AUMA D2 User Manual EN
Model D...
Operating Instructions
Servomotors
2019-02-19
BA-Stellmotor-D-02d
The reproduction, distribution and utilization of this
document as well as the communication of its contents
Offenders will be held liable for the payment of
damages. All rights reserved in the event of the grant of
Copyright reserved
Technical Documentation SAACKE
Original Manual
to others without express authorization is prohibited.
a patent, utility model or design.
Technology with a Future
research and development, ensure
Power of innovation, technical
perfection and reliability of all products
account for SAACKE’s technological
leadership. Competent project
management, comprehensive
operational advice, and a worldwide
proximity and partnership with a
guaranteed future within the industrial
worldwide -
For more than 80 years SAACKE has set
standards in economic, eco-friendly and
easy-to-service burner technology.
First-rate engineering and continuous
optimization of products and systems,
supported by extensive in-house
requirements and sustain flexibility.
service network stand for customer
thermal market.
Contents
Model D...
Servomotors
0 Contents
0 Contents ................................................................................................................................................................. 4
1 About this Document ............................................................................................................................................. 5
2 Safety ...................................................................................................................................................................... 6
2.1 Documentation is a part of the product! ................................................................................................................... 6
2.2 Symbols ................................................................................................................................................................... 6
2.3 Safety in General ..................................................................................................................................................... 6
2.4 Intended Use ............................................................................................................................................................ 7
2.5 Limitation of Liability ................................................................................................................................................. 7
2.6 Qualified Staff .......................................................................................................................................................... 7
2.7 Electrical Hazards .................................................................................................................................................... 7
3 Transport, Storage and Packing ........................................................................................................................... 8
3.1 Checking the Delivery .............................................................................................................................................. 8
3.2 Reporting Transport Damage ................................................................................................................................... 8
3.3 Instructions for Storage ............................................................................................................................................ 8
3.4 Disposal of the Packaging........................................................................................................................................ 8
3.5 Disposal of the Product ............................................................................................................................................ 8
4 Scope of Delivery ................................................................................................................................................... 9
5 Function ..................................................................................................................................................................
6 Variants ................................................................................................................................................................. 10
6.1 Nominal Torque ..................................................................................................................................................... 10
6.2 Rotation Angle ....................................................................................................................................................... 10
6.3 Air Conditioning Equipment.................................................................................................................................... 10
6.3.1 Air Conditioning Equipment D 012 / 025 / 040 / 040h ........................................................................... 10
6.3.2 Air Conditioning Equipment D 100 ........................................................................................................ 11
6.4 Actuation Time ....................................................................................................................................................... 11
7 Maintenance ......................................................................................................................................................... 12
8 Design ................................................................................................................................................................... 13
8.1 D 006 – Exterior Views .......................................................................................................................................... 13
8.2 D 012 / 025 / 040 / 040h – Exterior Views .............................................................................................................. 13
8.3 D 100 – Exterior Views .......................................................................................................................................... 14
8.4 Position Indicator (D 006 / 012 / 025 / 040 / 040h only) ......................................................................................... 15
8.5 Driven Shaft ........................................................................................................................................................... 16
9 Dimensions / Types / Technical Data ................................................................................................................. 17
9.1 All Types: Notes for Outdoor Installations .............................................................................................................. 17
9.2 D006 ...................................................................................................................................................................... 18
9.3 D012 ...................................................................................................................................................................... 20
9.4 D 025 / 040 / 040h ................................................................................................................................................. 22
9.5 D 100 ..................................................................................................................................................................... 24
Potentiomet er
9
4 / 28
Technical Documentation
BA-Stellmotor-D-02d 2019-02-19
Model D...
Servomotors
About this Document
1 About this Document
This document describes the following SAACKE servomotors:
D 006
D 012
D 025
D 040
D 040h
D 100
Please read this document and the safety instructions it contains carefully before
working with the servomotor.
2019-02-19
Technical Documentation
BA-Stellmotor-D-02d 5 / 28
Safety
Model D...
Servomotors
2 Safety
2.1 Documentation is a part of the product!
This document is an integral part of the product. It must be retained for the entire
service life of the product. Make this document available to the staff responsible for
the work described in it. Add any updates you receive later from SAACKE to the
document.
Help us improve this documentation!
We appreciate any feedback that improves the quality of our documentation. You
will find our address on the back of this document.
2.2 Symbols
Especially important information in this document is highlighted by the
corresponding symbols:
Warning!
The industrial safety symbol identifies safety instructions whose purpose is to
prevent physical injury or death. Follow these safety instructions carefully and be
especially cautious during the work/procedures they refer to.
Warning! Risk of death from electric shock!
