Audiovox CE105 User Manual
P-105
AM/FM/MPX RADIO WITH COMPACT DISC PLAYER,
CD CHANGER CONTROLS AND QUARTZ CLOCK
OO
WNER'SWNER'S
O
WNER'S
OO
WNER'SWNER'S
MAMA
MA
MAMA
NUALNUAL
NUAL
NUALNUAL
INDEX
Page
Operating Instr uctions ................................................................ 3 - 9
Setting the Clock ..........................................................................10
CD Player Error Codes.................................................................10
CD Changer Controls...................................................................11
CD Changer Error Codes.............................................................12
Specifications ...............................................................................13
Care and Maintenance.................................................................14
Warranty.......................................................................................15
-2-
OPERATING INSTRUCTIONS
1 POWER ON-OFF BUTTON ( PWR )
Pre ss th is bu tton to turn the unit on or of f. If the ignition switch is
“on”, the unit will turn on automatically when a compact disc is
inserted.
2 VOLUME CONTROL BUTTONS ( VOL / )
T o increase the volume level, press the VOL button. VOL will
appear and the volume level will be shown on the display panel
from a minimum of V -- 0 to a maximum of V -- 46. To decrease
the volume level, press the VOL button. The display will
automatically return to the normal indication 5 seconds after the
last volume adjustment or when another function is activated.
This control is also used in conjunction with the S el ect (SEL/ )
control button 3 to adjust the bass, treble, balance and fader
levels as described in 4, 5, 6 and 7.
3 SEL/ (S) CONTROL BUTTON
This button is used to select the audio function (volume, bass,
treble, balance, or fade) whose setting is adjusted using the
VOL / 2 buttons. Pressing the button will select volume
adjustment (VOL), treble adjustment (TRE will appear on the
display), bass adjustment (BAS on the display panel), balance
(BAL), or fader (FAD). The display will automatically return to
the normal indication 5 seconds after the last adjustment or when
another function is activated. The audio function last selected
will have priority and will appear whenever the S button is pressed
at a later time.
-3-
Pressing and holding this button enables/disables the beep tone
function. When the function is enabled the ( ) icon will appear
on the display. Each time a front panel key is pressed a beep
tone will sound.
4 TREBLE CONTROL
T o adjust the treble level, first select the T reble mode by pressing
the S button 3 so the TRE indication appears on the display
panel. Within 5 seconds of choosing the Treble mode, press the
VOL button 2 to decrease the treble response or the VOL
button to increase it as desired. The level will be shown on the
display panel from a minimum - 7 to a maximum of + 7 (0 indicates
flat response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
5 BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
the S button 3 so the BAS indication appears on the display
panel.
Within 5 seconds of choosing the Bass mode, press the VOL
button 2 to decrease the bass response or the VOL button to
increase it as desired. The level will be shown on the display
panel from a minimum - 7 to a maximum of + 7 ( 0 indicates flat
response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the S button 3 so the BAL indication appears
on the display panel. Within 5 seconds of choosing the Balance
mode, press the VOL button 2 to adjust the stereo balance to
the left channel speakers or the VOL button to adjust it to the
right channel speakers. The balance position will be shown on
the display panel from L 15 (full left) to R 15 (full right). When
the volume level between the left and right speakers is equal, 0
will be shown on the display panel. The display will automatically
return to the normal indication 5 seconds after the last
adjustment or when another function is activated.
7 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader
mode by pressing the S button 3 so the FAD indication appears
on the display panel. Within 5 seconds of choosing the Fader
mode, press the VOL button 2 to adjust the front-rear speaker
balance to the front speakers or the VOL button to adjust it to
the rear speakers. The fader position will be shown on the display
panel from R 15 (full rear) to F 15 (full front). When the level
between the front and rear speakers is equal, 0 will be shown on
the display panel. The display will automatically return to the
normal indication 5 seconds after the last adjustment or when
another function is activated.
8 LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this feature will
boost the bass and treble ranges to compensate for the
-4-
characteristics of human hearing. Press the LOUD button
momentarily to activate this feature and the indication LOUD will
appear on the display panel. Pressing the button again
momentarily will deactivate the feature (the LOUD indication will
disappear from the display panel).
9 AM/FM BAND SELECTOR (BAND)
During radio operation, each time this button is pressed, the radio
band is changed. The indication AM 1, AM 2, FM 1, FM 2 or
FM 3 will appear on the display panel according to your selection.
During disc play, pressing this button will stop play of the disc
and switch to radio operation. The disc will remain in the machine
without being ejected. During this time, the icon will remain
lit on the display panel to show that a disc is still loaded in the
unit. Press the MODE button to return to disc play from the
beginning of the last track in play .
When FM reception is weak and/or AM 1 or AM 2 is selected, the
stereo ( ) indication will disappear from the display .
bl MANUAL UP/DOWN TUNING, TRACK SELECT, AND
AUTOMATIC SEEK TUNING ( / )
To manually select a radio station, momematrily press the Up
Tuning ( ) side of the button to advance the unit two digits
higher or the Down Tuning ( ) side of the button to tune two
digits lower.
Pressing either side of the button for longer than 0.5 second and
then releasing will activate the Automatic Seek Tuning function.
The radio will seek the next station in the selected direction and
stop and remain at that frequency .
Pressing and holding either side of the button for longer than 0.5
second will cause the radio to continue tuning rapidly in the
selected direction until the desired station is reached. Tuning in
the same direction will continue unless the button is released at
the desired station. Pressing either side of the button during
disc play permits rapid selection of a desired track on the disc in
the respective direction.
bm MUTE (M) SELECTION
Press the M (MUTE) button momentarily to mute the volume
from the system (MUTE will appear on the display panel).
Pressing the button again, or selecting another function, will return
to the volume level setting in use before the MUTE function was
activated.
bn MONO/STEREO SELECTION
During FM radio operation, when the signal is broadcast in
stereo, the stereo mode is indicated by the icon on the
display panel. If the stereo signal is too noisy for comfortable
listening, or if the FM signal is broadcast in monaural instead of
stereo, the indication disappears from the display. When a
station on either AM band is selected, no stereo indication is
present on the display.
bo PRE-SET SCAN (PS) / AUTO-STORE TUNING (AS)
Press this button momentarily to scan the stations pre-set into
each AM band and each FM band. The unit will stop at each
pre-set station for approximately 8 seconds before continuing to
the next pre-set station (the pre-set station number on the display
-5-
Loading...