Audionet VIP G-2 Owners manual

Recommended setup for 2-channel analog usage

Digital Audio Out → Dolby Digital Out → Dolby Digital
→ DTS Out → DTS Out
→ Linear PCM Out → Down Sample Off
→ MPEG Out → MPEG > PCM

Video Output → TV Screen → 16:9 (Wide)
→ Component Out → progressive
→ AV Connector → RGB
→ S-Video Out → S2
→ Still Picture → Auto

Language → Audio Language → English
→ Subtitle Language → English
→ Auto Language → On
→ Subtitle Display → off

Display → OSD Language → English
→ On Screen Display → On
→ Angle Indicator → On
→ Backgoround → Logo
→ Screen Saver → Off

Options → Parental Lock → Off
→ Bonus Group →
→ Auto Disc Menu → On
→ Group Playback → Single
→ DVD Playback Mode → DVD-Audio
→ SACD Playback → 2-ch Area
→ HDMI Settings → ...
→ CD Playback → PCM Playback
→ DTS Downmix → Stereo

Speakers → Audio Out → 2-ch
→ Speaker Installation → ...
→ Speaker Distances → ...
→ Channel Level → Fix

Note:

Additional settings for best sound quality of 2-channel analog usage:

· If available, select 2-channel audio track on DVD-Video or DVD-Audio disks.

· In case you listen to music only, use switch 4 on the back panel of the VIP G2 to shut down the

video section (switch position off).

· Put switch 11 in position H bit to activate the HighBit Mode (even if you are using the analog

outputs only!).