Audiovox VM9510TS User Manual

VM9510TS

Operation Manual

Manual del Usuario/Guide d'Utilisateur

CONTENTS

Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9510TS Mobile Multimedia AM/FM/DVD Receiver for maximum enjoyment.

Preparation ............................................................................................. 1

Features........................................................................................................................ 1

Tools and Supplies........................................................................................................ 1

Disconnecting the Battery ............................................................................................. 1

Installation .............................................................................................. 2

Pre-installation .............................................................................................................. 2

Wiring............................................................................................................................ 2

Final Installation ............................................................................................................ 2

Final ISO-DIN Installation.............................................................................................. 2

Using the iAUX3 External AV Connector ...................................................................... 2

Controls and Indicators......................................................................... 4

Button Operation........................................................................................................... 4

Front Zone Remote Control .................................................................. 7

Multi-ZONE Remote Control.................................................................. 9

Using the TFT Monitor......................................................................... 10

Open/Close TFT Monitor............................................................................................. 10

TFT Monitor Auto Open .............................................................................................. 10

Monitor Tilt Angle Adjustment ..................................................................................... 10

Rear Camera Mode..................................................................................................... 10

Aspect Ratio................................................................................................................ 10

Image Setting.............................................................................................................. 10

Parking Brake Inhibit................................................................................................... 10

Monitor Movement Mechanism................................................................................... 10

Operating Instructions ........................................................................ 11

Power On / Off ............................................................................................................ 11

Audible Beep Confirmation ......................................................................................... 11

Mute ............................................................................................................................ 11

Playing Source Selection ............................................................................................ 11

Volume Adjustment..................................................................................................... 11

Audio Control Menu .................................................................................................... 11

Six-Channel Audio Control.......................................................................................... 11

Rear Zone ................................................................................................................... 11

System Reset.............................................................................................................. 11

Line Mute .................................................................................................................... 11

System Setup Menu............................................................................. 12

General Setup Menu................................................................................................... 12

ASP (Audio Sound Processing) Config Menu............................................................. 12

Exiting the System Setup Menu.................................................................................. 13

Tuner Operation ................................................................................... 14

Tuner TFT Display ...................................................................................................... 14

Switch to Radio Tuner source ..................................................................................... 14

Select FM/AM Band .................................................................................................... 14

Auto Tuning................................................................................................................. 14

Manual Tuning ............................................................................................................ 14

Using Preset Stations.................................................................................................. 14

Auto Store (AS)........................................................................................................... 14

Local Radio Station Seeking (LOC) ........................................................................... 14

DVD Player Operation ......................................................................... 15

Opening/Closing the TFT Video Screen .................................................................... 15

Insert/Eject Disc ......................................................................................................... 15

Ejecting a Disc ........................................................................................................... 15

Reset the Loading Mechanism................................................................................... 15

Accessing DVD Mode ................................................................................................ 15

Using the Touch-Screen Controls .............................................................................. 15

Controlling Playback .................................................................................................. 15

Accessing the DVD Menu .......................................................................................... 15

Moving Through Chapters.......................................................................................... 15

Fast Forward/Fast Reverse........................................................................................ 16

Scanning .................................................................................................................... 16

Selecting 2-Channel and 6-Channel Audio Playback ................................................ 16

Goto Search ............................................................................................................... 16

Direct Chapter / Track Selection ................................................................................ 16

Viewing an Alternate Picture Angle (DVD Only) ........................................................ 16

Zooming ..................................................................................................................... 16

Multi-Language Discs (DVD Only) ............................................................................. 16

PBC (Play back Control) (VCD Only)......................................................................... 16

Playback Information.................................................................................................. 16

General Disc Information ........................................................................................... 17

DVD Setup Menu.................................................................................. 18

Accessing the DVD Setup Screen ............................................................................. 18

LANGUAGE Menu ..................................................................................................... 18

VIDEO Menu .............................................................................................................. 18

AUDIO Menu.............................................................................................................. 19

SURR SETUP Menu .................................................................................................. 19

SURROUND FX......................................................................................................... 19

RATING (Parental Lock) Menu .................................................................................. 20

CD/MP3/WMA Operation ..................................................................... 21

CD Player User Interface ........................................................................................... 21

MP3/WMA Discs ........................................................................................................ 21

SD Card Reader Operation ................................................................. 22

Accessing SD Card Mode .......................................................................................... 22

Using the Touch-Screen Controls .............................................................................. 22

Controlling Playback .................................................................................................. 22

Moving Through Chapters.......................................................................................... 22

Change Directory ....................................................................................................... 22

Previous/Next Page ................................................................................................... 22

Direct Chapter / Track Selection ................................................................................ 22

TV Tuner Operation ............................................................................. 23

Accessing TV Mode ................................................................................................... 23

Auto Tuning................................................................................................................ 23

Manual Tuning ........................................................................................................... 23

Storing Stations (AS).................................................................................................. 23

Direct Channel Selection............................................................................................ 23

Display Current Channel ............................................................................................ 23

Troubleshooting .................................................................................. 24

Specifications ...................................................................................... 26

Contenido

Gracias por elegir los productos Jensen. Esperamos que encuentre en este manual instrucciones claras y fáciles de seguir. Si se toma unos pocos minutos para leerlo, aprenderá cómo utilizar todas las funciones de su nuevo radio Jensen para su máximo entretenimiento.

Prreparación......................................................................................... 27

Features...................................................................................................................... 27

Herramientas y Provisiones ........................................................................................ 27

Desconexión de la Batería.......................................................................................... 27

Instalación ............................................................................................ 28

Preinstalación.............................................................................................................. 28

Cableado..................................................................................................................... 28

Instalación Final .......................................................................................................... 28

Instalación del ISO-DIN Final...................................................................................... 28

Utilizando el Conector AV Externo iAUX3................................................................... 28

Controles e Indicatores ....................................................................... 30

Control Remoto de Zona Delantera.................................................... 33

Control Remoto de Zona Múltiple....................................................... 35

Utilización del Monitor TFT ................................................................. 36

Abrir/Cerrar el Monitor TFT......................................................................................... 36

Abrir Automáticamente el Monitor TFT ....................................................................... 36

Ajuste de Ángulo de Inclinación del Monitor ............................................................... 36

Modo de Cámara Trasera........................................................................................... 36

Proporción de la Imagen............................................................................................. 36

Configuración de la Imagen ........................................................................................ 36

Bloqueo de Freno de Estacionamiento....................................................................... 36

Mecanismo de Movimiento de Monitor ....................................................................... 36

Instrucciones de Operación................................................................ 37

Encendido / Apagado.................................................................................................. 37

Confirmación Bip Audible............................................................................................ 37

Mute ............................................................................................................................ 37

Selección de Fuente de Reproducción ....................................................................... 37

Ajuste de Volumen...................................................................................................... 37

Menú de Control de Audio .......................................................................................... 37

Control de Audio de Seis Canales .............................................................................. 37

Reinicio del Sistema.................................................................................................... 37

Enmudecedor de Línea............................................................................................... 37

Menú de Configuración de Sistema ................................................... 38

Menú de Configuración General ................................................................................. 38

Menú de configuración de ASP (Procesamiento de Sonido de Audio)....................... 38

Saliendo del Menú de Configuración de Sistema ....................................................... 39

Operación del Sintonizador ................................................................ 40

Pantalla del Sintonizador de TFT................................................................................ 40

Cambio a fuente de Sintonizador de Radio ................................................................ 40

Selección de banda FM/AM........................................................................................ 40

Sintonizador Automático ............................................................................................. 40

Sintonía Manual .......................................................................................................... 40

Utilizando Estaciones Preconfiguradas....................................................................... 40

Almacenamiento Automático (AS) .............................................................................. 40

Buscador de Estaciones de Radio Local (LOC).......................................................... 40

Operación del DVD .............................................................................. 41

Abriendo / Cerrando la Pantalla de Video TFT ........................................................... 41

Insertar/Expulsar Disco .............................................................................................. 41

Eyectar un Disco ........................................................................................................ 41

Reinicie el Mecanismo de Carga ............................................................................... 41

Accediendo al Modo DVD .......................................................................................... 41

Usando los Controles Táctiles de Pantalla ................................................................ 41

Controlando la Ejecución ........................................................................................... 41

Accediendo al Menú DVD .......................................................................................... 41

Moviéndose a Través de Capítulos............................................................................ 42

Avance Rápido/Retroceso Rápido ............................................................................. 42

Escaneo ..................................................................................................................... 42

Seleccionando la Reproducción de Audio en 2 Canales y 6 Canales ....................... 42

Ir a Búsqueda (goto) .................................................................................................. 42

