2002 Audiovox Communications Corp. • Printed in Japan • 03/02
AUDIOVOX
AUDIOVOX
CDM-9150X
CDM-9150X
Tri-Mode CDMA/AMPS
Handheld Portable
Cellular Telephone
In today’s fast paced world, it has become a necessity
to have access to real-time information. Your communications tools must provide you with this access from
anywhere at anytime. With that in mind, Audiovox developed the CDM-9150X, our first 1X capable tri-mode
handset with web browsing and voice activated dialing
features.
This 1X digital handset enables carriers supporting 1X
technology to provide consumers with access to high
speed connectivity for web browsing, email and mobile
ecommerce. Operating on the 800 MHz Amps/CDMA
and 1900 MHz PCS frequencies, the CDM-9150X allows for seamless nationwide coverage as well as offering other state-of-the-art, user-friendly features. V oice
activated dialing and two-way speakerphone are great
®
for enhancing hands-free use of this phone. T9
Input, vibrating alert and a 7-line LCD Display with adjustable text size make the CDM-9150X easier to use.
The CDM-9150X also has user changeable faceplates,
enabling you to e xpress y our individuality through your
wireless handset.
Text
Several optional accessories are av ailable f or the CDM9150X, including: hands-free de vices, charging devices
(vehicle, travel, desktop, A C), data interface cable, belt
clip, and of course, color user changeable faceplates.
Y our ne w CDM-9150X provides you with something only
an Audiovox phone can: the proven reliability that has
made us a leading wireless handset provider. Please
take a few moments to read the following pages of the
owner’s operating manual. It will help you make the
most efficient use of this valuable communications tool.
WARNING : Always read and understand all of the
Warnings and Safety Instructions contained in this
Manual before attempting to use this Audiovox CDM9150X Cellular Phone, to help avoid potential hazards
that could result in bodily injury or property damage.
Always keep this Manual conveniently available for future reference, as it contains important information that
will help effect the safe operation and maintenance of
this instrument.
The safety instructions have been classified according
to the seriousness of the risk, as follows :
DANGER : “Danger” indicates the existence of a
hazard that could result in death or catastrophic
bodily injury, if the safety instruction is not observed.
WARNING : “Warning” indicates the existence of
a hazard that could result in serious bodily injury, if
the safety instruction is not observed.
CAUTION : “Caution” indicates the existence of a
hazard that could result in minor bodily injury or
property damage, if the safety instruction is not
observed.
NOTICE : “Notice” contains general information
that relates to the safe operation of the telephone.
7
Safe Operation of Your Phone
WARNING
Never attempt to disassemble the phone or any of
•
its accessories. If service or repair is required, return the unit to an Audiovo x authorized service center. If the unit should be disassembled, a risk of electric shock or fire may result.
Always use authorized Audio vox accessories and op-
•
tional devices when operating this cellular phone, as
the use of incompatible auxiliary equipment could
result in fire, electric shock or other bodily injury . The
use of unauthorized accessories will also void your
Warranty.
Protection of Children
Never allow children to pla y with your phone, as the y
•
might hurt themselves or others (e.g., by poking
themselves or others in the eye with the antenna).
Always keep all accessories and components out of
•
the reach of small children. Small parts, in particular, might present a choking hazard to children.
Use in Vehicles
Never store or transport flammable liquids, gases or
•
explosive materials in the same compartment as the
phone or any of its accessories, as possible sparking in the equipment could ignite a fire or explosion.
Always secure the phone in its holder , when it is not
•
in use. Ne ver place the phone on the passenger seat
or anyplace else in the car where it can become a
projectile during a collision or sudden stop.
8
Safe Operation of Your Phone (continued)
CAUTION
Never e xpose this phone to high temperatures, such
•
as those found near a heater or in a closed car parked
in the sun. This can cause heat-damage to the plastic parts, the electronic components and the battery.
Never drop this phone or subject it to violent impact
•
or shock. This can cause mechanical damage.
Never allow any liquids to spill on this phone or ex-
•
pose it to rain, water or moisture. This can cause
corrosion damage.
Never store this phone in cold areas. When the phone
•
warms up (to its normal operating temperature),
moisture can form inside the phone, which may damage the phone’s electronic circuit board.
