Aukey BR-O8 User Manual

User Manual

2-in-1 Wireless Transmitter and Receiver

Contents

English

01 ~ 13

Italiano

50 ~ 61

Deutsch 14 ~ 25

Français

26 ~ 37

Español

38 ~ 49

- 01 -

Thank you for purchasing the AUKEY BR-O8 2-in-1 Wireless Transmitter and Receiver.
Please read this user manual carefully and keep it for future reference. If you need
any assistance, please contact our support team with your product model number
and Amazon order number.

Package Contents

2-in-1WirelessTransmitter and Receiver

Micro-USB Cable

3.5mm Audio Cable

3.5mm to RCA Audio Cable
Toslink Optical Cable
User Manual
Warranty Card

Model

Technology

Frequency Range

Input

Operating Range

Dimensions

Weight

BR-O8

BT 5.0, aptX, aptX-LL

2.402GHz – 2.480GHz

DC 5V

Up to 50m / 164ft

113 x 110 x 73mm / 4.45” x 4.33” x 2.87”

300g / 10.58oz

- 02 -

Specifications

- 03 -

Product Diagram

Bypass Mode

Receiver Mode

3.5mm Audio Output
Optical Output

Powered Off

BT Mode

Transmitter Mode

3.5mm Audio Input
Optical Input

Charging Input

Connect one end of the included 3.5mm audio cable or Toslink optical cable to
the 3.5mm audio output or optical output of BR-O8. Connect the other end to
your wired audio equipment (wired headphones, speaker, or stereo system). You
can also plug your audio equipment cable directly into BR-O8 instead
Connect the BR-O8 to a power source with the micro-USB cable
Slide the RX/TX switch to “RX” position and slide the Power/Mode switch to “BT”
position
Tap and hold for 3 seconds, and the BR-O8 will enter pairing mode with the
square connection status indicator flashing white rapidly
Activate the pairing function of your wireless-compatible audio device (like a
smartphone) and select “AUKEY BR-O8”
Once paired, there will be a solid white “A” indicator on the display
If you want to pair with a second wireless-compatible audio device for dual
device connection, repeat steps 4 & 5 with that device
Once paired, there will be solid white “A” and “B” indicators on the display

1.

2.

3.

4.

5.

6.

7.

8.

- 04 -

Getting Started

Receiver Mode (RX Mode)

Connect one end of the included 3.5mm audio cable or Toslink optical cable to
the 3.5mm audio input or optical input of BR-O8. Connect the other end to your
audio source device (TV, computer, DVD player, CD player, or MP3 player) that
doesn’t have wireless function
Connect the BR-O8 to a power source with the micro-USB cable
Slide the RX/TX switch to “TX” position. Then slide the Power/Mode switch to “BT”
position
Tap and hold for 3 seconds, and the BR-O8 will enter pairing mode with the
square connection status indicator flashing green rapidly
Activate the pairing function of your wireless-compatible audio device (like
wireless headphones or speaker). Keep your device close to the BR-O8 and they
will pair automatically

1.

2.

3.

4.

5.

If your speaker or stereo system has left & right channel RCA inputs (colored white
and red respectively), you can use the included RCA cable to connect instead
When simultaneously connected with two devices, the BR-O8 can only accept
audio input from one device at a time

●

●

- 05 -

Notes for Receiver Mode

Transmitter Mode (TX Mode)

Once paired, there will be a solid white “A” indicator on the display
If you want to pair with a second wireless-compatible audio device for dual
device connection, repeat steps 4 & 5 with that device
Once paired, there will be solid white “A” and “B” indicators on the display

6.

7.

8.

