Audio-Technica ATW-RMS1 Datasheet

ATW-RMS1

Remote Mute Switch

Features

•

Rugged metal case

•

Heavy-duty pushbutton

•

Audio muting with no audible clicks

•

HRS-type input and output connectors

•

Stainless steel belt clip

wireless microphones & system accessories

Description

The ATW-RMS1 remote momentary mute switch allows a wireless user to mute their Audio-Technica wireless microphone quickly and easily during a presentation.

The ATW-RMS1 mute switch is ideal for sporting event referees, ministers, public speakers and other performers who need the ability to remotely mute a wireless microphone. It is designed to be installed between a wireless microphone using a 4-pin HRS-type connector and its associated UniPak® body-pack wireless transmitter.

The ATW-RMS1 features a toggle switch with positive “on” – “off” function. It is supplied with a permanently attached 22" cable terminated with an HRS-type connector that attaches to the input jack on a UniPak® transmitter. Its all-metal construction and heavy-duty switch are built to withstand rugged use. A durable belt clip is provided for ease of wear.

Architect’s and Engineer’s Specications

The remote mute switch shall enable a wireless microphone user to mute their microphone remotely from the transmitter. It shall be designed to connect between a wireless microphone (lavalier or headworn style) and its associated body-pack transmitter. The remote mute switch shall incorporate a large rugged toggle-type switch that can be found easily when the device is worn under clothing, costumes, or vestments. When toggled, this switch shall activate an internal electronic mute circuit that will mute the attached microphone quickly and silently with no pops or clicks heard in the audio. The unit shall be housed in ruggedly constructed metal enclosure with an attached durable belt clip. A 22" (minimum) cable shall be permanently attached to the box for connection to the associated wireless transmitter along with an HRS-type connector for attaching a microphone. The unit shall be nished in a low reective black paint.

The Audio-Technica ATW-RMS1 is specied.