Never use harsh chemicals, cleaning solvents, or
•
strong detergents to clean this phone. Always clean
it with a soft cloth that has been slightly dampened
in a mild soap-and-water solution.
Never paint this phone. This can clog the moving
•
parts.
Before connecting this cellular phone or any of its accessories to any other device, alwa ys read the Instruction Manual for that other device first to obtain detailed
safety instructions. Nev er connect this cellular phone to
any unauthorized or incompatible auxiliary product that
has not been expressly approved by Audiovox.
9
Safe Operation of Battery Pack
WARNING
Never short-circuit a battery pack by either acciden-
•
tally or intentionally bringing the terminals in contact
with another metal object. That could result in b urns,
other bodily injury or a fire, and could also damage
the battery pack.
Never expose the terminals of the battery pack to
•
any other metal object. Alwa ys wrap it or place it in a
plastic bag, whenever transporting it.
Never heat and never attempt to disassemble the
•
battery pack, as that could cause leakage of the caustic electrolyte. If the battery is accidentally broken,
avoid skin contact with the contents. In the event of
skin contact, wash the affected area immediately and
obtain prompt medical attention.
Never attempt to dispose of a battery pack by thro w-
•
ing it into a fire. That can cause the batter y pack to
explode.
Never attempt to use an unauthorized battery pack
•
with your phone in order to avoid any risk of bodily
injury or property damage. Since unauthorized accessories have different specifications, they may be
incompatible with your phone.
10
Safe Operation of Battery Pack (continued)
WARNING
Safe Disposal of Used Battery Packs
Never discard a used battery pack with ordinary solid
•
wastes, since it contains toxic substances.
Always dispose of a used battery pack in accordance
•
with prevailing community regulations relating to the
disposal of household toxic wastes. Alwa ys cov er the
metal terminals with insulating tape first, to prevent
accidental short-circuiting.
CAUTION
RBRC
Always turn your phone OFF before removing the
•
battery pack, and always use the battery pack for its
intended purpose only.
Always use the battery pack supplied by Audiovox,
•
or an approved replacement battery pack, to avoid
any risk of damage to your cellular phone.
11
Safe Operation of AC Adapter
The AC Adapter and the Desktop Charger that were
designed by Audiovox for this unit both require the use
of a standard 120 V A C power source f or their operation.
DANGER
Never attempt to disassemble or repair an AC adapter
•
or desktop charger, as e xposure to electric shock hazards may result. Always contact an A udiov ox authorized
service center, if repair or replacement is required.
Never alter the AC cord or plug on your AC adapter
•
or desktop charger. If the plug will not fit into the av ailable outlet, have a proper outlet installed b y a qualified electrician. Improper connection can result in the
risk of electric shock.
WARNING
Never allow any liquids or water to spill on the AC
•
adapter or desktop charger when it is connected to
an AC power source. There is a risk of fire or electric
shock.
Always use the authorized Audiovox AC adapter or
•
desktop charger to avoid any risk of fire or damage
to your cellular phone or battery . Bodily injury or property damage may occur as a result of the use of an
unauthorized and incompatible AC adapter or desktop charger.
Never use an A C adapter or desktop charger if it has
•
a damaged or worn power cord or plug. The use of
damaged or worn power cords or plugs could result
in electric shock, burns or fire. Contact an Audiovox
authorized service center immediately to obtain a
suitable replacement.
12
Safe Operation of AC Adapter (continued)
WARNING
Always unplug the AC adapter or desktop charger
•
from the power source before attempting any cleaning in order to avoid the risk of electric shock. Always use a soft cloth dampened with water to clean
the equipment, after it has been unplugged.
Never attempt to use an unauthorized A C adapter or
•
desktop charger with your phone in order to avoid
any risk of bodily injury or property damage. Since
unauthorized accessories have different specifications, they may be incompatible with your phone.
CAUTION
Always confirm that the power cord for any acces-
•
sory is located so that it will not be stepped on, tripped
over, or otherwise subjected to damage or stress.
Never place heavy objects on a power cord, as this
•
could result in damage to the cord.
