Audio Technica ATW-T6002 S User Manual
UHF SYNTHESIZED WIRELESS
TRANSMITTER
ATW-T6002 S
Thank you for purchasing the product.
Before using the product, take time to read this user manual
thoroughly and use the product correctly. Keep this user
manual handy together with the warranty so that it is always
available for reference.
User Manual
2
●
Simultaneous 31-band transmission
●
IR Link feature for easy transmitter conguration
●
UHF band transmitter for wireless systems resistant
to the effects of extraneous noise
●
Great for stage use in live concerts, events, and
the like
●
Employs PLL synthesizer method
●
Greater dynamic range and lower noise thanks
to a double compandor (voice compression/
expansion) system (PAT.)
●
Organic EL display for enhanced visibility
●
Specially designed high efciency antenna
Features
・・・・・・・・・・・・・・・・・・・・・・
2
Important information
・・・・・・・・・・・・・・
3
Notes on use
・・・・・・・・・・・・・・・・・・・
4
When using multiple wireless systems
・・・・・
4
About microphone units
・・・・・・・・・・・・・
4
Part names and functions
・・・・・・・・・・・・
5
How to replace microphone
・・・・・・・・・・・
6
How to insert batteries
・・・・・・・・・・・・・・
7
About display
・・・・・・・・・・・・・・・・・・・
8
About settings
・・・・・・・・・・・・・・・・・・・
9
Menu screen
・・・・・・・・・・・・・・・・・・・・・・・・・・
9
Transmission frequency setting
・・・・・・・・・・・・・・・
10
NAME setting
・・・・・・・・・・・・・・・・・・・・・・・・・
10
To correct characters
・・・・・・・・・・・・・・・・・・・・・
11
Transmission power setting
・・・・・・・・・・・・・・・・・・
11
Gain setting
・・・・・・・・・・・・・・・・・・・・・・・・・・
11
Key lock setting
・・・・・・・・・・・・・・・・・・・・・・・・
11
Lock code setting
・・・・・・・・・・・・・・・・・・・・・・・
12
Battery setting
・・・・・・・・・・・・・・・・・・・・・・・・・
12
Using the key lock function
・・・・・・・・・・・
13
Setting up the key lock function
・・・・・・・・・・・・・・・
13
Cancelling the key lock function
・・・・・・・・・・・・・・・
13
About IR link
・・・・・・・・・・・・・・・・・・・
13
Troubleshooting
・・・・・・・・・・・・・・・・・
14
Specications
・・・・・・・・・・・・・・・・・・
14
Contents
Features
3
Warning:
To prevent fire or shock hazard, do not expose this apparatus to rain or
moisture.
Caution:
Do not expose this apparatus to drips or splashes.
To avoid electric shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not expose this apparatus to excessive heat such as sunshine, fire
or the like.
Do not subject this apparatus to strong impact.
FCC Notice
Warning:
Changes or modifications not expressly approved in writing by AudioTechnica may void the user’s authority to operate this equipment.
RF Exposure Statement:
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter used in other systems.
No userserviceable parts inside. The circuits inside the chassis,
transmitters have been precisely adjusted for optimum performance
and compliance with federal regulations. Do not attempt to open the
chassis, transmitters. To do so will void the warranty, and may cause
improper operation.
Batteries caution
Keep batteries out of the reach of children.
Observe correct polarity as marked.
Do not expose the battery to excessive heat such as sunshine, fire or
the like.
Always consider the environment issues and follow local regulations
when disposing of batteries.
Remove depleted battery immediately.
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type.
Do not use new batteries and old one at the same time.
Do not use different batteries type or model.
Do not use a leaking battery. If battery leakage occurs, avoid contact
with skin.
If contact occurs, immediately wash thoroughly with soap and water.
If battery leakage comes into contact with your eyes, immediately flush
with water and seek medical.
Important information
4
●
Be sure to read the operation manual for the connected device
before use.
●
If you use the product close to an electronic device or communications
device (such as mobile phone), noise may be caused in the product. If
this happens, keep it away from such devices.
●
When setting up the product, make sure there are no obstacles
between the product and receiver that will block the signal.
●
If you use the product near a TV or radio antenna, noise may be
caused in the television or radio. If this happens, keep it away from
the television or radio.
●
To prevent the batteries from wearing out, turn off the receiver power
after use or when the product is not in use.
●
If the product is used for a long period of time, discoloration may
occur due to ultraviolet rays (especially direct sunlight) and friction.
●
Any alteration or modication of this product is prohibited by law.
Also, disassembly of this precision product may result in electrical
shock, equipment damage or re. Never disassemble this product.
●
If using multiple units in the same location, keep 80 cm or more
between individual transmitters and 3 m or more between
transmitters and receivers.
●
When using multiple units, turn on the transmitters one by one,
making sure there is no noise.
●
ATW-C6100/HD (Dynamic microphone unit)
●
ATW-C4100/HD (Dynamic microphone unit)
●
ATW-C98/HD (Dynamic microphone unit)
●
ATW-C5400/HD (Back electret condenser microphone unit)
●
ATW-C3300/HD (Back electret condenser microphone unit)
●
ATW-C4200/HD (Dynamic microphone unit with mute switch)
When using multiple wireless systems
About microphone units
The product can be attached to the following microphone units.
The microphone units must be purchased separately. They are not
included with the product.
Notes on use
Loading...