Audio-Technica ATW-BH1 Datasheet
ATW-BH1
13.00 mm (0.512")
12.10 mm (0.476")
Antenna Bulkhead Connector Kit
Features
• Allows for remote antenna mounting in metal cabinets
• Includes two BNC bulkhead connectors and two 3' BNC cables
Description
The ATW-BH1 bulkhead connector kit permits the extension of wireless
antenna connection locations to the external walls and/or blank panels
of a metal equipment rack. It is designed to work with any wireless
system that uses BNC-type antenna connections. The kit consists of two
BNC-BNC male bulkhead connectors with mounting hardware and two
3' RG-58 BNC-BNC cables. (Note: this kit does not contain antennas, drill
bits or ”D“ punches.)
wireless microphones & system accessories
Architect’s and Engineer’s Specications
The BNC bulkhead connection kit shall allow the antenna connections
of associated wireless equipment to be extended to the external walls
and/or a blank panel of a metal equipment rack. It shall consist of a
pair of BNC-BNC male bulkhead type connectors and two 3' RG-58
BNC-BNC cables along with all associated hardware to secure the
connectors to a metal panel. Provide one Bulkhead connector kit for
each set of RF inputs as required.
The Audio-Technica ATW-BH1 is specied.
Recommended Mounting Hole
Note: Maximum panel thickness: 5.5 mm (0.217").
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com 0001-0093-00
Loading...