AudioQuest SUB A Brochure

SUB-A

SUBWOOFER INTERCONNECT

SYMMETR ICAL COAX DESIGN

24 AWG Solid Long-Grain CopperLong-Grain Copper (LGC) Conductor (+)

Chassis Ground Wire

Solid LGC

Copper

Identical +/-

Gold-Plated, AQ Solder

Conductors

Sub-A minimizes distortion by using identical solid Long-Grain Copper conductors for “+” and “-“. Solid
conductors eliminate distortion caused by strand interaction. The simpler grain structure and fewer impurities
within Long-Grain Copper provide significantly clearer sound than normal OFHC copper. Gold-plated
high-conductivity plugs are attached with specially formulated AQ Solder.

DIRECTIONS: Sometimes there is a hum problem unless the subwoofer and receiver (or processor) are
attached to each other through a separate wire. If your system has a hum problem, try attaching the little
spade-lug tails to the metal chassis of the subwoofer amp and to the chassis of the sending component.
Usually, this extra wire will not be needed.

PVC Insulation
24 AWG Solid
Foil/Mylar/Foil ShieldShield
Blue PVC Jacket
Ground Wire
Clear PVC Jacket

LGCLGC Conductor (-)