the most advanced cellular telephones in the market
today. Your new Audiovox portable telephone is a dual
mode cellular telephone operating in both the standard
analog and the CDMA “digital” modes.
CDMA technology is a superior digital technology that
greatly increases the quality and capacity of the cellular system and will provide you with enhanced features
and services. Among the many additional benefits y our
new Audiov ox portable phone will provide while oper ating in the digital mode are, superior voice quality, increased talk and standby times and enhanced privacy.
Your new Audiovox dual mode cellular telephone combines all the advantages of CDMA digital technology
along with Audiovo x innov ative engineering into a small,
attractive unit that is very easy to use.
The Audiovox CDM-4000/CDM-4000XL is packed with
advanced features that provide y ou with the ultimate in
convenience and perf ormance such as a full dot matrix
LCD display, 99 dual-number alpha numeric memory
locations, a user friendly multi-function key, as well as
a one touch voice mail access key.
Other feature highlights include one touch emergency
dialing, caller ID with name display, 10 number storage
each for incoming and outgoing calls, text messaging
and voice mail notification.
Optional accessories include an extended lithium ion
battery, a hands free car kit, a cigarette lighter charger
and an earphone/microphone. A leather carrying case
is also available.
And of course, your new Audiovox Dual Mode cellular
telephone comes with something only an Audiovox
phone can provide. The proven reliability that has made
Audiovox one of the world’s leading suppliers of cellular communications equipment.
Please take a few moments to read the f ollowing pages
of this user’s operation manual. It will help you make
the most efficient use of this valuable communications
tool.
You hav e just purchased one of
5
SAFETY INFORMATION FOR
SAFETY INFORMATION FOR
WIRELESS HANDHELD PHONES
WIRELESS HANDHELD PHONES
Read this information before using your
handheld portable Cellular Telephone.
EXPOSURE TO RADIO FREQUENCY SIGNALS
Your wireless handheld portable telephone is a low
power radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF) signals.
In August, 1996, the Feder al Communications Commission (FCC) adopted RF exposure guidelines with safety
levels for handheld wireless phones. Those guidelines
are consistent with the safety standards previously set
by both U.S. and international standards bodies:
ANSI C95.1 (1992)
*
NCRP Report 88 (1986)
*
ICNIRP (1996)
*
Those standards were based on comprehensive and
periodic evaluations of the rele vant scientific literature.
For example , over 120 scientists , engineers, and physicians from universities, government health agencies,
and industry reviewed the av ailable body of research to
develop the ANSI Standard (C95.1). The design of y our
phone complies with the FCC guidelines (and those
standards).
ANTENNA CARE
Use only the supplied or an approved replacement antenna. Unauthorized antennas , modifications, or attachments could damage the phone and may violate FCC
regulations.
PHONE OPERATION
Normal Position: Hold the phone as you would any
other telephone with the antenna pointed up and over
your shoulder.
The meanings of the acronyms are:
*
ANSI : American National Standards Institute
NCRP : National Council on Radiation Protection
and Measurements
ICNIRP: International Commission on Nonionizing
Radiation Protection
6
Tips on Efficient Operation:
For your phone to operate most efficiently:
• Extend your antenna fully.
• Do not touch the antenna unnecessarily when the
phone is in use. Contact with the antenna aff ects call
quality and may cause the phone to operate at a
higher power level than otherwise needed.
DRIVING
Check the laws and regulations on the use of wireless
telephones in the areas where you drive. Always obey
them. Also, if using your phone while driving, please:
• Give full attention to driving — driving safely is your
first responsibility.
• Use handsfree operation, if available.
• Pull off the road and park before making or answering a call if driving conditions so require.
ELECTRONIC DEVICES
Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be
shielded against the RF signals from your wireless phone.
Pacemakers
The health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches be
maintained between a handheld wireless phone and a
pacemaker to avoid potential interf erence with the pacemaker. These recommendations are consistent with the
independent research by and recommendations of Wireless Technology Research.
Persons with pacemakers:
Should AL W AYS keep the phone more than six
(6”) inches from their pacemaker when the
phone is turned ON.
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to
minimize the potential for interference.
If you have an y reason to suspect that interfer-
ence is taking place, turn your phone OFF im-
mediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the e vent of such interf erence, you ma y
want to consult your service provider [or call the customer service line to discuss alternatives.]
7
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician
may be able to assist you in obtaining this information.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle. You should also consult the manuf acturer of an y
equipment that has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted notices so require.
AIRCRAFT
FCC regulations prohibit using your phone while in the
air. Switch OFF y our phone bef ore boarding an aircraft.