If your TV, DVD player, or CD player has left & right channel RCA outputs (colored white
and red respectively), you can use the included RCA cable to connect instead

●

When you turn on the BR-O8, it will automatically reconnect to the last-paired
device
The BR-O8 will exit pairing mode after 1 minute
To clear the pairing list, tap and hold for 8 seconds in RX or TX Mode
The maximum wireless operating range is 50m (164ft). If you exceed this range,
the BR-O8 will disconnect from your paired device. The connection will be
re-established once you re-enter the wireless range within 5 minutes

●

●

●

●

- 06 -

Note for Transmitter Mode

Notes for Receiver & Transmitter Modes

Connect an audio source device (TV, computer, DVD player, CD player, or MP3
player) to the BR-O8 3.5mm audio input or optical input with the included 3.5mm
audio cable or optical cable
Connect your wired audio equipment (wired headphones, speaker, or stereo
system) to BR-O8 3.5mm audio output or optical output with a 3.5mm audio cable
or optical cable
Connect the BR-O8 to a power source with the micro-USB cable
Slide the Power/Mode switch to “BYPASS” position
Tap to select the audio input mode “AUX” or “OPT”
Once connected, you can enjoy boosted sound from your wired audio equipment

1.

2.

3.

4.

5.

6.

Only one of each cable type is included, so you will need to use two different
cable types to connect your two devices to BR-O8 (or supply a second cable if
you want to use two the same). If your connected audio equipment has left &
right channel RCA outputs (colored white and red respectively), you can also use
the included RCA cable to connect

●

- 07 -

Bypass Mode

Note

- 08-

Status Indicators

Indicator

RX

TX

OPT

AUX

A

B

Status

Receiver mode

Transmitter mode

Optical audio input mode

3.5mm audio input mode
Device A connected

Device B connected

SBC

APTX

LL

Connected Bluetooth device supports

aptX Low Latency audio codec

Connected Bluetooth device supports

aptX audio codec

Connected Bluetooth device supports

SBC audio codec

Use your device to adjust volume●

- 09 -

Bluetooth Audio Codecs (for Receiver and Transmitter Modes)

Bluetooth audio codecs encode digital audio data for transmission over Bluetooth
connection and decode it at the other end. SBC is a standard codec for Bluetooth
audio streaming. aptX offers lower latency (less audio delay when watching videos or
playing games) and improved audio quality. aptX Low Latency has the best
performance of the three with much lower latency. BR-O8 supports all three codecs, so
the codec used will be the best one your connected Bluetooth device supports.

Controls Summary

Button

Tap and hold for 3 seconds to enter pairing mode
Tap to play or pause (receiver mode only)
Tap to switch between 3.5mm and optical audio input modes

Note

Operation

Keep away from liquids and extreme heat
Don’t use headphones or speakers at high volume for extended periods, as this
may cause permanent hearing damage or loss

●

●

- 10 -

Connections Status Indicators

Green flashing slowly
Green flashing rapidly
Green
White flashing slowly
White flashing rapidly
White

Mode Status

Not connected (standby)
Pairing
Connected
Not connected (standby)
Pairing
Connected

Transmitter mode

Receiver mode

Product Care & Use

Indicator

- 11 -

Warranty & Customer Support

For questions, support, or warranty claims, contact us at the address below that
corresponds with your region. Please include your Amazon order number and
product model number.

Amazon US orders: [e-mail]
Amazon EU orders: [e-mail]
Amazon CA orders: [e-mail]

*Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY.
If you have purchased from a different seller, please contact them directly for service or warranty
issues.

Notice for the US

Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that
may cause undesired operation.

1.

2.

- 12 -

NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

●

●

●

●

- 13 -

This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.

- 14 -

Vielen Dank, dass Sie sich für den BR-O8 2-in-1kabelloserTransmitter und Receiver

von AUKEY entschieden haben. Bitte lesen Sie diese Bedienungsanleitung
aufmerksam durch und bewahren Sie sie für zukünftige Referenz gut auf. Sollten
Sie darüber hinaus Fragen oder Probleme haben, hilft Ihnen unser freundlicher
Kundenservice gerne weiter. Halten Sie Ihre Produktmodell -Nummer und
Amazon-Bestellnummer bereit.