Never bend or twist a power cord, and never pull on
•
a power cord in a attempt to remove an AC adapter
or accessory plug from a socket. Always grasp the
AC adapter or the accessory plug directly when unplugging the device in order to avoid damaging the
cord.
Always disconnect the A C adapter or desktop charger
•
from the power source when it is not in use.
13
SAFETY INFORMATION FOR
SAFETY INFORMATION FOR
WIRELESS HANDHELD PHONES
WIRELESS HANDHELD PHONES
Read this information before using your handheld
portable Cellular Telephone.
Your wireless handheld portable telephone is a low
power radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF) signals.
FCC RF EXPOSURE INFORMATION
In August 1996, the Federal Comm unications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety
standard for human exposure to radio frequency (RF)
electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the saf ety
standard previously set by both U.S. and international
standards bodies. The design of this phone complies
with the FCC guidelines and these international standards.
Use only the supplied or an approved antenna. Unauthorized antennas, damaged antennas, modifications,
or attachments could impair call quality, damage the
phone, or result in violation of FCC regulations. Please
contact your local dealer for replacement antenna.
Body-worn Operation
This device was tested f or typical body-worn operations
with the BC-9100 belt-clip and LB-9100 holster models, offered by A udiov o x as an accessory to this phone,
and found to comply with FCC RF exposure requirements. Third-party belt-clips, holsters and similar accessories should be avoided, as they have not been
tested and may not comply with FCC RF exposure limits.
For more information about RF exposure, please visit
the FCC website at
www.fcc.gov .
PHONE OPERATION
Normal position: Hold the phone as you would any
other telephone with the antenna pointed up and over
your shoulder.
14
Tips on Efficient Operation:
For your phone to operate most efficiently:
• Extend your antenna fully.
• Do not touch the antenna unnecessarily when the
phone is in use. Contact with the antenna aff ects call
quality and may cause the phone to operate at a
higher power level than otherwise needed.
DRIVING
Check the laws and regulations on the use of wireless
telephones in the areas where you drive. Always obey
them. Also, if using your phone while driving, please:
• Give full attention to driving — driving safely is your
first responsibility.
• Use hands-free operation, if available.
• Pull off the road and park before making or answering a call if driving conditions so require.
ELECTRONIC DEVICES
Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be
shielded against the RF signals from your wireless phone.
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches be
maintained between a handheld wireless phone and a
pacemaker to avoid potential interf erence with the pacemaker. These recommendations are consistent with the
independent research by and recommendations of Wireless T echnology Research.
Persons with pacemakers:
Should AL W AYS keep the phone more than six
(6”) inches from their pacemaker when the
phone is turned ON.
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to
minimize the potential for interference.
If you have an y reason to suspect that interfer-
ence is taking place, turn your phone OFF im-
mediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the e vent of such interf erence, you ma y
want to consult your service provider [or call the customer service line to discuss alternatives].
15
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician
may be able to assist you in obtaining this information.
Turn your phone OFF in health care facilities when an y
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Tur n your phone OFF in any facility where posted notices so require.
AIRCRAFT
FCC regulations prohibit using your phone while in the
air. Switch OFF y our phone bef ore boarding an aircraft.
BLASTING AREAS
To avoid interfering with blasting operations, turn your
phone OFF when in a “Blasting area” or in areas posted
“T urn off two-wa y radio”. Obey all signs and instructions.
POTENTIALLY EXPLOSIVE ATMOSPHERES
Tur n your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an e xplosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always mark ed clearly. Potential areas ma y
include: fueling areas (such as gasoline stations); below deck on boats; fuel or chemical transfer or storage
facilities; vehicles using liquefied petroleum gas (such
as propane or butane); areas where the air contains
chemicals or particles (such as grain, dust, or metal
powders); and any other area where you would normally
be advised to turn off your vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless
equipment, in the area over the air bag or in the air bag
deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.