Capítulo Directo / Selección de Pista......................................................................... 42

Viendo un Ángulo de Imagen Alterno (DVD Solamente) ........................................... 42

Acercándose .............................................................................................................. 42

Discos con Lenguaje Múltiple (DVD Solamente) ....................................................... 42

PBC (Control de Reproducción) (VCD Solamente) ................................................... 43

Información de Reproducción .................................................................................... 43

Información de Disco General.................................................................................... 43

Menú de Configuración del DVD ........................................................ 44

Accediendo a la Pantalla de Configuración de DVD.................................................. 44

Menú LANGUAGE (Lenguaje) ................................................................................... 44

Menú VIDEO .............................................................................................................. 45

Menú de AUDIO......................................................................................................... 45

Menú de Configuración SURROUND ........................................................................ 45

Menú RATING (Bloqueo de Padres).......................................................................... 46

Operación del Reproductor de CD/MP3/WMA .................................. 47

CD Player User Interface ........................................................................................... 47

Operación MP3/WMA ................................................................................................ 47

Operación del Lector de Tarjeta SD................................................... 48

Accediendo al Modo de Tarjeta SD ........................................................................... 48

Usando los Controles Táctiles de Pantalla (Touch Screen)....................................... 48

Controlando la Ejecución ........................................................................................... 48

Moviéndose a Través de Capítulos............................................................................ 48

Cambio de Directorio ................................................................................................. 48

Página Previa / Siguiente........................................................................................... 48

Capítulo Directo / Selección de Pista......................................................................... 48

Operación del Sintonizador de TV ..................................................... 49

Accediendo al Modo TV ............................................................................................. 49

Sintonizador Automático ............................................................................................ 49

Sintonía Manual ......................................................................................................... 49

Almacenando Estaciones (AS) .................................................................................. 49

Selección Directa de Canal........................................................................................ 49

Mostrar el Canal Actual.............................................................................................. 49

Solución de Problemas....................................................................... 50

Especificaciones.................................................................................. 52

iii

Table des matières

Merci d'avoir choisi un produit Jensen . Nous espérons que vous allez trouver les instructions dans ce guide de propriétaire claires et faciles à suivre . Prenez quelques minutes à le consulter, vous apprendrez à utiliser toutes les fonctions de votre nouvelle radio Jensen pour en tirer une jouissance maximum.

Preparation ........................................................................................... 53

Features...................................................................................................................... 53

Outils et fournitures ..................................................................................................... 53

Débranchez la pile ...................................................................................................... 53

Installation ............................................................................................ 54

Pré-installation ............................................................................................................ 54

Câblage....................................................................................................................... 54

Installation finale ......................................................................................................... 54

Final ISO-DIN Installation............................................................................................ 54

Utilisation du connecteur AV externe iAUX3............................................................... 54

Controles et indicateurs...................................................................... 56

Telecomande de la zone d'avant ........................................................ 59

Telecommande Multi-ZONE ................................................................ 61

Utilisation du moniteur TFT ................................................................ 62

Ouvrir Moniteur TFT.................................................................................................... 62

Ouverture automatique du moniteur TFT.................................................................... 62

Ajustement de l'angle d'inclination du moniteur .......................................................... 62

Mode caméra à l'arrière .............................................................................................. 62

Rapport largeur/longueur ............................................................................................ 62

églage de l'image ........................................................................................................ 62

Inhibition des freins de garage.................................................................................... 62

Mécanisme du mouvement de moniteur..................................................................... 62

Consignes d'utilisation........................................................................ 63

Confirmation du bip audible ........................................................................................ 63

Muet ............................................................................................................................ 63

Sélection de la source de reproduction....................................................................... 63

Ajustement du volume................................................................................................. 63

Menu de Contrôle Audio ............................................................................................. 63

Contrôle audio à six chaînes....................................................................................... 63

Zone d'arrière.............................................................................................................. 63

Réinitialisation du système.......................................................................................... 63

Ligne Muet .................................................................................................................. 63

Menu configuration du systeme......................................................... 64

Menu Configuration Générale ..................................................................................... 64

Menu ASP (traitement de son audio) Config............................................................... 64

Operation tuner .................................................................................... 66

Affichage TFT Tuner ................................................................................................... 66

Changer à la source Tuner Radio............................................................................... 66

Sélectionnez bande AM/FM........................................................................................ 66

Syntonisation automatique.......................................................................................... 66

Syntonisation à la main............................................................................................... 66

Utilisation des stations pré-réglées ............................................................................. 66

Stockage automatique (AS) ........................................................................................ 66

Recherche de stations de radio locale........................................................................ 66

Operation platine DVD......................................................................... 67

Ouvrir/Fermer l'écrant vidéo TFT ................................................................................ 67

Insérer/Ejecter un Disque........................................................................................... 67

Ejection du disque...................................................................................................... 67

Réinitialiser le mécanisme de chargement ................................................................ 67

Accéder à la mode DVD............................................................................................. 67

Utilisation des contrôles d'écran tactile ...................................................................... 67

Contrôler la reproduction............................................................................................ 67

Accéder au menu DVD .............................................................................................. 67

Se déplacer à travers les chapitres............................................................................ 68

Avance rapide/Recul rapide ....................................................................................... 68

Balayage .................................................................................................................... 68

Sélectionner la reproduction audio à 2 chaînes et à 6 chaînes ................................. 68

Recherche Aller à....................................................................................................... 68

Chapitre Direct/Sélection de Piste ............................................................................. 68

Visionner un angle de l'image alternatif (DVD uniquement)....................................... 68

Zoom .......................................................................................................................... 68

Disques multi-langues (DVD uniquement) ................................................................. 68

PBC (contrôle de la reproduction) (VCD uniquement) ............................................... 69

Information de reproduction ....................................................................................... 69

Information générale du disque.................................................................................. 69

Menu de configuration DVD................................................................ 70

Accéder à l'écran de configuration du DVD ............................................................... 70

Menu LANGUE .......................................................................................................... 70

Menu Vidéo ................................................................................................................ 70

Menu Audio ................................................................................................................ 71

SURR SETUP (Menu de configuration quadriphonique) ........................................... 71

SURROUND FX......................................................................................................... 72

Menu Classement (verrouille parentale) .................................................................... 72

Operation platine CD/MP3/WMA......................................................... 73

Utilisation des contrôles d'écran CD .......................................................................... 73

Opération MP3/WMA ................................................................................................. 73

Operation lecteur carte SD ................................................................. 74

Accéder à la mode carte SD ...................................................................................... 74

Utilisation des contrôles d'écran tactile ...................................................................... 74

Contrôler la reproduction............................................................................................ 74

Se déplacer à travers les chapitres............................................................................ 74

Changement de répertoire ......................................................................................... 74

Page précédente/prochaine ....................................................................................... 74

Sélection directe du chapitre/piste ............................................................................. 74

Operation tuner tele............................................................................. 75

Accéder à la mode télé .............................................................................................. 75

Syntonisation automatique......................................................................................... 75

Syntonisation à la main .............................................................................................. 75

Stockage des stations (AS)........................................................................................ 75

Sélection de chaîne directe........................................................................................ 75

Afficher la chaîne courante ........................................................................................ 75

Depannage ........................................................................................... 76

Specifications ...................................................................................... 78

VM9510TS

PREPARATION

Congratulations on your purchase of the Jensen VM9510TS Mobile Multimedia AM/FM/DVD Receiver.

It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9510TS installed by a reputable installation shop.

Features

• Single DIN Size

• Ultra slim slot-in DVD core mechanism

• 7 inch Panasonic TFT monitor

• Wide screen TFT display and segment LCD display

• Rotary volume control

• ISO Double-DIN chassis

• Light weight proprietary DVD core mechanism

• Wide screen (16:9) 6.5" TFT touch screen monitor

• Main System 18 Watts x 4 RMS / 60 Watts x 4 Peak

• 240 watts total system power

• Multi-Zone media distribution

• AM / FM Tuner

• TV Tuner with antenna

• Supports NTSC and PAL, auto negotiation

• Full, Wide, Normal and Off (Standby) screen modes

• Motorized TFT panel has 16 precise angle adjustments via remote control or infinitely variable manual adjustment from the front panel

• Auto-activated rear view camera input - Reverse gear over rides the TFT screen to display video from a rear mounted camera

• Over current motor protection for obstructed TFT panel

• Compatible optical / SD Card formats: DVD-R/RW, DVD+R/RW, CD-R/RW, CD-DA, MP3, WMA, HDCD, SVCD, VCD, MPEG (MPEG 1), MPEG 4, JPEG, MP3/ WMA files burned onto a DVD+R/RW or DVD-R/RW and Kodak Picture CD

• SD Card slot

• Multi-language, multi-subtitle and multi-angle playback options

• Last position memory for optical disc.

