AUO G150XG01 V1 Specification
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V1
( ) Preliminary Specifications
(V ) Final Specifications
Module
Model Name
Customer Date
15 Inch Color TFT-LCD
G150XG01 V1
Approved by Date
Checked &
Approved by
Note: This Specification is subject to change
without notice.
Debbie Chiu
Prepared by
2010/03/08
Hsiao Chun Lin 2010/03/08
General Display Business Division /
AU Optronics corporation
G150XG01 V1 rev. 1.4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
1/28
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V1
Contents
1. Operating Precautions..................................................................................... 4
2. General Description ......................................................................................... 5
2.1 Display Characteristics ...................................................................................................... 5
2.2 Optical Characteristics ....................................................................................................... 6
3. Functional Block Diagram ............................................................................... 9
4. Absolute Maximum Ratings........................................................................... 10
4.1 Absolute Ratings of TFT LCD Module.............................................................................. 10
4.2 Absolute Ratings of Environment..................................................................................... 10
5. Electrical Characteristics............................................................................... 11
5.1 TFT LCD Module ............................................................................................................. 11
5.2 Backlight Unit................................................................................................................... 13
6. Signal Characteristic...................................................................................... 15
6.1 Pixel Format Image..........................................................................................................15
6.2 Scanning Direction........................................................................................................... 15
6.3 Signal Description ............................................................................................................ 16
6.4 The Input Data Format..................................................................................................... 17
6.5 Interface Timing ............................................................................................................... 18
6.6 Power ON/OFF Sequence ............................................................................................... 19
7. Connector & Pin Assignment ........................................................................ 20
7.1 TFT LCD Module: LVDS Connector................................................................................. 20
7.2 Backlight Unit: Lamp Connector ......................................................................................22
7.3 Lamp Connector Pin Assignment..................................................................................... 22
8. Reliability Test Criteria................................................................................... 23
9. Mechanical Characteristics ........................................................................... 24
9.1 LCM Front View and Rear View....................................................................................... 24
9.2 LCM Outline Dimension (Front View)............................................................................... 25
9.3 LCM Outline Dimension (Rear View) ............................................................................... 26
10. Label and Packaging.................................................................................... 27
10.1 Shipping Label (on the rear side of TFT-LCD display)................................................... 27
10.2 Carton Package .............................................................................................................27
11 Safety.............................................................................................................. 28
11.1 Sharp Edge Requirements............................................................................................. 28
11.2 Materials......................................................................................................................... 28
11.3 Capacitors ...................................................................................................................... 28
11.4 National Test Lab Requirement ...................................................................................... 28
G150XG01 V1 rev. 1.4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
2/28
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V1
Record of Revision
Version and Date Page Old description New Description
0.0 2007/05/15 All First Edition
0.1 2007/08/17 All Final Version
0.2 2007/10/01 23
0.3 2008/05/13 26 Outline Dimension ( T60: N/A)
0.4 2008/06/25 27
1.0 2008/06/25 All Final Version
1.1 2008/10/29 5 Weight & Physical Size: (typ.) Weight & Physical Size: (max.)
10 LCD Drive Voltage: Min: 0.3 (V)
10 TOP: 65 C TOP: 65 C (panel surface temperature)
21 Removed connector illustration
22 Mating Model Number: SM02 Mating Model Number: SM03
24 Update with more detail labeling
25 Update with more detail labeling
26 Update with more detail labeling
1.2 2009/01/09 6 Viewing Angle: 70/70/65/55(R/L/T/B) Viewing Angle: 80/80/70/60(R/L/T/B)
18 Note on frame rate is removed N/A
1.3 2009/09/02 27 Add China RoHs mark on shipping label
1.4 2010/03/04 4
Hot Storage: 60
Heat Shrink Tube: 90mm
15pcs * 1 layers
Min: 3.6 (V)
Temperature Range
Operating: 0 to +65 (+65
surface temperature)
Storage (Non-Operating): -20 to +65
22
Reliability Test Criteria
High Temperature Operation: 60
hours
Low Temperature Operation: 0
hours
Hot Storage: 65
Cold Storage: -20
к
Hot Storage: 65к
Outline Dimension ( T60: 15mm)
Heat Shrink Tube: 110mm
o
C as panel
12pcs * 1 layers
LCD Drive Voltage: Min: - 0.3 (V)
Max: 4.0 (V)
Operating: -30 to +85 (+85 oC as panel
surface temperature)
Storage (Non-Operating): -30 to +85
High Temperature Operation: 85
к
,300
hours
Low Temperature Operation: -30
к
,300
hours
Hot Storage: 85
к
,300 hours
к
,300 hours
Cold Storage: -30
к
,300 hours
к
,300 hours
к
к
,300
,300
G150XG01 V1 rev. 1.4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
3/28
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V1
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the CCFL Reflector edge. Instead,
press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may
be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow
local ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit
(IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit.
15) Severe temperature condition may result in different luminance, response time and lamp
ignition voltage.
16) Continuous operating TFT-LCD display under low temperature environment may accelerate
lamp exhaustion and reduce luminance dramatically.
17) The data on this specification sheet is applicable when LCD module is placed in landscape
position.
18) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or shuffle content periodically if fixed pattern is displayed on the screen.