16
SAR INFORMATION
SAR INFORMATION
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
The guidelines are based on standards that were developed
by independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of
all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for
SAR are conducted with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below
the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer y ou are to
a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions
and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR v alue for
this model phone when tested for use at the ear is 1.49 W/kg
and when worn on the body, as described in this user guide,
is 1.25 W/kg. (Body-worn measurements differ among phone
models, depending upon available accessories and FCC requirements). While there may be diff erences between the SAR
levels of various phones and at v arious positions, they all meet
the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be
found under the Display Grant section of http://www.fcc.gov/
oet/fccid after searching on FCC ID CJ6DCE44941A.
Additional information on Specific Absorption Rates (SAR) can
be found on the Cellular Telecommunications & Internet Association (CTIA) web-site at http://phonefacts.net.
In the United States and Canada, the SAR limit for mobile
*
phones used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection f or the
public and to account for any variations in measurements.
17
SYSTEM CONFIGURATIONSYSTEM CONFIGURATION
System configuration and the equipment list are as
shown below.
Retractable
Whip Antenna
1
Handheld Portable
Telephone
2
Lithium Ion
Battery Pack
List of Equipment
No.
1
Handheld Portable Telephone
2
Lithium Ion Battery Pack (BTR-9100)
3
AC Adapter (CNR-9100)
Name of the Equipment
18
3
AC Adapter
BATTERY INSTALLATION
BATTERY INSTALLATION
AND RECHARGING
AND RECHARGING
To Attach the Battery Pack
1. Press and slide the battery cover to remove it.
2. Place the BTR-9100 battery pack in the battery
cavity so that it fits over
the connector.
Connector
3. Slide the cover back to
snap it on.
To Detach the Battery Pack
1. Press and hold key to
turn the phone off. Then
press and slide the battery cover to remove it.
2. Lift the battery pack up to
take it out.
19
To Recharge the Battery
Your CDM-9150X phone has a built-in charger function. To recharge the Battery Pack, always insert the
Battery Pack into the phone’s battery cavity.
1. Insert the BTR-9100 Battery Pack into the phone’ s
battery cavity.
2. If the phone is on with the
press and hold
to turn the phone off.
3. Insert the flat connector end of the CNR-9100 AC
Adapter into the connector port on the bottom of
the phone.
4. Plug the AC Adapter to AC120V outlet.
5. Recharging will begin. The display will read “NowCharging” with animation and the
will scroll in the upper right
corner of the display. Also,
the Charging Indicator at the
top of the phone will light
green.
6. When recharging is completed, the phone displays
“Fully Charged!”.
7. Disconnect the AC Adapter from the outlet.
8. Press and hold in the buttons on the flat connector of the AC Adapter and pull the connector awa y
from the phone.
indicator displayed,
indicator
Now Charging
The recharging time, from empty to full, depends on
the environmental temperature, 0 to +35 °C.
Battery Type
Lithium Ion Battery Pack (BTR-9100)
Notes: 1. For complete recharging, it is recommended that
the phone be turned off during recharging.
2. It is normal for the battery to become a little warmer
during recharging.
3. Do not feed power to the phone without the battery
pack attached.
CDM-9150X
Buttons to unlatch
Recharging Time
1.5 to 2 h
AC120V
AC Adapter
CNR-9100
20
To Recharge with Desktop Holder
You can also recharge the phone using the CNR-9100
AC Adapter and the optional accessory DTH-9100
Desktop Holder as illustrated below.
CDM-9150X
Desktop Holder
DTH-9100
(Option)
AC120V
AC Adapter
CNR-9100
Battery Information
Temperature extremes will affect the ability of your
•
Battery Pack to charge; alw ays allow it to cool down
or warm up first. Never attempt to charge the Battery Pack if the ambient room temperature is below
32°F (0°C) or above 105°F (40°C).
Subjecting the Battery Pack to extremely high or lo w
•
temperatures will reduce its capacity and its life expectancy. Always try to keep the Battery Pack between 59°F and 77°F (15°C and 25°C), if possible.