• Parental Lock - Uses a password and disc rating set-up to prevent unauthorized user access from display content

• Audio Mute

• 5-Way joystick navigation

• Two remote controls - a full function front remote control and a limited function Kid-Zone remote control for back seat operation

• Over and under voltage protection to insure the unit operates within designed parameters

• Damped DVD mechanism with 16Mbit flash memory ESP (Electronic Shock Protection) provide smooth disc playback under the severest road conditions

Tools and Supplies

You will need these tools and supplies to install your VM9510TS:

• Torx type, flat-head and Philips screwdrivers

• Wire cutters and strippers

• Tools to remove existing radio (screwdriver, socket wrench set or other tools)

• Electrical tape

• Crimping tool

• Volt meter/test light

• Crimp connections

• 18 gauge wire for power connections

• 16 – 18 gauge speaker wire

WARNING! Only connect the unit to a12-volt power supply with proper grounding.

WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions.

WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law.

WARNING! Never disassemble or adjust the unit without the assistance of a professional. For details, please consult your local car stereo specialty shop.

WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water.

WARNING! Never use irregular discs.

WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor.

WARNING! Do not change the fuse on the power wire without professional guidance. Using an improper fuse may cause damage to the unit and result in a fire.

WARNING! The monitor employs an automatic motorized mechanism. To prevent damage to the core mechanism, please do not push, pull or swivel the monitor manually.

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation.

NOTE: If the VM9510TS is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short circuit.

VM9510TS

7-INCH

TFT

7-INCH

TFT

7-INCH

TFT

INSTALLATION

Pre-installation

1. Press the metal levers on both sides to remove the halfsleeve from the radio.

2. Remove the transport screws.

PREPARE RADIO

7-INCH

IGITAL

7-INCH

T FT

BAND

AS/PS

VM9510

AM/FM/DVD/MP3

Push

MUTE

R ECEIVER

PWR

OPEN

DISP

AVAUXIN

Push

MODE

ENTER

3. Install the half-sleeve. a. Install adapter if necessary (optional). b. Install half-sleeve into adapter or dashboard (only

use the supplied screws). Do not force the sleeve into the opening or cause it to bend or bow.

c. Locate the series of bend tabs along the top,

bottom and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

d. Install support strap to make the unit more stable.

INSTALL HALF SLEEVE

CAUTION! Be careful not to damage the car wiring.

4. Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve.

Wiring

Complete wiring as illustrated in the wiring diagram on page

3. Once the wiring is complete, reconnect the battery

negative terminal. If there is no ACC available, connect the ACC lead to the power supply with a switch.

NOTE: When replacing a fuse, be sure to use correct type and amperage to avoid damaging the radio. The VM9510TS uses one 10 amp mini-ATM fuse, located in the black filter box in-line with the main wire harness.

Final Installation

After completing the wiring connections, turn the unit on to confirm operation (ignition switch must be on). If unit does not operate, recheck all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

1. Connect wiring adapter to existing wiring harness.

2. Connect antenna lead.

3. Carefully slide the radio into the half-sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

NOTE: For proper operation of the CD/DVD player, the chassis must be mounted within 20° of horizontal. Make sure the unit is mounted within this limitation.

4. Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION! The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

5. Replace any items you removed from the dashboard.

FINAL INSTALLATION

7-INCH

D IGITAL

7-INCH

BAND

T FT

AS/PS

VM9510

AM/FM/DVD/MP3

Push

R ECEIVER

MUTE

PWR

OPEN

DISP

AVAUXIN

Push

MODE

ENTER

Final ISO-DIN Installation

1. Remove trim ring.

2. Mount factory brackets on new radio using existing screws from old radio.

3. Slide radio chassis into dash opening and secure.

4. Reinstall dash panel.

FINAL ISO-DIN INSTALLATION

7-INCH

DIGITALT

7-INCHTFT

BAND

AS/PS

VM9510

AM/FM/DVD/MP3

Push

R ECEIVER

MUTE

PWR

OPEN

DISP

AVAU

X I

Push

MODE

ENTER

Using the iAUX3 External AV Connector

The iAUX3 allows you to connect a variety of external devices, including a VCR, DVD player, portable MP3 player, etc., to your VM9510TS without removing the radio.

To install the iAUX3, connect it to the AUX-IN cables on the back of the VM9510TS (see the Wiring Diagram” on page 3), and then install the iAUX3 in a location convenient for plugging in auxiliary devices.

VM9510TS

WIRING DIAGRAM

CONTROLS AND INDICATORS

Button Operation

1. OPEN

Press the OPEN button (1) to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT.

2. WIDE/ PICTURE

Press the WIDE/ PICTURE button (2) to adjust the display aspect of the picture to one of three settings: Wide, Full, Normal or OFF. Press and hold to access picture settings.

3. ( )

Press the button (3) to adjust the upward tilt angle of the screen one step at a time. Press and hold this button to continuously adjust the upward tilt or picture settings.

4. ( )

Press the button (4) to adjust the downward tilt angle of the screen one step at a time. Press and hold this button to continuously adjust the downward tilt or picture settings.

5. DISP

Press the DISP button (5) to display system information on the screen.

6. VOL/LO/DX

Rotate the VOL/LO/DX knob (6) to adjust the volume. Press and release to enter and/or confirm audio settings. Press and hold to activate the Local (LOC) setting.

7. POWER/MUTE

Press the POWER/MUTE button (7) once to turn the unit on. Press again to mute the volume. Press and hold to turn the unit off.

8. 1/AUDIO

DVD Mode: Press to select audio language during playback. TUNER Mode: Press once to play preset radio station

channel 1. Press and hold to store the current radio station in preset channel 1.

9. 2/SUBTITLE

DVD Mode: Press once to select the subtitle language during playback.

TUNER Mode: Press once to play preset radio station channel 2. Press and hold to store the current radio station in preset channel 2.

VM9510TS

CONTROLS AND INDICATORS

10. 3/SCN

DVD Mode: Press once to start scan playback. TUNER Mode: Press once to play preset radio station

channel 3. Press and hold to store the current radio station in preset channel 3.

11. 4/REP

DVD Mode: Press once to start repeat playback. TUNER Mode: Press once to play preset radio station

channel 4. Press and hold to store the current radio station in preset channel 4.

12. 5/2-6CH/RDM

DVD Mode: Press once for random playback. TUNER Mode: Press once to play preset radio station

channel 5. Press and hold to store the current radio station in preset channel 5.

CD Mode: Press and hold to switch between 2 channel & 6 channel audio output.

13. 6/STOP

DVD Mode: Press once to stop playback. TUNER Mode: Press once to play preset radio station

channel 6. Press and hold to store the current radio station in preset channel 6.

14. BAND

TUNER Mode: Press to switch between FM and AM.

15. SRC

Press once to select playing mode. Press and hold to toggle rear zone mode On/0ff.

16. ( )

DVD Mode: Press once to play back previous chapter/track. TUNER Mode: Press once to auto search for the previous

available radio station. MENU Mode: Press once to move the cursor to the left.

17. ( )

DVD Mode: Press once to enter the next chapter or track. TUNER Mode: Press once to auto-search the next available

radio station. MENU Mode: Press once to move the cursor to the right.

18. ( )

DVD Mode: Press once for fast forward/fast reverse. TUNER Mode: Press to go up one frequency step. MENU Mode: Press once to move the cursor up.

19. ( )

DVD Mode: Press once for slow forward/slow reverse. TUNER Mode: Press to go down one frequency step. MENU Mode: Press once to move the cursor down.

20. PLAY/ENTER

DVD Mode: Press once to start a playback. Press once to confirm a selection.

21. ( )

Press once for disc insertion/ejection. Press and hold to reset core mechanism position.

22. RESET

Press to reset system settings to factory default (except the password and parental lock setting).

23. LCD Display

24. TFT Display

25. IR Remote Control Receiver

26. AS (Auto Store)

Press to auto store strong radio stations in the six preset channels in the current band.

27. SD Card Slot

CONTROLS AND INDICATORS

LCD Display/Indicators

1. Disc Indicator

Illuminated when disc is loaded

2. DVD Playback Indicators (SCN/RPT/RDM/ALL)

The following DVD playback indicators become Illuminated when the corresponding function is active:

• SCN: scan playback

• RPT: repeat playback

• RDM: random playback

• ALL: playback all chapters

3. Loudness Indicator (LOUD)

The loudness indicator becomes illuminated when the LOUD function is activated.