The electricity symbol identifies safety instructions whose purpose is to prevent
physical injury or death from electric shock. Follow these safety instructions
carefully and be especially cautious during the work/procedures they refer to.
Caution!
The caution symbol identifies all safety warnings whose purpose is to prevent
damage or destruction of the product and/or other plant components.
Note
This points to information or notes that are especially useful.
2.3 Safety in General
The "Safety" chapter gives you an overview of the safety aspects you must pay
attention to in order to work with the product safely. Any individual who assembles,
installs, mounts, commissions, operates and/or does maintenance on the product
described must read and follow the instructions in this chapter carefully to avoid
physical injury and material damage. Your safety is at stake.
In addition to these general safety instructions you will find specific safety
instructions in the product documentation related to individual actions or
procedures.
6 / 28
Technical Documentation
BA-Stellmotor-D-02d 2019-02-19
Model D...
Servomotors
Safety
Only if you follow all of the safety instructions will you be able to provide the best
possible protection for yourself, your colleagues and the environment by ensuring
that the product functions safely and reliably.
In addition to this, it is imperative that you comply with the accident prevention and
2.4 Intended Use
2.5 Limitation of Liability
2.6 Qualified Staff
safety regulations of the country you are working in.
The product supplied must only be used in a coherent plant configuration. A plant
configuration is coherent if the product supplied is the equivalent of the plant
component it replaces or it is used according to the manufacturer's specifications.
You can verify this by checking the technical data given in this document.
SAACKE shall not be held liable for damage resulting from any use of the product
other than its intended one, from ignoring the documentation or from operation by
inadequately qualified staff. The risk in this case lies with the operator / plant
authorities alone.
Warning!
Risk of physical injury and damage from incorrect operation!
The plant authorities must ensure that only qualified and authorized staff works
with the product.
Qualified staff in the context of this documentation are individuals who have the
training that enables them to handle the product described and are authorized by
the plant authorities to assemble, install, mount, commission, operate and/or do
maintenance on the product.
2.7 Electrical Hazards
Warning! Risk of death from electric shock!
Damaged lagging or live components that are not covered correctly present a risk
of death from electric shock!
Warning! Risk of death from electric shock!
Carelessness can lead to an electric shock.
This is why when you work with electrical equipment, you must always first:
1. Disconnect each piece of equipment from the mains.
2. Secure it to prevent it from being switched back on.
3. Check that the equipment is de-energized.
4. Ground the equipment and short-circuit it.
5. Cover other components/equipment nearby that are energized.
6 Secure the danger zone, for example by blocking it off and/or putting up a
Transport
conspicuous danger sign that no one can overlook.
2019-02-19
Technical Documentation
BA-Stellmotor-D-02d 7 / 28
Transport, Storage and Packing
Model D...
Servomotors
3 Transport, Storage and Packing
3.1 Checking the Delivery
SAACKE products are packed and checked before they leave the factory.
When the product is delivered, first check whether the packaging is intact. This
would be the first indication that it has been transported correctly.
Check the product for transport damage.
3.2 Reporting Transport Damage
If damage has occurred during transport, follow these procedures:
Record the transport damage on the freight documents and take a
photograph and/or make a sketch of it.
Have the person responsible for the delivery (for example the truck driver)
confirm that the damage was noticed by signing the freight documents.
Report the transport damage right away to SAACKE or whichever company
supplied the product.
3.3 Instructions for Storage
Store the product on safe and firm ground.
Keep the product dry, free of dust and at the correct temperature during storage.
The relative humidity must be below 80 %.
Protect the product with appropriate covering in the case of a long storage period.
Preserve all metal surfaces.
3.4 Disposal of the Packaging
Dispose of all packaging correctly and ecologically.
When you do it, comply with the waste disposal regulations of the country in which
you are working.
3.5 Disposal of the Product
At the end of its service life the product must be disposed of correctly and
ecologically.
When you do it, comply with the waste disposal regulations of the country in which
you are working.
8 / 28
Technical Documentation
BA-Stellmotor-D-02d 2019-02-19
Model D...
Servomotors
Scope of Delivery
4 Scope of Delivery
Scope of delivery includes the following items
the servomotor
this document
5 Function
SAACKE servomotors are important components of a burner and/or a firing plant.
They are interlocked with the following actuators and activate e.g.
A mechanical compound regulation
Air control dampers
Fuel flow controller
Stabilizing disk travel mechanisms
Flue gas dampers
All servomotors are connected electrically to the burner control system. They
feature signaling devices (signal switches / potentiometers) which signal the
position of the servomotor – and therefore also the position of the activated
actuator – back to the burner control system.
In this way the servomotors not only move the actuators, but also supply the burner
control system with the required feedback on their current position.
2019-02-19
Technical Documentation
BA-Stellmotor-D-02d 9 / 28
Loading...