Audix FireBall SPECIFICATIONS

DYNAMIC INSTRUMENT MICROPHONE

FIREBALL

Dynamic Instrument

FireBall

OVERVIEW:

Designed, machined, assembled and tested by Audix in the USA, the
FireBall™ is a professional dynamic instrument microphone intended
for harmonica (both diatonic and chromatic) and beatbox. Clear,
accurate and capable of handling sound pressure levels in excess of
140 dB without distortion, the FireBall™ is ideally suited for both live
stage and studio recording applications.

The FireBall™ is characterized with a cardioid pickup pattern for
isolation and feedback control and is equipped with a VLM™ (Very
Low Mass) diaphragm for natural sound reproduction with exceptional
transient response.

With a smooth, uniform frequency response of 50 Hz - 16 kHz, the
FireBall™ is lightweight, compact, and comfortable to hold. The
Fireball™ includes a precision machined aluminum body, steel mesh

grill, unique three stage marbled anodized nish, laser etched model

and serial number, Switchcraft® or Audix XLR connector and heavy
duty nylon clip.

The FireBall™ is a low impedance microphone; when using the

FireBall™ with a guitar amplier, a high quality low-high impedance

transformer (such as T50K) is required.

SUPPLIED ACCESSORIES:

Heavy duty press fit mic clip (DCLIP)
Carrying pouch (P1)

OPTIONAL ACCESSORIES:

WS357 - External foam windscreen
DVICE - Spring loaded rim mount clamp
DCLAMP - Tension rod mic clamp
CBL 20 - 20’ XLR-XLR Low noise microphone cable
CBL DR25 - 25’ right angle XLR-XLR low noise microphone cable
CBL BP360 - 4’ adapter cable for RAD360 Wireless Bodypack
T50K- High quality low-high impedance transformer

™

FEATURES:

Fits comfortably in the palm of the hand
Handles “cupping” without impacting sound quality
Full size dynamic capsule
Clear and accurate sound reproduction
High SPL handling without distortion
Exceptional gain before feedback
Provides excellent isolation from other instruments
on stage
Precision machined aluminum body
5 year warranty

APPLICATIONS:

Live stage, studio
Harmonica
Vocals
Beatbox
Percussion
Saxophone, trumpet, trombone
Flute
Accordian

FIREBALL W/ CBL-BP360 DCLAMP WS357 CBL 20 T50K

SPECIFICATIONS:

FIREBALL™

Transducer Type Dynamic Moving Coil
Frequency Response 50 Hz - 16 kHz
Polar Pattern Cardioid
Output Impedance 150 ohms
Sensitivity 1.5 mV / Pa @ 1k
Capsule Technology VLM Type B
Off Axis Rejection > 23 dB

Maximum SPL ≥140 dB

Power Requirements None
Connector Switchcraft® or Audix male
XLR connector
Polarity Positive pressure on diaphragm
produces positive voltage on pin 2
relative to pin 3 of output
XLR connector
Housing / Finish Machined Aluminum /
Anodized

Weight 128 g / 4.5 ounces

Length 77.5 mm / 3.05 inches

FREQUENCY / POLARS:

ARCHITECTS AND ENGINEERS SPECIFICATIONS:

The microphone shall be of the dynamic type operating on the moving coil principle and the polar
pattern of the microphone shall be cardioid. The capsule shall be VLM Type B. The nominal
output impedance shall be equal to 150 ohms at 1 kHz. The microphone shall have a sensitivity of

1.5 mV / Pa at 1 kHz and a sound pressure level ≥140 dB. The microphone body shall machined
of aluminum and the grill be of steel mesh. The overall dimensions shall be 21.5 mm in diameter
at the base, 53.5 mm at the widest point on the grill and 77.5 mm in length. The microphone shall
be the Audix FireBall™.

OPERATION:

The Fireball™ is a low impedance microphone and should be plugged into a “mic level” input
on your console, mixer, or recording device. Please note that your microphone does not require
phantom power and will not be effected in any way by phantom power should it be running
simultaneously while the microphone is in operation. Avoid plugging or unplugging the
microphone from the PA system unless the channel is muted or the volume of the system turned
down. Failure to do so may result in a loud “popping” noise which could seriously damage the
speakers in the PA system.

USER TIPS:

The FireBall™ has a tight (cardioid) pick-up pattern in order to help eliminate sound from other
instruments on stage from “bleeding” into the microphone.
The FireBall™ is a low impedance microphone, however, it may be plugged directly into a guitar
amp by using the Audix T50k impedance converter. This will allow for the proper gain structure
and will insure the best possible sound quality.
The FireBall™ may also be used for a wide variety of instrument and vocal applications. Working
distance can be anywhere between 1-6 inches depending on the instruments on stage, the
volume of the music, and the type of stage monitors.
Allow a distance of 2-3 feet between microphones to avoid phase cancellation issues.
*Further miking techniques may be found on our website at www.audixusa.com

***All specications subject to change without notice.

SERVICE AND WARRANTY:

This microphone is under warranty for a period of 5 years from
any and all manufacturing defects. Should your microphone
fail in any way, please contact the Audix Service department
at 503-682-6933. A Return Authorization number is required
before returning any products.

CARE AND MAINTENANCE:

The FIREBALL is manufactured to exacting specs with roadworthy
construction. However, the capsule is highly sensitive and should be handled
with care. Avoid extreme temperatures and be sure to store your microphone
in the pouch provided when not in use. Moisture of any kind can adversely
affect the sound and performance of your microphone.

AUDIX WARRANTY REGISTRATION FORM

Name:________________________________ Model:___________________
Company:_____________________________ Serial Number:_____________
Address:______________________________ Store:____________________
City:_________________________________ Store Location:_____________
Prov./State:___________ Zip:_____________ Purchase Date:_____________
Phone: ( )___________________________ Signature:_________________
Email:________________________________ Date:____________________

Please register your product online at www.audixusa.com or mail this form to:

Audix Microphones P.O. Box 4010 Wilsonville, OR 97070

DIMENSIONS (mm):

www.audixusa.com

Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070

Please Check all that apply:
Male Female

Age: Occupation: Primary Instruments: Product to be used for:
18 or Under Musician Vocal Pro live sound
19-25 Producer Guitar / Bass Pro recording
26-35 Sound Eng. Drums Home recording
36-45 Radio/TV Keyboard Rehearsal
46-55 Production Brass Installation
55 + Other _______ Woodwinds School
Strings House of Worship
How did you hear about Audix? Other ___________ Other ___________
Magazine Ad Online Ad
On-line Store Friend Do you own other Audix Products? Yes No
Salesman Other __________ Model(s) ________________________________
Have you visited the Audix website? Yes No

503-682-6933 Fax: [phone]

1.1