4. Main Display

The main display is an 8 digit, 14 segment LCD which displays the time, tuning frequency and other text information.

5. Channel/Disc Display

The channel/disc display is a 2 digit, 7 segment LCD display which displays the disc number or radio channel indicators when the corresponding function is active:

• CH: radio is activated

• DISC: DVD mode is activated

6. Stereo/Local Indicator

The stereo/local indicator illuminates one of the following indicators when the corresponding function is active:

• ST: radio is in stereo mode

• LOC: local radio station seeking function is activated

VM9510TS

1 2 3 4 5 6

VM9510TS

FRONT ZONE REMOTE CONTROL

Table 1: Front Zone Remote Control Functions

Button Function

Name Ref # DVD VCD TUNER CD/MP3

MENU 1 Enters the main menu of the

TITLE 2 Enters the title menu of the

disc

MUTE 3 Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output

POWER/

AUDIO 5 Changes the audio language

REPT A-B 6 Setup to repeat playback

REPT 7 Repeats playback of current

4 Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off

for disc playback

from time frame A to time frame B

chapter

SRC 8 Selects playing mode Selects playing mode Selects playing mode Selects playing mode

SUBTITLE 9 Language selection for subti-

tle

DISP 10 Displays playing information Displays playing information Displays playing information Display playing information

ANGLE

ANGLE 13 Plays back disc in different

11 Continuously adjusts front

panel tilt angle

12 Continuously adjusts front

panel tilt angle

angle for a scene

14 Fast forwards the disc con-

tent

VOL - 15 Decreases volume Decreases volume Decreases volume Decreases volume

VOL + 16 Increases volume Increases volume Increases volume Increases volume

17 Selects the previous chapter

for playback

18 Pauses playback/starts play-

back

19 Selects the next chapter for

playback

BAND 20 Stops playback Stops playback Selects FM/AM band Stops playback

GOTO 21 Goes to specific time frame

and playback

22 Slow playback/slow rewind

playback

Turns on PBC when playing VCD

Plays first ten seconds of each chapter/title

Setup to repeat playback from time frame A to time frame B

Repeats playback of current chapter

Continuously adjusts front panel tilt angle

Plays back Picture CD with different angle of picture displayed

Fast forwards the disc content

Selects the previous chapter for playback

Pauses playback/starts playback

Selects the next chapter for playback

Goes to specific time frame and playback

Slow playback/slow rewind playback

Continuously adjusts front panel tilt angle

Fast forwards the disc content

Searches an available radio station by decreasing tuning frequency

Scans FM/AM radio station; plays/stores radio station; deletes radio station

Searches an available radio station by increasing tuning frequency

Repeats playback of current track

Continuously adjusts front panel tilt angle

Fast forwards the disc content

Selects the previous track for playback

Pauses playback/starts playback

Selects the next track for playback

NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is

for illustrative purposes only.

Table 1: Front Zone Remote Control Functions

Button Function

Name Ref # DVD VCD TUNER CD/MP3

ZOOM 23 Zooms in/out on an image Zooms in/out on an image

PIC 24 Displays set-up parameters Displays set-up parameters

OPEN/ CLOSE

WIDE 28 Selects display mode: WIDE,

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (Numeric Keypad)

DVD SETUP

SYS SETUP

SEL 32

RDM 33 Plays all chapters in random

SCN 34 Plays the first ten seconds of

EJECT 35 Ejects disc Ejects disc Ejects disc Ejects disc

25 Opens/Closes the TFT moni-

tor

26 Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle

27 Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle Increases monitor tilt angle

NORMAL, FULL or Off (Standby)

29 Directly accesses chapter 1-6 selects preset for current

30 Access DVD Setup menu Access DVD Setup menu Access DVD Setup menu Access DVD Setup menu

31 Access System Setup menu Access System Setup menu Access System Setup menu Access System Setup menu

order

Opens/Closes the TFT monitor

Selects display mode: WIDE, NORMAL, FULL or Off (Standby)

Opens/Closes the TFT monitor

Selects display mode: WIDE, NORMAL, FULL or Off (Standby)

band

Opens/Closes the TFT monitor

Selects display mode: WIDE, NORMAL, FULL or Off (Standby)

Directly accesses track

Plays all tracks in random order

each track

VM9510TS

MULTI-ZONE REMOTE CONTROL

Table 2: Multi-Zone Remote Control Functions

Button Function

Name Ref # DVD VCD

MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD

TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title

MUTE 3 Toggles on/off audio output Toggles on/off audio output

AUDIO 5 Switches the audio language for disc playback

REPT 7 Setup to repeat playback of each chapter/title/disc Setup to repeat playback of each chapter/title/disc

R.SRC 8 Selects playing mode for rear zone Selects playing mode for rear zone

SUBTITLE 9 Language selection for subtitle

14 Fast forwards the disc content Fast forwards the disc content

17 Selects the previous track/chapter for playback Selects the previous track/chapter for playback

18 Pauses playback/Starts playback Pauses playback/Starts playback

19 Selects the next track/chapter for playback Selects the next track/chapter for playback

GOTO 21 Goes to specific time frame and playback Goes to specific time frame and playback

22 Slow playback/slow rewind playback Slow playback/slow rewind playback

0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (Numeric Keypad)

29 Directly accesses chapter

NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purposes only.

USING THE TFT MONITOR

Open/Close TFT Monitor

Press the OPEN button (1) on the front panel or press the ( ) button (25) of the front zone remote control to open/ close the monitor.

TFT Monitor Auto Open

• If “TFT Auto Open” is “on” when the unit is turned on, the monitor automatically moves to the last viewing position.

• If “TFT Auto Open” is ”off” when the unit is turned on, press the OPEN button (1) or ( ) button (25) on the front zone remote control to move the monitor into the desired viewing position.

Monitor Tilt Angle Adjustment

A known characteristic of LCD panels is the quality of the display in relationship to the viewing angle. The monitor angle can be adjusted for optimum viewing using one of the following methods:

• Press the ( ) or ( ) buttons (3, 4) on the front of the unit to adjust the tilt angle of the screen one step at a time.

• Press and hold the to adjust the tilt angle of the screen one step at a time.

Rear Camera Mode

When the vehicle is placed in "Reverse", and an optional rear camera is connected to the VM9510TS, the TFT monitor will automatically switch to the camera input source.

Aspect Ratio

The following sources only have the WIDE and OFF aspect ratio option: AM / FM Tuner, CD-DA, SD Card, DVD+R/RW, DVD-R/RW and CD-R/RW with music files. Press the WIDE button (28) on the remote control to adjust the aspect ratio as follows:

FULL

The entire screen is extended horizontally to the aspect ratio of 16 to

9. The extension ratio is the same at any point.

WIDE

The screen is extended horizontally to the aspect ratio of 16 to 9. The extension ratio increases toward the right and left ends of the screen.

NORMAL

The conventional display image has a 4 to 3 ratio of horizontal to vertical, leaving a blank area on the right and left sides of the display.

OFF

Image Setting

Video Output Format

Table 3 shows the video output format for each playing source.

Table 3: Video Output Formats

Playing Source Video Output Format

TUNER RGB Mode DVD RGB Mode AUX IN CVBS Mode CAMERA CVBS Mode TV CVBS Mode

VM9510TS

NOTE: The default adjustment is “0” in PAL mode. Tint is unavailable for adjustment.

Parameter Adjustment Procedure

1. Enter Picture Quality Setting mode: Press the PIC button (24) on the remote or press and hold the WIDE/PICTURE button (2) on the unit.

2. Select Item to Set: Press the ( ) ( ) buttons (14, 22) on the remote or press and hold the ( ) or ( ) buttons (18, 19) on the front panel.

3. Set Parameters: Press ( ) ( ) buttons (17, 19) on the remote or press ( ) ( ) buttons (8, 9) on the unit.

4. Exit Picture Quality Setting Mode: Press the PIC button (24) on the remote or press and hold the WIDE/PICTURE button (2) on the front panel.

Parking Brake Inhibit

• When the “PRK SW” cable is connected to the brake switch, the display on the TFT monitor will display video only when the vehicle is applied.

• Parking brake function is overridden when the video source is set to CAMERA.

• When the parking brake inhibit is active, the front monitor displays “Parking Is On”, preventing the driver from watching content while driving. Rear video screens are not affected.

Monitor Movement Mechanism

If an obstruction occurs in the monitor path, the motion will stop automatically to prevent damage to the mechanism or monitor.

Normal operation is resumed by pressing the OPEN button (1) or disconnecting and reconnecting the power.

