AudioQuest SUB X Brochure

SUB-X

SUBWOOFER INTERCONNECT

Chassis Ground Wire

1.25% Silver
Conductors

• 1.25% Silver Conductors

• Identical +/- Conductors

• Chassis Ground Wire

Identical +/-

Gold-Plated, AQ Solder

SUB-X uses two identical solid 1.25% Silver conductors for positive and negative. Solid conductors eliminate
strand-interaction distortion. Foam PE insulation minimizes information smearing. A 100% coverage shield
insures noise-free performance. Gold-plated high-conductivity brass plugs are attached with specially
formulated AQ Silver Solder.

Silver-Plated Copper (SPC) always provides superior performance for video and digital audio. Unfortunately,
when used for full range analog audio, the discontinuity of plating silver over copper causes high frequencies
to sound edgy and harsh. However, when used only for subwoofer frequencies, SPC's "artificial edge"
actually enhances the articulation and intelligibility of low frequency information. Do not use Sub-X as a full
range audio cable.

DIRECTIONS: Sometimes there is a hum problem unless the subwoofer and receiver (or processor) are
attached to each other through a separate wire. If your system has a hum problem, try attaching the little
spade-lug tails to the metal chassis of the subwoofer amp and to the chassis of the sending component.
Usually, this extra wire will not be needed.

Conductors