G150XG01 V1 rev. 1.4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
4/28
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V1
2. General Description
G150XG01 V1 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a
driver circuit, and a backlight system. The screen format is intended to support XGA (1024(H) x
768(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits). All input signals are LVDS
interface compatible. Inverter card of backlight is not included. All design rules of this module
can correspond to PSWG standard.
G150XG01 V1 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25
Items Unit Specifications
Screen Diagonal [inch] 15
Active Area [mm] 304.128(H) x 228.096(V)
к
condition:
Pixels H x V 1024x3(RGB) x 768
Pixel Pitch [mm] 0.297 x 0.297
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode TN, Normally White
Nominal Input Voltage VDD [Volt] 3.3 typ.
Typical Power Consumption [Watt] 8.9 ( 64 Gray Bar Pattern , exclude inverter)
Weight [Grams] 1100g (max.)
Physical Size [mm] 326.5(H)x 253.5(V) x 12.0(D) (max.)
Electrical Interface 1 channel LVDS
Surface Treatment Anti-glare, Hardness 3H
Support Color 16.2M / 262K colors
Temperature Range
Operating
Storage (Non-Operating)
o
C]
[
o
C]
[
-30 to +85 (+85
temperature)
ˆ
0 to +85
-
o
C as panel surface
RoHS Compliance RoHS Compliance
G150XG01 V1 rev. 1.4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
5/28
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25к (Room Temperature):
Item Unit Conditions Min. Typ. Max. Note
White Luminance
Uniformity
Contrast Ratio
Cross talk
Response Time
Viewing Angle
Color / Chromaticity
Coordinates
(CIE 1931)
Color Gamut %
[cd/m2]
%
%
[msec]
[msec]
[msec]
[degree]
[degree]
[degree]
[degree]
IRCFL= 5.5mA
(center point)
9 Points
400 700 - 4
- 1.2 1.5 5
Rising
Falling
Raising + Falling
Horizontal (Right)
CR = 10 (Left)
Vertical (Upper)
CR = 10 (Lower)
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
300 350 - 1
75 80 - 1, 2, 3
-
- 2.3
- 8
70
70
60
50
˃ˁˉ˄˅
˃ˁˆ˃ˊ
˃ˁ˅ˊˉ
˃ˁˈˈ˄
˃ˁ˄˄ˇ
˃ˁ˃ˊ˄
˃ˁ˅ˋˆ
˃ˁ˅ˌˌ
65 -
5.7
80
80
70
60
ʳ
0.642
ʳ
0.337
ʳ
0.306
ʳ
0.581
ʳ
0.144
ʳ
0.101
ʳ
0.313
ʳ
0.329
-
-
-
-
˃ˁˉˊ˅
˃ˁˆˉˊ
˃ˁˆˆˉ
˃ˁˉ˄˄
˃ˁ˄ˊˇ
˃ˁ˄ˆ˄
˃ˁˆˇˆ
˃ˁˆˈˌ
G150XG01 V1
6
7
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture 1 with 50cm viewing distance
Test Point Center
Environment < 1 lux
ш
LCD Module
SR_3 or
equivalent
Measuring distance
Module Driving Equipment
G150XG01 V1 rev. 1.4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
6/28
www.panelook.com
Global LCD Panel Exchange Center
(CR)
g
www.panelook.com
G150XG01 V1
Note 2: Definition of 9 points position (Display active area : 304.128(H) x 228.096(V))
90 %
Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the
maximum test point luminance
Minimum Brightness of nine points
Note 4
Ӭ
Κ
Definition of contrast ratio (CR):
Contrast ratio
W9
=
Maximum Brightness of nine points
Κ
Note 5
Definition of cross talk (CT)
50 %
10 %
Brightness on the “White” state
=
Bri
htness on the “Black” state
10 %
50 %
90 %
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
1/2
A
184 gray level
B
1/6
1/6
1/2
1/2
2/3 1/3
A’
1/6
B’
G150XG01 V1 rev. 1.4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
1/6
1/3
1/2
2/3
7/28
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V1
Note 6: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black”
(falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and
90% of amplitudes. Please refer to the figure as below.
Optical
Optical
response
response
%
100
90
90
10
10
0
0
Tf
White Black White
White Black White
Tr
Tr
Note 7: Definition of viewing angle
Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180° horizontal and 180°
vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (ș)
horizontal left and right, and 90° (ĭ) vertical high (up) and low (down). The measurement direction is typically
perpendicular to the display surface with the screen rotated to its center to develop the desired
viewing angle.
Њ
measurement
G150XG01 V1 rev. 1.4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
8/28
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
3. Functional Block Diagram
The following diagram shows the functional block of the 15 inch color TFT/LCD module:
LVDS
+ 3.3V
Connector
DC/DC
Converter
LVDS
Correction
AU ASIC
Gamma
Timing
Controller
RSDS
DC POWER
G1
Inverter
Source Driver IC
Gate Driver IC
1024(3)*768
G150XG01 V1
2 CCFL
D3072
TFT-LCD
Pixels
3804-F20N-06R / MSB240420E JST-BHR-03VS-1
Mating Type: HRS DF14-20S-1.25C SM03B-BHS-1R
G768
G150XG01 V1 rev. 1.4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
9/28
www.panelook.com
Loading...