BLASTING AREAS
To avoid interfering with blasting operations, turn your
phone OFF when in a “Blasting area” or in areas posted
“T urn off two-wa y radio”. Obey all signs and instructions.
POTENTIALLY EXPLOSIVE ATMOSPHERES
Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an e xplosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often but not always clearly marked. They include fueling
areas such as gasoline stations, below deck on boats,
fuel or chemical transfer or storage vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such
as: grain, dust, or metal powders, and any other area
where you would normally be advised to turn off your
vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects, including both installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment
is improperly installed and the air bag inflates, serious
injury could result.
8
PRECAUTIONSPRECAUTIONS
Your Handheld Portable Telephone is a high quality
piece of equipment. Before operating the equipment,
read all instructions and cautionary markings on (1) AC
Adapter, (2) Battery and (3) Product using Battery.
1. DO NOT use this equipment in an extreme
environment where high temperature or
high humidity exists.
2. DO NOT abuse the equipment. Avoid striking, shaking or shocking. When not using
the unit, lay down the unit to a void possible
damage due to instability.
3. DO NOT expose this equipment to rain or
spilled beverages.
4. DO NOT use unauthorized accessories.
5. DO NOT disassemble the phone or its accessories;If service or repair is required,
return the unit to an authorized Audiovox
cellular service center. If the unit is disassembled, the risk of electric shock or fire
may result.
6. To prevent injury or burns, DO NOT allow
metal objects to contact or short circuit the
battery terminals.
7. DO NOT open the battery case. If the battery is accidentally broken, a void skin contact with the internal chemical contents. If
there is skin contact, wash the affected area
immediately and seek medical advice.
8. DO NOT put the battery close to, nor dispose it into fire.
9. The product that you have purchased contains a rechargeable Battery. At the end of
its useful life, under various state and local
laws, it may be illegal to dispose of this
Battery into the municipal waste stream.
Check with your local solid waste officials
for proper disposal procedures in y our area.
9
SYSTEM CONFIGURATIONSYSTEM CONFIGURATION
System configuration and the equipment list are as
shown below.
Retractable
Whip Antenna
5
Wrist Strap
1
Handheld Portable
Telephone
2
Battery Pack
3
Desktop Holder
List of Equipment
No.
1
Handheld Portable Telephone
2
Slim Lithium Ion Battery Pack (BTR-4000)
3
Desktop Holder (DTH-4000)
4
AC Adapter (CNR-4000)
5
Wrist Strap
Name of the Equipment
10
4
AC Adapter
WRIST STRAP ATTACHMENTWRIST STRAP ATTACHMENT
Attach the wrist strap to the phone through the strap
1
hole as shown below
Then put the long loop through the smaller loop as
shown below
1
2
.
.
11
2
BATTERY INSTALLATION
BATTERY INSTALLATION
AND RECHARGING
AND RECHARGING
To Attach the Battery Pack
1
Insert the hook at the end of the Battery Pack into
the slot at the end of the phone.
2
Press the Battery Pack down to lock the Battery P ack
onto the phone.
2
1
To Detach the Battery Pack
1
Slide back the Release Latch as shown below.
2
Lift up to remove the Battery Pack from the phone
gently.
1
2
Release Latch
To Recharge Battery
Your CDM-4000 has a built-in charger function. To recharge the Battery Pack, alwa ys install the Battery Pack
to the Phone.
1. Attach the Battery Pack to the Phone.
2. Insert the DC plug of the AC Adapter (CNR-4000)
to the Desktop Holder (DTH-4000). Plug the AC
Adapter to AC outlet.
3. Place the Phone with Battery Pack into the Desktop Holder.
12
4. Then the recharging starts. The display indicates
“now charging” with animation. You can see a
battery level indicator scrolling at the upper-right of the
display.
5. For complete recharging, it
is recommended that the phone is turned off during recharging.
6. When the recharging is completed, the display
indicates “fully charged”.
7. It is normal that Battery Pack may become a little
warmer during recharging.
The recharging time, from empty to full, depends on
the environmental temperature, 0 to +35°C.
Battery Type
Slim Lithium Ion (BTR-4000)
Extended Lithium Ion (BTE-4000)
Recharging Time
1.5 to 2 h
2.5 to 3.5 h
Desktop Holder
AC Adapter
Alternatively you can recharge the Phone using AC
Adapter as illustrated below.
AC Adapter
Note: Do not f eed the pow er to the Phone without Bat-
tery Pack.
