System 10K Modular Audio Amplifier Series
SYS10K
The ATI System 10,000 is the ideal unit for multiple distributions when it comes to stereo or mono amplifying, microphone amplifying, or headphone distribution. The SYS10K is perfect for any ballpark, museum, or large venue such as the United Nations where many of our SYS10K systems can be found. The rack mounts up to ten amplifier modules and two power supplies. Each plug-in module is supplied with it’s own applicable connector assembly, thereby allowing for ease of insertion and quick hot-swaps.
The system features headphone jacks on all modules to allow a quick signal check. The flexible design let’s you mix basic and metered modules in the same enclosure to optimize your system performance. All input, output, and power lines are fully by-passed. The double ground plane PC board shields with an additional top formed shield covering on each module, protecting low-level circuitry from direct pick-up. The distribution power regulation on each amplifier module minimizes localized heat build-up in the power supplies. The durable rack makes the SYS10K a well-rounded device that speaks for itself.
•Mix and Match
•Power Splitting Distribution Amplifier Modules
•Individual Output Distribution Amplifier Modules
•Independent Level Adjustments
•Master Gain Input Control
•Headphone Output
Models
MODULAR DISTRIBUTION AMPLIFIERS
•CDA100 - 1X6 Compression/DA Module
•DA100 - 1X6 DA Module
•DA200 - Dual 1X4 DA Module
•DA200S - 1x8 Distribution Amplifier Module
•IDA100-1 - 1x6 DA Module for - Transformer Output
•IDA100-2 - 1x6 Distribution Amplifier Module
•MDA100 - Metered 1x6 DA Module
•MIDA100-1 - Metered 1X6 DA Module - Transformer Output
•MIDA100-2 - Metered 1X6 DA Module
•SDA200 - Stereo 1X4 DA Module
•SMDA200 - Stereo Metered 1x4 DA Module
MODULAR ONE AMPLIFIER
•LA100-1 - 1CH Line Amplifier Module - Transformer Output
•LA100-2 - 1 CH Line Amplifier Module
•MLA100-1 - Metered 1 CH Line Amplifier Module - Transformer Output
•MLA100-2 - Metered 1 CH Line Amplifier Module