21
FUNCTIONSFUNCTIONS
External View
Retractable
Whip Antenna
Power
Indicator
Receiving
Signal
Strength
Indicator
Digital
Mode
Indicator
Earpiece
IN USE
Indicator
Roaming
Indicator
Message
Indicator
Vibrating
Indicator
Battery Level
Indicator
Soft Key 1
Send Key
Message
Access Key
Voice Mail &
Speakerphone
One-Touch
Emergency Key
Digit Keys
Vibrating &
Shift Key
Next Key
Power/Data
Connector
Rm
ABCDEFGHIJKL
MNOPQRSTUVWX
YZ1234567890
Rc
l
F
V
1
GHI
4
PQRS
7
CLR
DEF
ABC
3
2
MNO
JKL
6
5
WXYZ
TUV
9
8
0
Incoming Call
& Charging
Indicator (LED)
Earphone
Mic Jack
Graphic
Display
Soft Key 2
End Key with
Power On/Off
Multi Function
Key
Up-arrow
Recall
Function
Down-arrow
Clear Key
Voice Activated
Dialing &
Space Key
Microphone
22
Function of Keys
Digit Keys
1
ABC
2
GHI
4
JKL
5
PQRS
7
TUV
8
0
Function Keys
To enter Telephone Numbers.
DEF
3
To enter letters and symbols (see
MNO
6
page 32).
WXYZ
9
Emergency feature.
1
is also used for One-Touch
Rc
l
F
V
Soft Keys. To function as shown in the
bottom line on the display.
SEND Key. To originate or answer a call.
END Key. To terminate a call and to turn
the phone ON/OFF.
To recall phone numbers from memory.
Rc
l
Also used as left-arrow key.
To be used with other keys to activate
F
Key- Board Arrangement
various special features. Also used as
right-arrow key.
To control the volume of Ringer, Key Tone
and Earpiece/Speakerphone.
Also used as up/down-arrow keys.
To access your Voice Mail with only one
V
key (see page 62) and to activate Speakerphone mode (see page 29).
To review Text Messages or to learn how
many Voice Messages are in your Voice
Mailbox (see page 57).
To clear digits from the display or from a
CLR
memory location.
LCD Display Indication
ItemsDescriptions
Receiving Signal Strength Indicator.
The number of lines indicates the received
Signal Strength, and is also used as a
POWER ON Indicator.
Digital Mode Indicator. To indicate the
phone is operating in digital mode.
A call is in progress.
The phone is out of Service Area.
Rm
ABCDEFGHIJKL
MNOPQRSTUVWX
YZ1234567890
The phone is out of the Home Area.
Message Indicator. To indicate that new
Text Messages are stored in memory or new
Voice Messages are in your Voice Mailbox.
Vibrating Indicator. To indicate that the
vibrating alert is active.
Battery Level Indicator.
Monitors the battery charge condition.
Graphic full-dot matrix display with flexible
font size in 3 to 7 lines.
23
CLR
GETTING STARTEDGETTING STARTED
Turning the Phone On/Off
Press and hold . All the indicators and the display
will light momentarily, and a tone will be heard. The
indicator will be displayed while the phone is on.
To turn the phone off, press and hold .
Antenna Position
The antenna can be used in its fully extended or fully retracted position only. It is recommended that the antenna
should be fully extended for optimum performance and
signal strength or while operating in poor signal areas.
Receiving Signal Strength Indicator
The number of lines shown by this icon indicates the
strength of the signal your phone is receiving. Four lines
indicates maximum signal strength. The number of lines
may change as you move with the phone to represent
the changing signal strength. If the signal is not strong
enough to place a call, “
” will appear on the display.
()
Battery Level Indicator
You can always monitor the battery charge condition
with the constant battery level indicator . The number of
blocks indicates the battery conditions as follows:
Full charge
Low charge
Flashing indicates discharged.
Power Management
Battery
Lithium Ion
(BTR-9100)
The operating times are approximate values and may
vary depending on network configuration and handset
usage.
Mode
Digital 1x
Digital
Analog
Talk Time
up to
135 min.
170 min.
60 min.
Standby Time
up to
270 h
150 h
15 h
24
BASIC OPERATIONBASIC OPERATION
Placing Calls
To Place a Call
1. Enter the phone number.
(A maximum of 32 digits will
be displayed.)
2. Press
The
.
indicator will appear
on the display.
• To Correct a Number
CLR
Press
Press and hold
•
If the Call Fails to Go Through
to clear the last digit.
CLR
to erase all the digits entered.