Lieferumfang

2-in-1kabelloserTransmitter und Receiver

Micro-USB-Kabel
3,5-mm-Audiokabel
3,5-mm- zu RCA-Audiokabel
optisches TOSLINK-Kabel
Bedienungsanleitung
Garantiekarte

Modell

Technologie

Frequenzbereich

Eingang

Reichweite

Abmessungen

Gewicht

BR-O8

BT 5.0, aptX, aptX-LL

2.402GHz – 2.480GHz

DC 5V

50m

113 x 110 x 73mm

300g

- 15 -

Technische Daten

- 16 -

Product Diagram

Bypass-Modus

Receiver-Modus

3,5-mm-Audioausgang

Optischer Ausgang

Auschalten

BT-Modus

Transmitter-Modus

3,5-mm-Audioeingang

Optischer Eingang

Ladeeingang

Verbinden Sie das eine Ende des mitgelieferten 3,5-mm-Audiokabels oder des
optischen TOSLINK-Kabels mit dem 3,5-mm-Audioausgang oder dem optischen
Ausgang des BR-O8. Verbinden Sie das andere Ende mit Ihrem kabelgebundenen
Audiogerät (Kopfhörer, Lautsprecher oder Stereoanlage). Sie können Ihr Audiogerät
alternativ auch direkt per Kabel mit dem BR-O8 verbinden
Verbinden Sie den BR-O8 über das Micro-USB-Kabel mit einer Stromquelle
Schieben Sie den RX/TX-Schalter in die „RX“-Stellung und schieben Sie den
Power/Modus-Schalter in die „BT“-Stellung
Drücken und halten Sie 3 Sekunden lang, damit der Pairing-Modus des BR-O8
aktiviert wird – die viereckige Verbindungsstatusanzeige blinkt schnell weiß
Aktivieren Sie die Pairing-Funktion an Ihrem kabellos-kompatiblen Audiogerät (z.
B. einem Smartphone) und wählen Sie „AUKEY BR-O8“
Nach dem Pairing leuchtet auf dem Display ein weißes „A“
Wenn Sie ein zweites kabellos-kompatibles Audiogerät für eine zweite Verbindung
koppeln wollen, wiederholen Sie die Schritte 4 & 5 mit diesem Gerät
Nach dem Pairing leuchten auf dem Display ein weißes „A“ und „B“

1.

2.

3.

4.

5.

6.

7.

8.

- 17 -

Erste Schritte

Receiver-Modus (RX-Modus)

Verbinden Sie das eine Ende des mitgelieferten 3,5-mm-Audiokabels oder des
optischen TOSLINK-Kabels mit dem 3,5-mm-Audioeingang oder dem optischen
Eingang des BR-O8. Verbinden Sie das andere Ende mit Ihrem Audioquellgerät
(Fernseher, Computer, DVD-Player, CD-Player oder MP3-Player), das über keine
kabellose Funktion verfügt
Verbinden Sie den BR-O8 über das Micro-USB-Kabel mit einer Stromquelle
Schieben Sie den RX/TX-Schalter in die „TX“-Stellung. Dann schieben Sie den
Power/Modus-Schalter in die „BT“-Stellung
Drücken und halten Sie 3 Sekunden lang, damit der Pairing-Modus des BR-O8
aktiviert wird – die viereckige Verbindungsstatusanzeige blinkt schnell grün

1.

2.

3.

4.

Falls Ihr Lautsprecher oder Ihre Stereoanlage über einen linken und einen rechten
RCA-Eingang verfügt (weiß bzw. rot), können Sie stattdessen über das mitgelieferte
RCA-Kabel eine Verbindung herstellen
Wenn zwei Geräte gleichzeitig verbunden sind, kann der BR-O8 nur das Audiosignal
von einem Gerät empfangen

●

●

- 18 -

Hinweise für den Receiver-Modus

Transmitter-Modus (TX-Modus)