Audiovox CDI-100M Owner's Manual

CDI-100M

CD CHANGER CONTROLLER

OWNER'SOWNER'S

OWNER'SOWNER'S

OWNER'S
MANUALMANUAL

MANUALMANUAL

MANUAL

CDC-10R

WIRELESS REMOTE CONTROL (OPTIONAL)

CDI-100M

-1-

INTRODUCTION

The CDI-100M CD Changer Controller is designed to permit
operation of compatible SPS/Audiovox CD changers through
your car stereo system. Please check with your SPS/Audiovox
car stereo specialist for recommendations of the CD changer
models that will work with the CDI-100M. The specific details on
the handling of discs and the use of the CD magazine (loading,
removal, etc.) will be found within the Owner’s Manual of the
compatible changer.

Since the CDI-100M/CD changer system will operate through
your existing sound system, adjustment of the audio functions
(volume, tone, balance, etc.) is made by using the controls on
the car stereo. Control of disc play is by the CDI-100M mounted
in the dashboard, as well as by the optional CDC-10R wireless
remote control.

SETTING UP FOR OPERATION

Following the instructions in the owner’s manual of the compat­ible CD changer, load the desired number of discs into the CD
magazine and insert the magazine into the changer.

With the car stereo operating, turn on the CD changer system by
pressing the Play/Pause button 2on the CDI-100M. The display
panel will illuminate and play of the first disc in the magazine will
begin. Adjust the volume, tone, and balance to your taste by
using the controls on the car stereo.

When the last track on a disc has played, the unit will automati­cally advance to and begin play of the next disc in the magazine.
When the last track on the last disc in the magazine has been
played, the unit will automatically return to the first disc and
begin play again.

To return to radio or tape operation of the stereo system, press
the Power Off button 3 on the CDI-100M or the AM/FM or Tape
mode switch on the radio.

1 LCD DISPLAY

The LCD Display Panel will illuminate when the CD changer is
operating. Different symbols will appear depending on the
function and operation in use. Each display is explained in the
applicable function explanation below.

2 PLAY / PAUSE ( / )

Pressing this button turns on the CD changer system, illuminates
the LCD panel and begins play of disc #1 if a new CD magazine
has been loaded into the changer. If a magazine was already in
the changer, play will resume from the track on the disc previously
in play. Play of the disc is shown by the indication and the
rotating disc symbol on the LCD panel. Pressing the button again
will temporarily stop play of the disc. The pause indication will
be shown on the LCD panel and the disc symbol will stop rotating
and flash instead. Press the button again to resume play of the disc.

OPERATING INSTRUCTIONS

-2-

NOTE: If left in the PAUSE mode for 5 minutes, the unit will

automatically shut off.

3 POWER OFF SWITCH (OFF)

Press this button to turn the CD changer off and return to radio or
tape operation of the car stereo.

4 DISC SELECT ( )

Press the Disc Select button to select the desired disc for play as
shown on the LCD panel. The unit will automatically load the
selected disc and begin play. To advance to a higher number
disc, press the side of the button. To return to a lower
number, press the side.

CDI-100M