Press and to redial the number.
To Terminate a Call
Press . The indicator will no longer appear in the
display.
123-456-7890
Calling...
MenuSTO
123-456-7890
Last Number Redial
1. Press the key under
Redial
, or press
recall the last number dialed.
2. Press
to place the call.
See Call History on page 54 for details. See also Re-dial Soft Key (F04) on page 90.
Rcl
to
To Dial the Last Number Received
Rcl
Press
you received, then press
to recall the last number with Caller ID
.
See Call History on page 54 for details.
Phonebook Dialing
Press
number from your phonebook, then press
See Phonebook Recall on page 43 for details.
Tip:The V key will be used for Voice Mail access. See
Tip:Press and hold for Voice Activated Dialing. See
Rcl
and enter an address (01 to 99) to recall a
page 62.
page 53.
.
25
Speed Dialing
If you know the phonebook address of the telephone
number that you want to call, you ma y place a call with-
Rcl
out using
.
1. Enter the one or two digits of your Phonebook address (1 to 9 or 10 to 99).
2. Press
The
. The phone number will be displayed.
indicator will be displayed and the call will
be placed.
Note: If two telephone numbers are stored in the address,
the Primary Number will be dialed.
Quick Dialing
When this feature is on, the Primary number in your
Phonebook address 02 to 09 can be dialed with just
one push of the key. See Quick Dialing (F01) on page
90 to turn this feature on/off.
ABC
1. Press a digit key (
2
second.
2. The number in your phonebook is automatically
dialed. The phone number will be displayed. The
indicator will light.
Note: The key 1 is not for Quick Dialing, but for One-
Touch Emergency Call, page 27.
WXYZ
9
to
) for more than one
Emergency Call
This feature permits you to place an emergency call ev en
if your telephone is in “Phone Lock”, “Keypad Lock” or
“Restrict” mode. Up to 3 numbers can be programmed as
Emergency numbers. The emergency numbers “91 1” and
911” are already preprogrammed. See To Change
“
Emergency Numbers (F62) on page 85.
Example: To Call 911 in “Phone Lock” or “Key-
pad Lock” mode.
WXYZ
9
1. Enter
played.
2. Press
The “911” will be displayed.
The
and the call will be placed.
1 1. The “911” will not be dis-
.
Calling...
indicator will light,
Emergency
26
911
One-Touch Emergency Call
This feature permits you to dial an emergency number
by a single key stroke, even in the “Phone Lock” or
“Restrict” mode. This feature can be turned off to pre-
vent unintentional calls to the emergency number.
See T o Turn On/Off One-Touch Emergency Call Fea-ture (F63) on page 85.
1
1. Press and hold
number in emergency memory location “1” will be
dialed.
2. Then the
call will be placed. (The factory preset number is
“911”.)
Note: This feature cannot be used if the Keypad Lock is on.
You need to dial all the digits and .
for more than 2 seconds. The
indicator will be displayed and the
Emergency Call Mode
When you dial one of the 3 preprogrammed emergency
numbers, your phone will enter the Emergency CallMode. In this mode, the phone will attempt to complete
the emergency call using any availab le cellular system
from which it can obtain service.
After it places an emergency call, the phone will stay in
the Emergency Call Mode, and will display “Emer-
gency Call Mode, END to exit”. In the Emergency Call
Mode, the phone will attempt to continue to receive
service from the Cellular system that it used to complete the call. The phone will automatically exit the
Emergency Call Mode after 5 minutes or after you
press
.
Receiving Calls
The phone sounds an alert or vibrates to alert you of
an incoming call. Also , the LED on the top of the phone
will flash.
To Receive a Call
When the telephone rings, press to answer the call.
indicator will be displayed.
The
Note: To mute the ringer or stop the vibrating, press .
Any Key Answering
This feature permits you to answer an incoming call by
pressing any key on the k e y pad except
27
and
Rcl F
.
Caller ID with Name
This feature allows you to preview in your display the
number and name of the party calling you before you
answer the call. The name is as you programmed it in
your phonebook.
1. When the phone rings, the
Incoming Call
Calling Number appears in
the display.