13
FUNCTIONSFUNCTIONS
External View
Retractable
Whip Antenna
Power
Indicator
Receiving
Signal
Strength
Indicator
Digital
Mode
Indicator
Incoming Call
Indicator
IN USE
Indicator
Roaming
Indicator
Message
Indicator
Battery Level
Indicator
Send Key
Store Key
Message
Access Key
OneTouch
Emergency Key
Digit Keys
DC
Power Jack
IN USE
Rm
STO
Rcl
13
2
GHI
46
5
PQRSWXYZ
79
8
0
F
ABC
JKL
TUV
OPER
CLR
V
DEF
MNO
Earpiece
Earphone
Mic Jack
Data
Connector
Graphic
Display
End Key with
Power On/Off
Clear Key
Voice Mail
Access Key
Multi Function
Key
Up-arrow
Recall
Function
Down-arrow
Microphone
14
Function of Keys
Digit Keys
13
GHI
46
PQRSWXYZ
79
Function Keys
Rcl
DEF
ABC
2
JKL
5
TUV
8
OPER
0
To enter Telephone Numbers, Names
or special characters (
MNO
Emergency feature.
SEND key. To originate or receive a Call.
END key. To terminate a Call and to tur n
the phone ON/OFF.
To recall phone numbers from memory.
Also used as Left-arrow key.
To be used with other keys to activate
F
various special features. Also used as
Right-arrow key.
1
or ).
is also used for OneTouch
STOCLR
Rcl
F
V
Key- Board Arrangement
To control Earpiece audio level, Alert Tone
and Key Tone.
Also used as Up/Down-arrow keys.
To store phone numbers in memory.
STO
To clear digits from the display or from a
CLR
memory location.
To review Text Messages or to learn how
many Voice Messages are in your Voice
Mailbox.
To access your Voice Mail with only one
V
key.
LCD Display Indication
ItemsDescriptions
Receiving Signal Strength Indicator.
The number of lines indicates the received
Signal Strength, and
POWER ON Indicator.
Digital Mode Indicator. To indicate the
phone is operating in digital mode.
IN USE
Rm
A Call is in progress.
The phone is out of the Home-Area.
Message Indicator. To indicate that Text
Messages are stored in memory or Voice
Messages are in your Voice Mailbox.
Battery Level Indicator.
Monitors the battery charge condition.
is also used as a
Graphic full-dot matrix display with flexible
font size in 2 to 4 lines.
15
GETTING STARTEDGETTING STARTED
Turning the Phone On/Off
Press for more than one second. All the indicators
and the digit display will light momentarily, and a tone will
be heard. The indicator
turned on.
To turn the phone off, press fo r more than one second.
Antenna Position
The antenna can be used in its fully extended or fully retracted position only. It is recommended that the antenna
should be fully extended for optimum performance and
signal strength or while operating in poor signal areas.
Receiving Signal Strength Indicator ()
The number of lines indicates the Signal Strength in
your area. Four lines sho w the maximum le v el. The display will vary as you move with the phone. If the signal
is not strong enough to place a call, “No Service” will
appear on the LCD display.
will stay while the phone is
Battery Level Indicator
You can always monitor the battery charge condition
with the constant battery level indicator . The number of
blocks indicates the battery conditions as follows:
Full charge
Low charge
Flashing indicates discharged.
Power Management
Battery
Slim Battery
(BTR-4000)
Extended
(BTE-4000)
The operating times are approximate values and may
vary depending on network configuration and handset
usage.
Mode
CDMA
Analog
CDMA
Analog
T alk Time
up to
190 min.
65 min.
380 min.
130 min.
16
Standby Time
up to
170 h
12 h
340 h
24 h
BASIC OPERATIONBASIC OPERATION
Placing Calls
To Place a Call
1. Enter the phone number.
(A maximum of 32 digits will
be displayed.)
2. Press
The
•
To Correct a Number
Press
Press and hold
•
If the Call Fails to Go Through
Press, and to redial the number.
.
IN USE
indicator will light.
to clear the last digit.
CLR
to erase all the digits entered.
CLR
IN USE
To Terminate a Call
Press . The
IN USE
indicator will go out.
Last Number Redial
Press
then press .
See Call History on page 40 for details.
Rcl
to recall the last number you dialed,
To Dial the Last Number Received
Press
you received, then press
See Call History on page 40 for details.
Rcl
to dial the last number with Caller ID
.
Phonebook Dialing
Press
number from your phonebook, then press .
See Phonebook Recall on page 31 for details.
Rcl
and enter an address (01 to 99) to recall a
To Mute a Phone Conversation
Press
during a call. “Mute” will be displayed.
To return to normal conversation, press
again.
