![](/html/92/9204/9204d12ce05029e83763f4bfa71f92f31d430f665f4497a929424f950ae14ef6/bg1.png)
AT8615RS
Microphone Desk Stand with Switch
Features
• Quick-mount plug-in desk stand for 3-pin XLRM-type output
• Silent electronic mute circuit for phantom powered microphones;
also works with dynamic mics
• Rugged mechanical switch provides push-on/push-off operation
• Operates on 11V to 52V phantom power
• 3-pin XLR-type connector for microphone input and output
• Heavy die-cast construction
• Low-prole design with low-reectance black nish for
minimum visibility
accessories
Specications
Input connectors 3-pin XLRF-type connector
Mute function Silent mute circuit designed to work with condenser
(powered) microphones
Switch Mechanical push-on/push-off
Input connector 3-pin XLRF-type
Output connector 3-pin XLRM-type
Off (mute) attenuation 44 dB minimum
Phantom power 11-52V DC, 2 mA typical
Requirements
Mounting Table-top with rubber feet
Dimensions 160.0 mm (6.29") maximum length, 130.0 mm (5.11")
maximum width, 39.0 mm (1.53") maximum height
In the interest of standards development, A.T.U.S. offers full details on its test methods to other industry professionals on request.
Specications are subject to change without notice.
1
Description
The AT8615RS desk stand features an internal electronic mute circuit
designed to work with phantom-powered microphones. A rugged
mechanical on/off switch providing push-on/push-off operation controls
the mute circuit. The sturdy metal base is equipped with three-pin
XLRF-type input and 3-pin XLRM-type output connectors. It is designed
to t any phantom-powered gooseneck microphone with a three-pin
XLRM-type output. The unit’s heavy die-cast construction and rubber feet
help minimize coupling of surface vibration while the low prole design
with low-reectance black nish provide minimum visibility.
Architect’s and Engineer’s Specications
The heavy desk stand base shall be designed to work with any dynamic
gooseneck or phantom powered condenser gooseneck microphone with
an integral 3-pin XLRM-type output connector. The base shall incorporate a rugged mechanical switch controlling an electronic mute circuit
designed to operate with phantom-powered condenser microphones. The
switch shall provide positive mechanical action and position indication to
show on or off operation. It shall operate from an external 11V to 52V DC
phantom power source. The unit shall offer a 3-pin XLRF-type input connector and a 3-pin XLRM-type connector for audio output. The unit shall
offer a low-reectance black nish. The unit’s dimensions shall be: 160.0
mm (6.29") maximum length, 130.0 mm (5.11") maximum width, 39.0 mm
(1.53") maximum height.
The Audio-Technica AT8615RS is specied.
160 mm
130 mm
Audio-Technica Corporation
audio-technica.com ©2015 Audio-Technica 0001-0243-01