Audiovox SIRIUS SRSIR-001, SRSIR-001 User Manual
SATELLITE DIGITAL AUDIO
CONTROL AND
RECEIVER SYSTEM
®
MODELS
Released: 06-18-02.
Revision A: Added Model Number: 08-20-02.
SATELLITE RECEIVER SYSTEM
SRSIR-001,
SRSIR-001FM
and SRSIR-001FMR
OO
WNER'SWNER'S
O
WNER'S
OO
WNER'SWNER'S
MANUMANU
MANU
MANUMANU
128-6374A
ALAL
AL
ALAL
1 of 12
CONTENTS
Trademarks ...................................................................................... 2
How to Subscribe to SIRIUS® Radio ................................................ 2
Introduction ........................................................................................ 2
How the System Operates ................................................................. 2
Satellite System Control Unit (SCU) ................................................... 3
Satellite Radio Receiver Unit (RRU) .................................................. 4
Functional Operation ......................................................................... 5
Powering Up the System ............................................................ 5
Displaying the Identification (ID) Code ........................................ 5
Selecting a Satellite Channel ...................................................... 5
Using the Up/Down Buttons .................................................... 6
Selecting Channel Categories or Groups ................................ 6
Directly Accessing a Channel ................................................. 7
Confirmation Tone(s) Function.................................................. .... 7
Presetting a Desired Channel ................................................ 7
Special Functions Using the Shift Button .................................... 8
Direct FM Frequency Selection ............................................... 8
System Default Shift Code ...................................................... 8
LCD Contrast Shift Code ......................................................... 8
LCD Backlight Dimming Shift Code ......................................... 9
Button Confirmation Tone Shift Codes .................................... 9
LCD Backlight Color Shift Codes ........................................... 9
Scan Set Shift Codes ............................................................. 9
Channel/Category/ Selection Shift Codes .............................. 9
Channel Skip Shift Code ......................................................... 9
Display Messages ............................................................................. 9
Troubleshooting Considerations................................................................10
Specifications...................................................................................................10
Warranty.............................................................................................................11
ABOUT SIRIUS®
Congratulations. You are one step closer to experiencing Sirius Satellite Radio. Sirius will revolutionize you’re in-vehicle entertainment with:
· 100 channels of original programming, including –
· 60 channels of completely commercial-free music –
guaranteed.
· 40 channels of news, sports and entertainment
· Coast-to-Coast reception
· Digital-quality sound
All music content is selected and developed in-house by Sirius’ team of
Master Music Programmers – talented and seasoned professionals
who love the music as much as the listeners. World-class partners
such as ESPN, ABC, CNBC, Bloomberg, Discovery and Radio Disney
are developing news, sports and entertainment programming.
WHAT TO DO TO GET SIRIUS®
It’s easy. You have one of two choices to activate your service:
(1) Visit the website at siriusradio.com
Click on the “JOIN” section. You will then need to follow some
simple directions and provide us with some critical information in
order to activate your service.
(2) Call us at 1-877-539-SIRIUS (7474)
One of our friendly Customer Care representatives will take the
necessary information and walk you through the activation process.
WHAT DO YOU NEED
There are a couple of pieces of information that you will need when you
are ready to activate the service. Please have the following ready:
· Sirius ID number / ESN – from the tuner module
· Vehicle Identification Number
Valid Credit Card information
Trademarks
SIRIUS® is a registered trademark of SIRIUS® Satellite Radio. All Rights
Reserved. www.sirius.com
Other product names mentioned in this manual may be trademarks
or registered trademarks of their respective companies and are hereby
acknowledged.
HOW THE SYSTEM OPERATES
Control of system functions is achieved by the wired SCU, which can be
conveniently mounted to the dashboard in a number of configurations. In
addition, an optional wireless remote (Audiovox P/N SAT-RC) to control
SCU functions is also available. The SIRIUS® Satellite Radio signals
are received by the antenna and are routed to the RRU, whose RF output
is supplied to the FM Switching Box.
2
128-6374A
2 of 12
The FM Switching Box, in turn, is capable of transmitting on 7 FM frequencies; namely, 88.1MHz, 88.3MHz, 88.5MHz, 88.7MHz, 88.9MHz,
89.1MHz and 89.3MHz.
The frequency is selected using the FM band of the existing vehicle radio.
(The default FM frequency is 88.5MHz.) Select the FM frequency with the
least noise or static, and then use the SCU to choose the SIRIUS
channel for your listening pleasure.
NOTE: When a FM frequency is not desired entering the following code
can be use to mute it: (SFT) + 0928 + (SFT)
AUDIO OX
AUDIO OUT
R
SAT.TER. TO SCU POWERL
SATELLITE RADIO RECEIVER
POWER HARNESS
FM SWITCHING BOX ASSY
RCA to RCA CABLE
-or-
SATELLITE RADIO RECEIVER
AUDIO OX
AUDIO OUT
FM
POWER
TO SCUTER. SAT. LR
OUT
1 2
45
78
AUDIO OX
SATELLITE CONTROL
6-DIN CABLE
SATELLITE ANTENNA
3
6
9
0
SFT
Figure 1. SIRIUS® Satellite Receiver System
SATELLITE SYSTEM CONTROL UNIT (SCU)
The SCU provides for complete control of the system by means of its
Liquid Crystal Display (LCD) and associated function buttons.