FF
to mute your conv ersation at any time
17
FF
Speed Dialing
If you know the phonebook address of the telephone
number that you want to call, you ma y place a call with-
Rcl
out using
.
1. Enter the one or two digits of your Phonebook address (1 ~ 9 or 10 ~ 99).
2. Press
The
. The phone number will be displa yed.
IN USE
indicator will light, and the call will be
placed.
Note: If two telephone numbers are stored in the ad-
dress, the Primary Number will be dialed.
Quick Dialing
When this feature is on, the Primary number in your
Phonebook address 02 to 09 can be dialed with just
one push of the key. See Quick Dialing (F01) on page
67 to turn this feature on/off.
1. Press a digit ke y (
ABC
2
second.
2. The number in your phonebook is automatically
dialed. The phone number will be displayed. The
IN USE
indicator will light.
Note: The ke y 1 is not for Quick Dialing, but f or One
Touch Emergency Call, page 19.
to
WXYZ
) for more than one
9
Emergency Call
This feature permits you to place an emergency call ev en
if your telephone is in “Phone Lock”, “Keypad Lock” or
“Restrict” mode. Up to 3 numbers can be prog rammed as
Emergency numbers. The emergency numbers “911” and
911” are already preprogrammed. See To Change
“
Emergency Numbers (F62) on page 65.
Example: To Call 911 in “Phone Lock” or “Key-
pad Lock” mode.
1. Enter
WXYZ
11
9
played, but “Phone Lock” or “Keypad Lock” will
be displayed.
2. Press
.
The “911” will be displayed.
IN USE
The
indicator will light,
and the call will be placed.
. The “911” will not be dis-
IN USE
18
OneTouch Emergency Call
This feature permits you to dial an emergency number
by a single key stroke, even in the “Phone Lock” o r
“Restrict” mode. This feature can be turned off to pre-
vent unintentional calls to the emergency number.
See To Turn On/Off OneTouch Emergency Call Fea-ture (F63) on page 65.
1. Press and hold
number in emergency memory location “1” will be
dialed.
2. Then the
be placed. (The factory preset number is “911”.)
Note: This feature cannot be used if the Keypad Lock
is on. You need to dial all the digits and
IN USE
for more than 2 seconds. The
1
indicator will light, and the call will
.
Receiving Calls
To Receive a Call
When the telephone rings, press to answer the
call. The
IN USE
indicator will light.
Any Key Answering
This feature permits you to answer an incoming call by
pressing any key on the ke y pad e xcept and
Rcl F
Caller ID with Name
This feature allows you to preview in your display the
number and name of the party calling you before you
answer the call. The name is as you programmed it in
your phonebook.
1. When the phone rings, the
Calling Number appears
in the display.
2. The last 10 Caller IDs are stored in the memory
for your review and redial. See Call History on
page 40 for details.
Note: “Number Restricted” or “Number Unav ailable”
is displayed when the Caller ID is restricted or
not available.
.
19
Automatic Calls-in-Absence Indicator
This feature indicates the number of unanswered incoming calls. If incoming calls are not answered, the
LCD display will indicate “Called XX”. “XX” is the number of calls (01 to 99) missed.
Example:
Depressing any key will clear the number of calls indicated in the display.
Ringing Tone with Melody
The CDM-4000 offers you 15 styles of ringer tones and
melodies for alerting incoming calls. Ringer volume can
also be adjusted. See Ring Type Selection (F32) and
Alert T one Volume Control (F31) on page 54 for setting.
Distinctive Ringing (Audible Caller ID)
You may program different ringer styles for different
phonebook addresses. See T o Store a Ring T ype with
the Phone Number on page 29 for setting.
During Calls
To Adjust the Earpiece Volume
Simply press or to
adjust Earpiece Volume during
a call.
Scratch Pad Dialing
If you enter a telephone number during a call, the number will be stored in the Scratch Pad memory. After
terminating the call, the number you entered can be
dialed by
Note: You can deactivate “Sending DTMF” so that k ey-
pad tones will not be transmitted to the calling
party. See Sending DTMF (F35)
To Send Touch Tone™ Signals
When Sending DTMF (page 55) mode is on, the num-
bers will be sent in TouchTone™ signals during a call
as you press digit keys ,
and.
.
on page 55.
WXYZ
1
through
9
,
OPER
,
0
20
For more information, see End to End Signaling on
page 22.
Automatic T alk Timer
The talk time of the current call will be automatically
displayed.
Example:
Call Waiting
Your service provider may provide Call Waiting service.
