Audionet AMP-4 Owners manual
audionet
amP Iv
4 Channel Amplifier
Owner's Manual
Congratulations!
For those in need of even more amplification we have engineered the
AMP IV. The AMP IV is our power amplifier for multichannel applications and supplements our mono and stereo amplifiers. With its four
channels modern 6.1 home cinema is easily attainable as well as other
multichannel applications like, for example, bi-amping. With an intelligent circuit layout and high power output, the AMP IV plays sovereign
and slender. The sound quality is outstanding. The AMP IV does not get
worked up and plays highly emotionally. Like all our mono and stereo
power amplifiers we have realized Audionet's ultra-linear amplifier concept consequently within the AMP IV. Its circuits are designed for the
lowest distortion and highest speed and stability. The construction makes
the four channels operate independently as much as possible. A clever
protection circuit ensures the easiest handling, high operation safety, and
detects the correct mains phase. The inputs are equipped with goldplated, Teflon-insulated sockets, and the outputs with gold-plated loudspeaker terminals. Of course, AMP IV can be switched on and off remotely. The AMP IV fascinates with transparency, rich details and the
greatest of ease. Let yourself be more than inspired by its enthusiasm.
First, please read the manual and the precautions carefully. The AMP IV
is a complex unit and offers lots of common features. In case of difficulties, please do not hesitate to contact your dealer or our factory directly!
2
Installation and power supply
Placing
Connecting
Mains phase detection
Please find a place for your Audionet AMP IV that is sufficiently ventilated to allow the heat to dissipate.
Connect the power jack at the rear to your wall outlet. You should either
use the provided power cord or another one according to electrical specifications of your home country. Tuning with "audiophile" power cords
can lead to improved sound field. Ask your dealer for assistance.
NOTE: The power specifications on the rear must meet the electrical
specifications of your home country. The AMP IV is a Class I-system
and must be earthed. Please ensure a stable earth connection.
Your Audionet AMP IV is able to detect a wrong polarization of the
mains. If you see the front LED flashing quickly when powering on, flip
the plug in your wall outlet (also see below).
Additionally, on the rear panel you find a mark "phase" next to the mains
connector. If you have the optional "Audionet Power Cord", APC, the
phase is also marked on the wall plug itself.
The correct polarization of the mains is important for reasons of clarity
and stability of sound.
Auto Power On
WARNING: AMP IV switches on automatically (Auto Power On) when
using the mains switch at the rear panel (see section "Operating").
3
Loading...