*CVBS – Composite Video Baseband Signal

Adjustable Parameters

While in DVD or TUNER mode, the only parameter that can be adjusted is brightness (BRIGHT). To access “PICTURE”, “COLOR”, “CONTRAST”, and “TINT” you must be in AUX or CAMERA mode.

VM9510TS

OPERATING INSTRUCTIONS

Power On / Off

Press the front of the unit light up and “WELCOME” appears briefly in the LCD panel (17), followed by the current mode status. If the TFT screen is open, only the current mode status is displayed. You can also turn on the unit by pressing the screen.

Press and hold the

POWER

is drawn back into the main compartment and the LCD screen displays “BYE BYE”.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The beep tone cannot be disabled.

Mute

Press the (3) on the remote to mute the volume from the unit. Press the button again to restore the volume. “MUTE” is displayed on the LCD monitor. Adjusting the volume or using any of the audio set-up features cancels the mute function.

Playing Source Selection

Press the SRC button (15) on the front panel or the SRC button (8) on the remote to change between available playing sources in the following order: TUNER, DVD, CD Changer, AUX IN, CAMERA (rear view video camera) and SD. The playing mode is displayed on the TFT and LCD screens.

AUX IN Mode

An external peripheral device can be connected to this unit via RCA output and “AUX-IN”.

CAMERA Mode

“CAMERA” mode is only available if the camera is connected and during reverse driving. To install a rear view video camera, connect the video input cable to the camera output cable.

Volume Adjustment

To increase or decrease the volume level, turn the

ENCODER

(15, 16) on remote control. When the volume level reaches “0” or “40”, a beep sounds, indicating that the adjustment limit has been reached. The volume ranges from “0” to “40”. The LCD or TFT screen displays the volume level for 3 seconds.

Programmable Turn-On Volume

This feature allows the user to select a turn-on volume setting regardless of the volume setting prior to turning the unit off.

/MUTE

button (7) to turn the unit on. The buttons on the

OPEN

button (1) and opening the TFT

/MUTE

button (7) on the front panel or the

button (4) on the remote to power off the unit.The monitor

/MUTE

button (7) on the front panel or the

MUTE

button

MUTE

ROTARY

(6) on the front panel or press the

VOL+/ VOL-

buttons

To program a specific volume level, push and hold the LO/DX button (6) while the yellow volume bar is displayed on the screen. The unit will beep two times to confirm your turn-on volume setting.

Audio Control Menu

The Audio Control feature allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. To get the best possible sound quality from your new system, be sure to adjust the settings for the speakers as well. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer.

Accessing the Audio Control Menu

Press the the “AUDIO” menu.

Selecting an Audio Feature for Adjustment

Continuously press the press the ( )/( ) buttons (14, 22) on the remote control or the ( )/( ) buttons (18, 19) on the joystick to select the audio feature to be adjusted.

Adjusting an Audio Feature

Rotate the VOL/LO/DX knob (6), press the ( )/( ) buttons (17,

19) on the remote control, or press the ( )/( ) buttons (16, 17) on the joystick to adjust the selected feature to the desired setting.

EQ User

BASS -14 to +14 TREBL -14 to +14 SUB -7 to +7 LOUD 0 (off), 1-4 FAD (Fade) -9 to +9 BAL -9 to +9

NOTE: The Bass and Treble levels are only adjustable when EQ is set to “User” mode.

VOL/LO/DX

knob (6) on the front panel once to display

VOL/

LO/

knob (6) on the front panel, or

Table 4: Audio Adjustments

Audio Function Adjustable Range

Flat Jazz Pop Classical Rock Vocal

The Loud function compensates for deficiencies in sound ranges at low levels. Loudness levels range from 1-4 or “off”. When the Loud function is on, LOUD is displayed on the screen.

Exiting the Audio Control Menu

Press and hold the

VOL/LO/DX

knob (6) or stop making

adjustments for a few seconds to exit the audio control menu.

Six-Channel Audio Control

NOTE: Before adjusting the volume of any speaker, please refer to “Surround Setup” on page 19.

Table 5: 6-Channel Audio Adjustments

Item Adjustable Range

Master Volume 00 to 40

Front Left Channel Volume -10 to +10

Front Right Channel Volume -10 to +10

Rear Left Channel Volume -10 to +10

Rear Right Channel Volume -10 to +10

Center Channel Volume -10 to +10

Subwoofer Volume -10 to +10

Rear Zone

If a monitor is installed in the rear zone and connected to the rear zone AV output, passengers in the back seat can control the DVD output using the rear zone remote control. See “Multi-Zone Remote Control” on page 9 for instructions.

System Reset

To correct a system halt or other illegal operation, use the tip of a pen to press the

RESET

button (22) located on the front bottom-right corner of the unit. After a system reset, the unit restores all factory default settings.

NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset is complete.

[RESET] Button

Line Mute

If the “MUTE” wire is connected, audio output mutes when a telephone call is received by the car phone or when verbal navigation is performed.

SYSTEM SETUP MENU

In “System Setup” mode, “ASP CONFIG” and “GENERAL SETUP” are available for adjustment. Setup can be performed by pressing the dedicated button on the remote control or by touching the top left corner of the TFT screen.

For system settings, press the SYS SETUP button (31) on the remote control or touch “SETUP” on the screen to enter the “SETUP” menu. “SYS SETUP” is highlighted in green.

General Setup Menu

Accessing the General Setup Menu

To access the “GENERAL SETUP” Menu, press the direction buttons on the joystick (16, 17, 18, 19) or remote control (14, 17, 18, 19, 22) to highlight “GENERAL SETUP” in green.

DIRECTION BUTTONS

Press the button (18) on the remote control to enter the “GENERAL SETUP” menu. A menu appears with the option for the first item, “Radio”, highlighted in light blue.

Selecting a Feature for Adjustment

Press the or buttons (14, 22) on the remote control or the or buttons (18, 19) on the joystick to select the feature to be adjusted.

Adjusting a Feature

1. Enter the option field for the feature you want to adjust by pressing the button (18) on the remote or by pressing the ENTER (joystick) button (20) on the unit. A submenu appears in a second row with the selected option highlighted in light blue.

2. Select a new value by pressing the or buttons (14,

22) on the remote control or the or buttons (18, 19) on the joystick.

3. Confirm your selection by pressing the , , or buttons (14, 17, 19) on the remote control, or the or button (16, 17) on the joystick. The new value is highlighted in light blue and setup is complete.

Table 6: General Setup Menu Features

Setting Options Function

Radio USA1 Select the appropriate setting

S. Amer 1 Arabia China S. Amer 2 Europe Korea

Clock Mode 12H Clock displays 12 hour time using

24H Clock displays 24 hour time up to

Screen Saver On Turn screen saver on/off.

Off

TV System Auto The color signal output is switched

NTSC The color signals are output in the

PAL The color signals are output in the

TFT Auto Open

OSD Language

Clock (HH:MM) See “Adjusting the clock” to learn

BACK Return to previous menu.

On The TFT panel automatically opens

Off You must press the OPEN button

English The menus are displayed in English

based on the country in which you reside.

AM and PM.

23:59.

automatically based on the current disc.

standard NTSC format.

standard PAL format.

when the unit is turned on.

(12) to open the TFT panel.

only.

how to set the clock.

VM9510TS

Adjusting the Clock

1. Access the “Clock” setting under the General Setup menu.

2. Press the or buttons (14, 22) on the remote control or the or buttons (18, 19) on the joystick to move the cursor to the “Hour” or “Min” position.

3. Press the or buttons (17, 19) on the remote control or the or buttons (16, 17) on the joystick to adjust the hour or minutes.

4. Press the button (14) on the remote control to confirm setup.

Returning to the System Setup Menu

To return to the System Setup menu, move to BACK, then press the button (18) on the remote control.

ASP (Audio Sound Processing) Config Menu

The ASP Config Menu allows you to make fine audio adjustments.

Accessing the ASP Config Menu

To access the “ASP CONFIG” Menu from the “SYSTEM SETUP” menu, press the direction buttons on the joystick (16, 17, 18, 19) or remote control (14, 17, 18, 19, 22) to highlight “ASP CONFIG” in green. Press the button (18) on the remote control to enter the “ASP CONFIG” menu. A menu appears with the option for the first item, “Bass Center Freq”, highlighted in light blue.

Adjusting a Feature

1. Enter the option field for the feature you want to adjust by pressing the button (18) on the remote or by pressing the ENTER (joystick) button (20) on the unit. A

VM9510TS

submenu appears in a second row with the selected option highlighted in light blue.

2. Select a new value by pressing the or buttons (14,

22) on the remote control or the or buttons (18, 19) on the joystick.