When you are on a call, you may hear beep tone alerting you of another incoming call. Your phone displays
“New Caller” and the new caller’ s ID with the name.The
name is as you programmed it in your phonebook.
1. Press
2. Press again to s witch between the two calls.
to answer the new call.
Three-Way Calling
Your ser vice provider may provide Three-Way Calling
service. When a call is already in progress, you may
call the third party.
1. Enter a number and press
party.
2. Press
Ask your service provider for the detailed information.
again to connect all three parties.
to call the third
Standby
Clock Indicator (Digital Mode Only)
When the phone is in an area with digital service (Digital Mode), Date and Time are automatically displayed,
if this feature is enabled. See Cloc k Indicator (F42) on
page 58 to turn this feature on/off.
Example:
Notes: 1. During Digital Mode, the indicator lights.
2. During Analog Mode, or while “No Service”
is indicated, the time display is not availab le
even if this feature is enabled.
21
End to End Signaling
T o utiliz e certain phone services, such as accessing an
alternate long distance network, signaling a pager or
banking by phone etc., Touch Tone™ signaling is required. The following features will mak e it easy to send
frequently used Touch Tone™ signals. See Link Dial-
ing on page 38 for more information.
Touch Tone™ from Display
When Sending DTMF (page 55) mode is on, the num-
bers will be sent in TouchTone™ signals during a call
as you press digit keys. When Sending DTMF mode is
off, you can send TouchTone™ signals in the following
manner.
1. Enter the number .
F
2. Press
“TONE”.
and scroll to
F
3. Press
. The number in the display will be
sent in Touch Tone™ signals.
Touch Tone™ from Memory
Touch Tone™ signals can be sent from memory during
a call.
Rcl
1. Press
number you want to send
in Touch Tone™ signals.
2. Press
“TONE”.
3. Press
sent in Touch Tone™ signals.
, and recall the
F
and scroll to
F
. The number in the display will be
22
PHONEBOOK OPERATIONPHONEBOOK OPERATION
Your phone has an Enhanced Phonebook with 99 dualnumber memory addresses. At each address, you can
store up to two telephone numbers under one name.
This feature allows you to store, under one name, a
person’s home and office number, office and mobile
number, etc. Stored numbers can be easily recalled and
dialed by pressing
Secret for added privacy.
Number of Digits per Phonebook Address
Address
01 to 90
91 to 99
Note
Single Number or
Dual Numbers
Up to 32 digits
Up to 32 digits
Includes Dual Mark
and Manual Hyphens
Phonebook Entry
To program your phonebook, enter the infor mation in
the following order. You may skip “Name” and/or “Option”.
CLR
NumberNameOption Address
. Numbers can also be marked
Linked Numbers
Up to 40 digits
Up to 80 digits
Includes Link Marks
and Manual Hyphens
STOSTO
To Store a Number without Name
1. Press
2. Press
address (01 through 99).
Example: To store the phone number 1 2 3 4 5 6 7
1. Press
2. Enter
JKL
5
OPER
0
3. Press
4. Enter
, then enter the phone number.
CLR
STO STO
, then enter the desired memory
8 9 0 in address 07.
.
CLR
ABC3DEF4GHI
1
2
MNO
PQRS
6
7
WXYZ
TUV
9
8
.
STO STO
OPER7PQRS
0
.
.
23
Overwrite Warning
When you attempt to store a number in an address
where another number has been already stored, you
will have “OVERWRITE” warning.
Example: To store the number 9 8 7 6 5 4 3 2 1 0
in the address 07, where another number 1 2 3 4 5 6 7 8 9 0 is already stored.
1. Press
2. Enter
JKL
5
OPER
0
3. Press
.
CLR
WXYZ
9
8
GHI3DEF2ABC
4
.
STO STO
TUV
MNO
PQRS
6
7
1
.
4. Enter
OPER7PQRS
0
.
The already stored number
is displayed momentarily.
5. Two seconds later.
6. If you accept to overwrite, scroll to “YES” and
F
Press
.
7. If you do not want to overwrite, scroll to “NO”
F
and press
. The screen returns to the step
3 again.
Auto Hyphenation
With this feature on, hyphens are automatically inserted
when you enter telephone numbers and when you recall the numbers from the Phonebook. See Auto Hy-phenation (F23) on page 52 to activate or deactivate
this feature.
Length of Number
10 digits or less
11 to 21 digits
22 digits or more
Display Example
123-456-7890
1-234-567-89012
No hyphens
Note: When you manually insert hyphens, the “Auto
Hyphenation” feature will not work for that par-
ticular number.
24
Loading...
+ 55 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.