A10
STUDIO-QUALITY EARPHONES
OVERVIEW
The A10 Earphones are engineered to deliver studio-quality performance
for live sound monitoring and critical listening with exceptional imaging and
isolation. The A10 features a dynamic low-mass moving coil assembly and
titanium alloy diaphragm delivering ten octaves of frequency response with
accurate phase coherence. The balanced sound signature of the A10 allows for
hours of listening without fatigue.
FEATURES
• 10 mm dynamic driver with titanium alloy diaphragm for high output and
low distortion
• Linear bass, clear and articulate midrange, and smooth highs
• Optimized silicone ear tips (S, M, L) for strong seal and isolation
• Gold-plated MMCX connectors allow for 360-degree rotation for ideal
positioning
• Reinforced wire wrap near the connector holds the earphone confidently
in place
• Premium silver-plated oxygen-free copper cable in a durable soft-coat
jacket with gold-plated 3.5 mm (1/8 in) plug
SUPPLIED ACCESSORIES
• Protective carrying case
• Detachable 1.5 m cable
• Small, medium and large pairs
of silicone ear tips
SPECIFICATIONS
Operating Principle Dynamic – moving coil
Sensitivity (@ 1 kHz) 105 dB SPL/mW
Frequency Response 18 Hz – 19 kHz
Impedance 35 Ohms
Noise Isolation* 25 dB @ 1 kHz
*See noise isolation polar pattern
Driver Size 10 mm
Diaphragm Titanium Alloy
Magnet Neodymium
Shell Crystal Polycarbonate,
tuned and vented
Connectors MMCX, 3.5 mm (1/8 in)
Cable 1.5 m detachable MMCX,
braided, oxygen-free
copper, 40 µin silver-plated
NOISE ISOLATION POLAR PATTERN
Noise isolation is the measure of sound attenuation levels achieved with A10
earphones that have been properly fitted in the ear canals with the supplied
silicone ear tips. The noise isolation polar pattern illustrates how attenuation
of the A10 earphones varies as a function of both frequency and direction
of the sound source. In general, lower frequencies are less attenuated than
higher frequencies and sound sources coming the side of the head are less
attenuated than from the front or back. Audix earphones do not carry a Noise
Reduction Rating and are not meant to be used as a hearing protection device.
© 2021 Audix Corporation. Audix is a registered trademark of the Audix corporation.
Specifications subject to change without notice.
For service and warranty information, visit audixusa.com
0 dB
-10
-20
-30
-40
-40
-30
-20
-10
0 dB
125
250
500
1 K
2 K
4 K
8 K
16 K
A10 Spec Sheet v1.1
Loading...