1
X86/ARM Ubuntu 9.10 Note 1
X86/ARM Ubuntu 10.04 Note 1
X86/ARM Fedora Note 1
ATOM-X86 Android 1.6-X86 Support Single Touch
Remark
Android
Note 1:
The default code is used for one point touch with 10 mm (thick) vandal glass.
For panels used with 3 mm vandal glass for dual–point touch, a separate code is required to be installed.
2.6.29. ARM9 Android 2.0/2.1
2.6.29.
ARM11 Android 2.0/2.1
Note 1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG01 V4 rev 0.1
7/30
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
2.3 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 oC (Room Temperature):
Item Unit Conditions
White Luminance [cd/m2]
Uniformity
Contrast Ratio
Cross talk %
Response Time
Viewing Angle
Color / Chromaticity
Coordinates
(CIE 1931)
%
[msec] Rising
[msec] Falling
[msec] Raising + Falling
[degree]
[degree]
[degree]
[degree]
100% Dimming
(center point)
9 Points
400
- 1.2 1.5 5
Horizontal (Right)
CR = 10 (Left)
Vertical (Upper)
CR = 10 (Lower)
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
Min. Typ. Max. Note
280 350 - 1
75 80 - 1, 2, 3
700
-
- 2.3
- 8
70
70
50
70
0.577 0.627
0.298 0.348
0.288 0.338
0.539 0.589
0.100 0.150
0.029 0.079 0.129
0.263 0.313 0.363
0.279 0.329
5.7
80
80
60
80
0.677
0.398
0.388
0.639
0.200
0.379
G150XG01 V4
-
-
-
-
-
4
6
7
Color Gamut % - 60 -
Gamma Value
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture
Test Point Center
Environment < 1 lux
LCD Module
Module Driving Equipment
Measuring distance
- 2.2 - 8
SR_3 or
equivalent
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G150XG01 V4 rev 0.1
8/30
www.panelook.com
Global LCD Panel Exchange Center
(CR)
g
g
A
A
www.panelook.com
G150XG01 V4
Note 2: Definition of 9 points position (Display active area : 304.128(H) x 228.096(V))
90 %
Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the maximum test
point luminance
50 %
Minimum Brightness of nine points
W9
=
Maximum Brightness of nine points
htness on the “White” state
Bri
=
htness on the “Black” state
Bri
Note 4Κ Definition of contrast ratio (CR):
Ӭ
Contrast ratio
N
ote 5Κ Definition of cross talk (CT)
10 %
10 %
50 %
90 %
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray leve
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
1/2
184 gray level
1/6
1/6
1/2
B
l 0 pattern (cd/m2)
2/3 1/3
1/2
’
1/6
B’
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
1/6
1/3
1/2
2/3
G150XG01 V4 rev 0.1
9/30
www.panelook.com
Loading...