JACK
123-456-7890
2. The last 10 Caller IDs are stored in the memory
for your review and redial. See Call History on
page 54 for details.
Note: “Number Restricted” or “Number Unavailable” is dis-
played when the Caller ID is restricted or not availab le.
Automatic Calls-in-Absence Indicator
This feature indicates the number of unansw ered incoming calls. The display indicates “Called XX”, the num-
ber of calls (01 to 99) you missed and the LED will blink.
It also indicates the caller number and name of the latest
Refer
call, if available. Press the key under
coming Call History.
Depressing any key will clear the
display. See Redial Soft Key(F04) on page 90.
Called 12
May 21 10:25 am
JACK
Refer
to view In-
123-456-7890
Ringing Tone with Melody
The CDM-9150X offers you 15 styles of ringer tones and
melodies for alerting incoming calls. Ringer v olume can
also be adjusted. See Ringer Type Selection (F32) on
page 75 and Ringer Volume Control (F31) on page 75
for setting. See also Vibrating Alert (F8) on page 89.
Distinctive Ringing (Audible Caller ID)
You may program different ringer styles for different
phonebook addresses. See To Store a Ringer Type
with the Phone Number on page 40 for setting.
During Calls
To Adjust the Earpiece Volume
Simply press or to adjust Earpiece/Speakerphone
Volume during a call.
28
Ear/SPK Vol.
To Mute a Phone Conversation
There are two ways to mute the microphone during a
call.
Mute
1. Press the key under
, or press F F.
2. Then the screen displays “Phone is muted!”.
3. To retur n to normal mode, press the key under
Unmute
, or press F F again.
Note: Terminating a call cancels the muting.
Speakerphone Mode (Two-Way)
This feature allows you to engage in a con versation without having to hold the phone.
V
1. To activate this feature, press
during a call.
The screen displays “Speaker ON!”.
2. Press
or to adjust the earpiece/speak-
erphone volume.
V
3. To retur n to normal mode, press
Notes: 1. T erminating a call cancels the speakerphone mode.
2. It is not recommended to use this feature in a noisy
environment.
again.
Automatic Talk Timer
The talk time of the current call will be automatically
displayed. For example, “1H 23M 45S”.
Scratch Pad Dialing
If you enter a telephone number during a call, the number will be stored in the Scratch Pad memory.
After terminating the call, the number you entered can
be dialed by pressing
Note: You can deactivate “Sending DTMF” so that keypad
tones will not be transmitted to the calling party. See
Sending DTMF (F34)
.
on page 75.
Call Waiting
Your service provider may provide Call Waiting service.
When you are on a call, you may hear a beep tone alerting you of another incoming call.
Your phone displays “New Caller” and the new caller’s
name and number. The name is as you programmed it
in your phonebook.
1. Press
2. Press
to answer the new call.
again to switch between the two calls.
29
Three-Way Calling
Your service provider may provide Three-Way Calling
service. When a call is already in progress, you may
call the third party.
1. Enter a number and press
party.
2. Press
Ask your service provider for the detailed information.
again to connect all three parties.
to call the third
Standby
Indicators on Standby
Your phone displays date and
time, various settings status, and
soft keys in standby.
: See Service Mode (F71) on page 87.
: Ringer Volume is in Silent mode. See page 75.
: Automatic Answering is active. See page 90.
: Phone Lock is active. See page 72.
: Keypad Lock is active. See page 71.
: CountdownTimer is active. See page 80.
: Clock Alarm is active. See page 79.
Redial
: See Last Number Redial on page 25.
Web
: See Accessing Internet on page 65.
Note: For displaying date and time, see Clock Indicator (F42)
on page 78 and Clock Adjustment (F43) on page 79.
May 20 Mon
3 : 15 pm
RedialWeb
Vibrating Alert
To activate Vibrating Alert, press and hold . The
indicator will be displayed. To deactivate it, press
and hold
page 89.
again. See also V ibrating Alert (F8) on
Multilingual
Y our phone pro vides multiple languages (English, Spanish, French and Portuguese) for displaying the menus
and prompts in the Basic Operation, Phonebook Operation and Function Menu. See Language Selection(F24) on page 74.
30
Loading...
+ 77 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.