Table 7: ASP Config Menu Features

Setting Options Function

Bass Center Freq

Treble Center Freq

Sub.W Filter 80Hz Selecting a crossover frequency sets

Sub.W Phase 0D Subwoofer output IN phase

Bass Q-Factor 1.0 When the Bass Center Frequency is

BACK Return to previous menu.

60Hz According to the audio source, select 80Hz 100Hz 130Hz 150Hz 200Hz 10KHz According to the audio source, select

12.5KHz 15KHz 17KHz

120Hz 160Hz

180D Subwoofer output OUT OF phase

1.25

1.5

2.0

the Bass Center Frequency to achieve the best Bass effect.

the Treble Center Frequency to achieve the best Treble effect.

a cut-off frequency of the subwoofer's LPF (low-pass filter) and the “SMALL” speakers' HPF (high-pass filter). The Crossover frequency setting has no effect if the subwoofer is set to “OFF” and any other speaker is set to “LARGE”.

NOTE: Depending on your installation, reversing the subwoofer phase may increase Bass output.

selected, adjusting the Bass Q-Factor alters the sharpness of the Bass output.

MULTI-ZONE OPERATION

Independent sources can be played simultaneously on the VM9510TS. For example, a video game console can be seen on the front screen while DVD video is available to rear passengers.

NOTE: If DVD is selected as the front source and SD Card is selected for the rear source, then both sources will switch to SD Card. If SD Card is selected as the front source and DVD is selected for the rear source, then both sources will switch to the DVD source. Since the multimedia processor is shared between optical and SD Card media, one of the other can be selected but not both simultaneously.

Selecting a Source for the Front Zone

To access the FRONT ZONE SOURCE MENU, touch the TFT screen in the top left corner of the screen.

This menu allows you to select a source for the front zone.

Selecting a Source for the Rear Zone

To access the rear zone SOURCE MENU, touch the top right corner of the screen, near the Multi-ZONE icon.

Select the source to be directed to the rear Multi-ZONE RCA outputs.

NOTE: Optical media and an SD Card cannot be selected from the Multi-ZONE Source Menu simultaneously.

NOTE: The AM/FM tuner graphics will change to a "blue screen" background when any optical or SD Card media is selected from the Multi-ZONE menu. In addition, only the top left (Front Zone Source Menu) and right (MultiZONE Source Menu) quadrants of the touch screen are active during this mode of operation.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the SYS SETUP button (31) on the remote control or the DISP button (5) on the front panel.

TUNER OPERATION

Tuner TFT Display

1. Current Radio Band Indicator

2. Radio Frequency Indicator

3. Clock

4. Stereo Broadcasting Indicator

5. Strong Local Signal Broadcasting Indicator: Touch and hold to activate/deactivate Local function

6. Preset Radio Stations: Touch to recall preset stations or touch and hold to store a station

7. Front Zone Playing Mode

8. Rear Zone Playing Mode

9. User Defined Equalizer Level

10. Loud Setting Indicator

11. Current Preset Station Indicator

12. : Touch to seek backward

13. : Touch to seek forward

14. : Touch to tune backward one step

15. : Touch to tune forward one step

16. BAND: Touch to change between AM/FM bands

17. AS: Touch to automatically store stations

18. Touch this area to return to the MAIN MENU

Switch to Radio Tuner source

Press the SRC button (15) on the front panel or remote control (8) to switch to the TUNER source.

Select FM/AM Band

Touch the BAND button (16) on the screen, or press the BAND button on the unit (14) or remote control (20) to

change between the following bands: FM1, FM2, FM3, AM1, and AM2.

Auto Tuning

Press and hold the button (19) on remote control or screen, or the button on the joystick (17) to seek the next available radio station by increasing the tuning frequency. Press the button again to stop searching.

Press and hold the button (17) on the remote control or screen, or the button on the joystick (16) to seek the next available radio station by decreasing the tuning frequency. Press the button again to stop searching.

Manual Tuning

Press the or buttons (14, 22) on the remote control or screen, or the or buttons (18, 19) on the joystick to increase or decrease the tuning frequency one step.

Press and hold the buttons to continuously tune until you release them.

Using Preset Stations

Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the screen.

Storing a Station

1. Select a band (if needed), then select a station.

2. Touch and hold an on-screen preset button (6) for three seconds. The preset number appears at the top of the screen.

Recalling a Station

1. Select a band (if needed).

2. Touch an on-screen preset button (6) to select the corresponding stored station.

Auto Store (AS)

Automatic Storing of Preset Stations

To select six strong stations and store them in the current band:

1. Select a band (if needed).

2. Touch AS (26) for 2 seconds to activate the Auto Store function.

The new stations replace stations already stored in that band.

VM9510TS

Local Radio Station Seeking (LOC)

When the Local function is on, only radio stations with a strong radio signal are played. To activate the Local function in AM/FM tuner mode, press and hold the LO/DX button (6) on the front panel while the yellow volume bar IS NOT visible. Press LO/DX again to turn Local off. When the Local function is active, “LOC” appears on the screen and a green indicator is illuminated.

VM9510TS

DVD PLAYER OPERATION

NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applicable, will operate normally.

Opening/Closing the TFT Video Screen

Opening the TFT Screen

To open the TFT video screen, press the OPEN (1) button. The unit beeps and then open.

Closing the TFT Screen

Press the OPEN (1) button again to close the TFT screen. If the screen is in the “IN” position, it moves out before closing.

Insert/Eject Disc

Upon inserting a DVD disc, DVD mode is entered disc play begins.

NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit code must be entered and/or the disc must be authorized (see “RATING (Parental Lock) Menu” on page 20).

You cannot insert a disc if there is already a disc in the unit or if the power is off.

NOTE: CD-R/RW, DVD-R/RW, DVD+R/RWs will not play unless the recording session is closed.

Ejecting a Disc

Press the button (21) on the unit or remote control (25) to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the power off and the unit remains off after the disc is ejected.

Reset the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism operation occurs, press and hold the button (21) on the

unit or remote control (25) to reset the loading mechanism. Normal operation resumes.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted, press the SRC button (15) on the front panel or remote control (8) until DVD appears at the bottom of the screen.

Using the Touch-Screen Controls

The touch key areas for DVD playback are outlined below.

A – Return to MAIN MENU B – DISP key: Displays playing information C – Select previous chapter D – Select next chapter E – Display the following on-screen controls: Menu,

, , , .

, ,

Controlling Playback

Stopping Playback

Touch the stop button ( ) on the screen or press the / BAND button (20) on the remote control to stop DVD play.

Pausing Playback

Touch the play/pause button ( ) on the screen or press the

button on the remote control (18) to suspend or resume

disc play.

Slow Motion Playback

Press the button (22) on the remote control or the button (19) on the joystick to play the current title in slow motion at 1/2, 1/4, 1/6 or 1/7, the normal speed. Press (18) to resume normal play. Continue pressing the or button to slow reverse.

Repeat Playback

Press the REPT button (7) on the remote control to alter repeat mode according to the following:

• DVD: Repeat Title, Repeat Chapter, Repeat Off

• VCD (PBC Off): Repeat Single, Repeat Off

• MP3: Repeat Single, Repeat Folder, Repeat Off

NOTE: For VCD play, the repeat function is not available if PBC is on.

Sectional Repeat Function (A-B)

Use the A-B function to define a specific area of a disc to repeat.

• Press the REPT A-B button (6) on the remote control to

set the start point (A) of the repeated section.

• Press the REPT A-B button again once you reach the

desired end point (B) of the repeated section. The selected portion of the DVD will now repeat continuously.

• Press the REPT A-B button again to cancel the A-B

section setting and stop repeat play.

Random Playback

With a DVD, VCD, or CD playing, press the RDM button (33) on the remote control to activate random playback and play all chapters/tracks in random order. “On” appears on the screen.

Press the button (19) on the remote control or the button on the joystick (17) to play the next random track.

Press the RDM button again to turn random play off.

NOTE: When a VCD is playing with PBC turned “On”, activating random playback automatically turns PBC off.

Accessing the DVD Menu

Press the MENU button (1) on the remote control to recall the main DVD menu. Use the directional (arrow) buttons ( , ,

& ) on the joystick (16, 17, 18, 19) to select a title from

the menu.

Press the TITLE button (2) on the remote control to select a different title for playback.

Press the button (18) on the remote control or the ENTER (joystick) button (20) to confirm your selection and begin playback.

Moving Through Chapters

Press the button (19) on the remote control or the button on the joystick (17) to advance to the next chapter on the DVD.

Press the button (17) on the remote control or the button on the joystick (16) to move to the previous chapter.

