Audiovox PSD100, PSD100C Installation Manual

Front or Rear Parking Sensor System

Model: PSD100 / PSD100C

Installation Manual

1

TABLE OF CONTENTS

Warnings.......................................................................................4

Product Description......................................................................5

Packing List..................................................................................6

Installation Instructions ................................................................7

Mounting the Sensors .......................................................7

Installing the Power Harness (REAR)..............................9

Installing the Power Harness (FRONT).........................10

Mounting the Speaker.....................................................11

Mounting the Mute/On-Off Button .................................12

Control Module Dip Switch Settings..............................12

Mounting the Control Module........................................13

Setting the Learning System.......................................................14

Specifications..............................................................................15

Maintenance................................................................................15

Troubleshooting..........................................................................15

Warranty.....................................................................................45

2

Features

• Front or rear install

• Adjustable range to 7ft

• Adjustable sensitivity

• Upgradeable to a 4-sensor system

(requires part #: PSD200/PSD200C)

• Learning capability to ignore vehicle mounted objects

• Auto-mute capability for use with trailer

• Easy install active learning front system

• Includes 0° and 8° sensor sleeves to fit most bumpers

• Will not drain battery or void factory warranty

• Includes adjustable speaker with tricolor LED

• Works with any vehicle

3

Warnings

This product is intended to assist in safe driving by signaling the driver of
the distance to obstacles in close proximity to the vehicle while the vehicle
is in reverse or moving forward slowly. You, as the driver, are solely
responsible for the safe operation of your vehicle and the safety of your
passengers according to your local traffic regulations. Do not use any
features of this system to the extent it distracts you from safe driving. Your
first priority while driving should always be the safe operation of your
vehicle. Audiovox Electronics Corporation cannot accept any
responsibility whatsoever for accidents resulting from failure to observe
these precautions or safety instructions.

1. This product utilizes high voltage. Any unauthorized modifications

or damage to the product may result in electrical shock. Handle all
components with care. Inspect regularly for damage to
components and cabling.

2. You are responsible for ensuring that the installation of this

product does not void or affect the vehicle manufacturer’s
warranty.

Audiovox Electronics Corporation or its subsidiaries are

not liable in full or in part for improper installation resulting in
loss or damage to your property, or for voiding all or part of the
vehicle manufacturer’s warranty.

3. Do not apply excessive force to any of the components contained

within this kit. Excessive force used before, during or after
installation that results in a damaged or non-functional part will
void all warranties.

4. Please follow the procedures in this installation manual. Improper

installation or modification of this product will void all warranties.

4

Product Description

This Front or Rear Parking Sensor System is designed to assist the driver
by providing an alert when the vehicle is traveling toward a nearby object.
Never rely solely on this product to ensure the area is clear of children
and/or obstructions. This product is not intended to replace existing safety
procedures, but rather to add an additional safety tool for your vehicle

.

Packing List

The model PSD100 Front or Rear Parking Sensor System consists of the
following items:

1. Control Module

2. Sensors, 2 each, with 19.68ft length of cable

3. 9-foot power cable

4. Tricolor LED display/speaker with 9ft length of cable

5. Auto-Mute button with 9ft length of cable

6. 2 each of the following sensor sleeves:
a) 0 degree
b) 8 degree

7. Hardware bag includes:
a) 2 tap connectors
b) 6 cable ties
c) Velcro tape 2pcs (1-module, 1-speaker)
d) Alcohol swab pad
e) Lock screw for buzzer/LED (speaker) module
f) Grounding screw/washer/ring terminal

8. Installation Manual

9. User Manual

5

Installation Instructions

Before installing this product, take time to familiarize yourself with the items
in the box and use the packing list to verify all parts are present.

Mounting the Sensors

Choosing the Correct Sensor Sleeve

Use the application guide below to determine whether a sensor
sleeve will be required. This will affect the diameter of the hole in
the bumper.