1
®
AUDIO OX
2, 8
1
4
7
7
3
2
5
6
8
9
0
SFT
5
6
3
4
9
Figure 2. Satellite System Control Unit (SCU)
1. Liquid Crystal Display (LCD): Presents a display of various broad-
cast, song title, performer(s), advisory/error messages, etc.
2. Down Directional (
leased, the channel number will decrease with each press; when pressed
and held, the channel number will decrease continuously. Release the
button when the desired channel number is displayed. When used in
conjunction with the Shift (SFT) button, the MUTE function is enabled.
(See Mute Function Button section below)
3. Keypad Buttons 0-9: These buttons are used to directly enter a desired
channel number. Momentarily press the Shift (SFT) button followed by
the desired channel number then the Shift (SFT) Button. They are also
used when entering and recalling preset channel numbers into memory.
4. Up Directional (
the channel number will increase with each press; when pressed and
held, the channel number will increase continuously. Release the button
when the desired channel number is displayed. When used in conjunction with the Shift (SFT) button, the SCAN function is enabled. (Refer
to the Scan Function Button section)
5. Infrared Detector: Provides detection of the infrared control signal
transmitted by an optional wireless remote control unit (P/N SATRC) for remote operation. Make sure no obstructions are blocking the
signal path.
6. Shift (SFT) Button: When momentarily pressed, this button provides access to additional functions, such as audio MUTE, Channel
SCAN, Direct Channel Access, Category Select, Parental Lock-Out
etc.
3
) Button: When momentarily pressed and re-
WW
W
WW
) Button: When momentarily pressed and released,
XX
X
XX
128-6374A
3 of 12
When pressed and held, this button allows you to switch between pre-set
channel groups 1 and 2. This button is also used to invoke the Category
Mode, which can also be achieved by Momentarily Pressing and Releas-
ing the (SFT) button then Pressing and Holding the (SFT) button again
for 2 seconds, “ENTER CATEGORY TUNE” or “ENTER CHANNEL
TUNE” will be displayed .
7. Power On/Off ( ) Button: Press this button to apply power to the
Satellite Radio Receiver system. The associated radio must be turned on
and off separately using its power switch.
This button is also used to back light the number keys when the system is
on. To do so, momentarily pressed and release the Power On/Off Button.
The back lighting will last for 10 seconds.
8. Mute Function Button: Momentarily press the shift (SFT) button;
then press and hold the Down directional (
mute function. When enabled, the audio program is muted and the Mute
icon ( ) appears in the lower right corner of the SCU display. Press
any button to exit the mute function.
9. Scan Functions:
Scanning All Channels – [enter code (SFT)+0960+(SFT)] Momen-
tarily press the Shift (SFT) button; then press and hold the Up directional
button (
enabled, each channel is scanned in the either direction for 10 seconds
before moving on to the next active channel. This permits channel preview
or introductory sampling of channel programming. The channel (CH) icon
on the SCU screen will appear in reverse image (white-on-black) format.
Press any button to exit the Scan function.
Scanning Preset Channels - [enter code (SFT)+0961+(SFT)] This
function works in the same way as the Scanning All Channels mode,
except this mode will only scan the preset channels. You can configure a
total of 40 preset channels, 20 in Channel Mode (two groups of 10 channels, upper and lower) and 20 in Category Mode (two groups of 10
channels, upper and lower). Preset channel being previewed are displayed
in the lower right corner. A black number on white background indicates
that it is part of the upper group of channels and a White number on a
Black background indicates that it is part of the lower group. When
scanning these channels an indicator will appear in the right corner of the
screen.
) for 2 seconds to enable the Channel Scan function. When
XX
X
XX
) button to enable the audio
WW
W
WW
·(SR1) = Lower Preset Channel Group (first 10 channels)
·(
To switch between the two groups of preset channels press and hold
the Shift (SFT) button for 2 seconds until a tone is heard indicating the
switch was made.
SR2) = Upper Preset Channel Group (next 10 channels)
SATELLITE RADIO RECEIVER UNIT (RRU)
The RRU is a central data-receiving unit, which is required to process
the satellite signals received by the externally mounted antenna
(purchased separately). The RRU contains the processing logic needed
to recognize, decode the incoming SIRIUS® program information and
then distribute a recognizable RF signal to the FM Switching Box .
NOTE: The SIRIUS® signal can be received and processed virtually
anywhere as long as there are no obvious Satellite Signal Obstructions
such as parking garages, tunnels.
The RRU is typically installed under the seat or in the trunk/rear of the
vehicle.
4
128-6374A
4 of 12
Loading...