VM9510TS

Fast Forward/Fast Reverse

Press the button (14) on the remote control or the button (18) on the joystick to fast forward. Keep pressing and releasing the button to increase the rate from “2X” to “4X”,

“8X”, and “20X”. Continue pressing the or button to fast reverse.

Scanning

Press the SCN button (34) on the remote control to play the first ten seconds of each chapter. Press SCN again to stop the scan function and play the current chapter.

Selecting 2-Channel and 6-Channel Audio Playback

2-Channel Audio (Down Mix) Support for CD, SD Card and DVD

Linear pulse code modulation (LPCM) and pulse code modulation (PCM) support is available for CD, SD Card and DVD discs when 2-channel audio is selected.

6- Channel Audio Support for CD, SD Card and DVD

Surround I is available for decoding analog or digital 2channel down mixed sources. Surround II is available for decoding digital bit-stream sources.

NOTE: 2-Channel audio support is available for AM / FM tuner, TV tuner and Auxiliary input only.

Table 8: Speaker Output Options

Speaker Setup

2CH mode X X Play 2CH audio in

6CH mode with Surround “Off”

Play 2-channel (down mix) audio in 6-channel mode with Surround I "ON"

Play 6-channel audio in 6-channel mode with Surround II "ON"

Front

Spkr

XXX X

Rear Spkr

Center

Spkr

Sub-

Woofer

Goto Search

During DVD or VCD playback, perform the following steps to use the GOTO feature to access a specific location on a disc:

1. Press the GOTO button (21) on remote control to enter

“GO TO” mode.

2. Press the or buttons (14, 22) on the remote control or the or buttons (16, 17) on the joystick to select a category (highlighted in blue).

• For DVD mode, you can choose Time or Title/

Chapter search.

DVD Search

Time – Go to specific time in current title

Title/Chapter – Go to specific time in a chapter

• For VCD mode, press the GOTO button to choose

between Track Search, Disc Search and Exit.

VCD Track Search

Time – Go to specific time in the current track

Track – Go to specific track

VCD Disc Search

Time – Go to specific time on disc

Track – Go to specific track

3. Enter a time into the field using the numeric keypad (29) on the remote control.

4. Press the button (18) on the remote control or the ENTER (joystick) button (20) to go to the specified location on the disc.

5. Press the GOTO button again to exit.

Direct Chapter / Track Selection

During DVD, VCD and CD playback, you can use the numeric keypad on the remote control (29) to access a track directly.

Viewing an Alternate Picture Angle (DVD Only)

Some DVDs contain scenes that have been shot simultaneously from different angles. For discs recorded with multiple angles, press the ANGLE button (13) on the remote control to toggle available angles of the on-screen image.

Zooming

Press the ZOOM button (23) on the remote control to enlarge and pan through the video image using the following options: “Q1”, “Q2”, “Q3”, and “OFF”.

Multi-Language Discs (DVD Only)

Changing Audio Language

If you are watching a disc recorded in multiple languages, press the AUDIO button (5) on the remote control to choose a language.

Changing Subtitle Language

If you are watching a disc recorded in multiple languages with subtitles, press the SUBTITLE button (9) on the remote control to choose the language in which you would like the subtitles to appear.

NOTE: During VCD playback, press the AUDIO button (5) on the remote control to choose between Left Channel, Right Channel, and Stereo.

PBC (Play back Control) (VCD Only)

For VCDs with play back functionality, play back control (PBC) provides additional controls for VCD playback.

Press the MENU button (1) on the remote control to toggle the PBC function “On”/”Off”. Once PBC is on, playback starts from track one of the play list.

NOTE: When PBC is activated, fast forward, slow playback, and previous/next track are available. Repeat and direct track selection are not available.

When PBC is activated, selecting random, scan, or search playback automatically deactivates PBC.

Playback Information

During DVD and VCD playback, press the DISP button (10) on the remote control to display playback information on the screen, including the media playing and current playback time.

DVD Playback Information

The following information is displayed at the bottom of the screen during DVD playback:

• T : 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is currently playing.

VM9510TS

• C : 2/16 – “2 / 16" indicates that the second of 16 titles on the DVD is currently playing.

• 00:41:28 – “00:41:28” indicates the playback time of the current title.

• 2 / 6 Eng – The language display information indicates the second language out of 6 (English) is currently being used.

The following information appears at the bottom of the screen during DVD playback:

Front: DVD Rear: AUXIN SURR II DSP

• Front: DVD is the current playback source for the front zone.

• Rear: AUX IN is the current playback source for the rear zone. "Surround II" is the selected playback audio encoding process. "DSP" indicates Digital Signal Processing.

VCD Playback Information

The following information is displayed on the screen during VCD playback:

• VCD2.0 – Format of current disc.

• T: 6/18 – “6/18” indicates the sixth of 18 tracks on the VCD is currently playing.

• 00:02:18 – “00:02:18” indicates the playback time of the current track.

The following information appears on the screen during VCD playback in 6-Channel mode:

• Front: DVD – “DVD” is the current playing source for the front zone.

• Rear: AUX IN – “AUX IN” is the current playing source for the rear zone.

• EQ:FLAT – The equalizer setting is FLAT.

• Loud: Level 1 – The Loud option is set to Level 1 loudness.

General Disc Information

Table 9: Disc Properties

Symbo

12cm Disc Properties

Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18)

Single side single layer (VCD)

Single side single layer 74 minutes

Table 10: Disc Symbols

Symbol Meaning

Number of voice languages recorded. The number inside the icon indicates the number languages on the disc (maximum of 8).

Number of subtitle languages available on the disc (maximum of 32).

Number of angles provided (maximum of 9).

Max Play

Time

(MPEG 2

Method) 133 minutes 242 minutes 266 minutes 484 minutes

(MPEG 1

Method)

74 minutes

Table 10: Disc Symbols

Symbol Meaning

Indicates the region code where the disc can be played.

• Region 1: USA, Canada, East Pacific Ocean Islands

• Region 2: Japan, Western Europe, Northern Europe, Egypt, South Africa, Middle East

• Region 3: Taiwan, Hong Kong, South Korea, Thailand, Indonesia, South-East Asia

• Region 4: Australia, New Zealand, Middle and South America, South Pacific Ocean Islands/ Oceania

• Region 5: Russia, Mongolia, India, Middle Asia, Eastern Europe, North Korea, North Africa, North-West Asia

• Region 6: Mainland China

• ALL: All regions

Front: DVD Rear: AUXIN MPEG MOVIE

• Front: DVD – “DVD” is the current playing source for the front zone.

• Rear: AUX IN – “AUX IN” is the current playing source for the rear zone. “MPEG” is the decoding method in use. "Movie" indicates that movie effects are being applied to the audio sound track from the VCD.

The following information appears on the screen during VCD playback in 2-Channel mode:

Aspect ratios available. “LB” stands for Letter Box and “PS” stands for Pan/Scan. In the example on the left, the 16:9 video can be converted to Letter Box video.

DVD SETUP MENU

In “DVD Setup” mode, “LANGUAGE”, “VIDEO”, “AUDIO” “SURR SETUP”, “SURROUND FX”, and “RATING” (parental lock) are available for setup. This operation can be performed using the remote control or joystick controls.

Accessing the DVD Setup Screen

Setup can be performed by pressing the dedicated button on the remote control or by pressing the SRC button (15) on the front panel.

For system settings, press the DVD SETUP button (30) on the remote control or touch “SETUP” on the screen to enter the “SETUP” menu. “SYS SETUP” is highlighted in green.

To access the “DVD SETUP” Menu, press the button (7) on the remote control to choose the “DVD SETUP” option, then press the button (18), or just touch “DVD SETUP” on the screen. “LANGUAGE” is highlighted in green.

NOTE: Once the DVD setup is complete, the settings are memorized. To return to the factory default settings, press the RESET button (25) on the front panel.

Accessing a Menu

To access a menu (LANGUAGE, VIDEO, AUDIO, SURR SETUP, SURROUND FX, or RATING), press the direction buttons on the joystick (16, 17, 18, 19) or remote control (14, 17, 18, 19, 22) to highlight the desired menu in green. You can also touch the on-screen menu selection to access that menu.

DIRECTION BUTTONS

Selecting a Feature for Adjustment

Once inside a menu, press the or buttons (14, 22) on the remote control or the or buttons (18, 19) on the joystick to select the feature to be adjusted.

Adjusting a Feature

2. Select a new value by pressing the or buttons (14,

22) on the remote control or the or buttons (18, 19) on the joystick.

LANGUAGE Menu

If a DVD supports more than 1 Subtitle or Audio language, all the languages are available for selection during playback. If the selected language is not supported by the DVD, then the default language is used. During playback, press the SUBTITLE (9) or AUDIO (5) button on the remote control to change the language directly. This will not affect the DVD menu settings.

Table 11: LANGUAGE Menu Features

Setting Options Function

Subtitle English Select the default language in which

Auto Off

Audio English Select the default language in which

you would like subtitles (if applicable) to be displayed.

you would like audio (when optional) to be played.

VM9510TS

Table 11: LANGUAGE Menu Features

Setting Options Function

DVD Menu English Select the default language in which

BACK Return to previous menu.

VIDEO Menu

Table 12: VIDEO Menu Features

Setting Options Function

TV Shape (Aspect Ratio)

Angle Mark

View Mode Fill

BACK Return to previous menu.

NOTE: For standard discs not formatted for “widescreen”, use of the 16:9 aspect ratio will result in image distortion.

4:3 PS With 16:9 display, the left and right sides

4:3 LB With 16:9 display, the top and bottom are

16:9 Image is presented in wide view with a

On Angle indicator (if applicable) is shown. Off Angle indicator is not shown.

Original H Fit W Fit Fit to

Scrn Pan Scan

you would like the DVD menu (if applicable) to be displayed.

are cut off.

cut off.

16:9 aspect ratio.

VM9510TS

AUDIO Menu

The VM9510TS has a built-in Pink Noise generator to help set the relative speaker levels for multi-channel audio playback.

Table 13: AUDIO Menu Features

Setting Options Function

Pink Noise

DRC Off Employ the Dynamic Range Control for

CNTR CTRL

REAR CTRL

Down Sampling

BACK Return to previous menu.

NOTE: When Down Sampling is ON, the audio output signal will be converted to 48kHz. When Down Sampling is OFF, the original sampling frequency is preserved.

Off Stop output of pink noise Left Left channel pink noise Center Center channel pink noise Right Right channel pink noise Left Surr Left surround channel pink noise Right Surr Right surround channel pink noise Subwoofer Subwoofer pink noise

On 5ms Adjust the time difference between the 4ms 3ms 2ms 1ms 0ms 15ms Adjust the time difference between the 12ms 9ms 6ms 3ms 0ms Off Normal Output on Audio signal output at 48kHz

better playback for low volumes.

center and front speakers to create a time delay between 1 and 5 milliseconds, producing a more accurate audio effect.

rear and front speakers to create a time delay between 3 and 15 milliseconds, producing a more accurate audio effect.

SURR SETUP Menu

To change speaker settings for 2-channel mode, use the or buttons (14, 22) on the remote control or the or buttons (18, 19) on the joystick to select “DownMix”. To change speaker settings for 6-channel mode, select “Full 6CH”.

After selecting 2 or 6-channel mode, use the button

(19) on remote control or the button on the joystick (17) to move to the speaker settings on the right.

Speaker Selection

Selecting LARGE for the multi-channel speaker option will give a full range output. Selecting SMALL for the multichannel speaker option will activate a high pass filter whose crossover is dependent upon the sub-woofer low pass filter frequency. For example, if the subwoofer low pass filter is set to 80Hz, then the high pass SMALL speaker crossover will be set to 90Hz.

Low pass High pass

80Hz 90Hz 120Hz 135Hz 160Hz 180Hz Refer to Table 14 when selecting speaker options for each

mode.

Table 14: SURR SETUP Menu Features

Setting Options Function

FL (Front Left) / FR (Front Right)

Large Use when front speakers have

Small Use when speakers do not have

good bass output.

Table 14: SURR SETUP Menu Features

Setting Options Function

LR (Left Rear) / RR (Right Rear)

SUB (Subwoofer) Present Use when subwoofer is present.

CTR (Center) Large Use when center speaker has

BACK Return to previous menu.

Large Use when rear speakers have

Small Use when rear speakers do not

None Use when rear speakers are not

None Use when subwoofer is not

Small Use when center speaker does

None Use when center speaker is not

good bass output.

have good bass output.

present.

good bass output.

not have good bass output.

present.

SURROUND FX

Table 15: SURROUND FX Menu Features

Setting Options Function

Decode Mode Off Play original audio format.

Surround I Use Surround I decoding method. Surround I

Matrix Surround I

Movie Surround I

Music

Panorama (Only available when Surround I Music Mode is activated.)

Dimension Ctrl 0-6 Shift audio output between front

Center Width Ctrl 0-6 Shift audio output between front

BACK Return to previous menu.

On Extend the video from the front to

Off Panorama is turned off.

NOTE: Surround I is recommended when the playback source is LPCM (Linear Pulse Code Modulation) or 2channel down mixed digital bit-stream.

Play mono output with surround effect.

Enhance movie surround effects.

Play surround music effects.

the rear to achieve a better surround effect.

and rear speakers.

and center channel speakers.

NOTE: When Surround I Music mode is selected, Dimension Control and Center Width are available for fine tuning to achieve a more realistic surround sound processing.

RATING (Parental Lock) Menu

The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once setup, the parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup.

Table 16: RATING Menu Features

Setting Options Function

Password _ _ _ _ Enter a 4-digit password to acti-

Rating 1. Kid Safe Select the appropriate rating level

2. G

3. PG

4. PG-13

5. PG-R

6. R

7. NC-17

8. Adult

Load Factory Reset Select “Reset” to restore the fac-

BACK Return to previous menu.

vate the “Rating” feature.

for the intended audience.

You may override higher ratings by using your password.

tory default settings for the Rating

system only.

VM9510TS

To reset the password, access the “RATING” menu and enter the current password. Once the correct password is entered, you can access the “Password” field and enter a new one.

NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc packing, or documentation. If the rating is not available on the disc, the parental lock feature is unavailable. Some discs restrict only portions of the disc and the appropriate content will play. For details, please refer to the disc description.

VM9510TS

CD/MP3/WMA OPERATION

Instructions for Insert/Eject, Play/Pause, Stopping Playback, Track Selection, Fast Forward/Fast Reverse, Scan, and

Random Play Please see the DVD Player Operation section for information about these topics.

NOTE: CD-R and CD-RW will not play unless the recording session is closed.

The file naming formats listed below are compatible with this unit:

• ISO 9660 – file name: 12 characters, file extension: 3

• ISO 9660 – file name: 31 characters, file extension: 3

• Joliet – 64 characters If the file or folder name does not conform to ISO 9660 file

system standards, it may not be displayed or played back correctly.

CD Player User Interface

The on-screen indicators and touch key areas for CD playback are outlined below.

1. Current track and total number of tracks on disc

2. Elapsed playing time

3. Touch to activate/deactivate Repeat play mode

4. Touch to activate/deactivate Scan mode

5. Touch to activate/deactivate Random mode

are the same for DVD, CD and MP3 operation.

characters

6. Current time

7. Disc Title

8. Track Title

9. Touch to return to MAIN MENU

10. : Touch to play/pause disc playback

11. : Touch to stop disc playback

12. : Touch to move to previous track

13. : Touch to move to next track

14. : Touch to rewind current track

15. : Touch to fast forward current track

16. Front Zone Playing Mode

17. Rear Zone Playing Mode

18. Encoding method of media being played

19. "Surround Music" effect selected

MP3/WMA Discs

This player allows you to playback MP3 files recorded on CDROM, CD-R, and CD-RW. For CD-RW discs, please make sure it is formatted using the full method and not the quick method to prevent illegal disc operation.

Use the following settings when compressing audio data for your MP3 disc:

• Transfer Bit Rate: 320kbps

• Sampling Frequency: 48kHz

When recording MP3 up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to maximum disc capacity, use the "Disc at once" setting.

Playing MP3/WMA Files

After inserting a MP3/WMA disc, files will play in the sequence of the “Root’ directory.

Use the numeric keypad (29) on the remote control to access files directly.

Selecting a Playback Mode

1. Press the /BAND button (20) on the remote control to stop disc play.

2. Press the button (19) on the remote control or the button on the joystick (17) to enter playback mode (PLAY MOD).

3. Press the , , or buttons (18, 17, 19) on the remote control, or the or button (16, 17) on the joystick to choose from the following playback options:

Table 17: MP3/WMA Playback Modes

Play Mode Playback Details

Disc Normal Playback all files on the disc and

stop at the end.

Table 17: MP3/WMA Playback Modes

Play Mode Playback Details

Disc Repeat Repeat playback of all files on

Random Randomly play all files and stop

Single Track Play a specific file and stop. Repeat Track Repeat playback of a specific

Folder Normal Play all files in a folder and stop

Folder Repeat Repeat playback of all files in a

the disc.

at the end.

file.

at the end.

folder/directory.

4. Press the button (14) on the remote control to confirm the playback mode then press the button (18) to begin playback.

+ 57 hidden pages