Audio International AV-9693 Owners manual

4 (1)
Audio International AV-9693 Owners manual

 

 

 

 

 

 

Audio/Video Distribution Unit

a DeCrane Aircraft Company

 

 

 

 

 

A/V-9693-0x-x

Product Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio International’s A/V-9693-0x-x is a DO-160 tested

 

 

 

 

 

 

 

integrated audio/video controller that provides multiple source

 

 

 

 

 

 

 

selection, multiple output distribution, a high fidelity audio power

 

 

 

 

 

 

 

amplifier, and complete PA/chime functionality. This integrated

 

 

 

 

 

 

 

cabin entertainment unit cuts both cost and weight, frees valuable

 

 

 

 

 

 

 

aircraft space, and simplifies wiring.

 

 

 

 

 

 

 

 

 

 

Eight (8) entertainment audio and video sources inputs; 16

 

 

 

 

 

 

 

audio (headphones) and 16 video stations outputs; and four (4)

 

 

 

 

 

 

 

speaker outputs that can be configured for either full-range

 

 

 

 

 

 

 

speakers or subwoofers make the A/V-9693-0x-x an excellent

 

 

 

 

 

 

 

choice for premium cabin entertainment systems. Dual ten-band

 

Two (2) PA/chime audio outputs to interface with other aircraft

digital equalizers allow fine-tuning of the sound field for each

 

aircraft.

 

 

 

 

 

systems

 

 

 

 

 

Power output is rated at 4 x 75 WRMS into 4 Ω, less than 1%

 

Two (2) Speaker-level PA/chime audio outputs for galley and

THD. To ensure quality performance, a Weight-On-Wheels input

 

lavatory

 

 

 

 

 

increases or decreases amplifier output levels, automatically

 

Generates two-tone and single-tone high/low chimes with

changing speaker outputs when the aircraft is airborne.

 

 

 

multiple inputs for each, allowing flexible configuration of

A/V-9693-0x-x provides full aircraft PA/chime functionality; there

 

chime function

 

 

 

 

 

are three (3) prioritized microphone inputs and an audio briefer

 

PA/chime and audio briefer key inputs allow complete

input. PA and briefer input keys override entertainment audio and

 

entertainment audio override capabilities

 

 

 

 

a video briefer key input overrides entertainment video. Designed

 

Video briefer source is configurable, key input overrides

to allow flexible configuration of chime function, the unit generates

 

entertainment video

 

 

 

 

 

two-tone and single-tone high and low chimes with multiple inputs

 

Two (2) PA/chime key outputs for control of external events

 

for each. Microphone Audio Inputs for the A/V-9693-01-x have a

 

Cabin call ringer function

 

 

 

 

 

maximum gain of 1.

 

 

 

 

Application Notes

 

 

 

 

 

Control and interface with other components is handled via

 

 

 

 

 

AI’s proprietary RS-485 serial data bus. Two (2) ID inputs allow up

 

 

 

 

 

 

 

to four (4) units to be installed and operated independently on the

1. PA key inputs have highest priority and override briefer and

same data bus. Emergency power input is supplied to provide PA

 

entertainment audio inputs. When keys input are activated,

operation when the main power bus is not available.

 

 

 

entertainment audio is muted.

Chime

inputs

may

be

The “-x” suffix designates

the type of

connector

utilized;

 

configured to operate simultaneously with page and briefer

“-1” = Positronic and “-2” = D-Subminiature.

 

 

 

 

audio.

 

 

 

 

 

General Features

 

 

 

 

2. If a video briefer is installed in the aircraft, the briefer video

 

 

 

 

 

output may be connected to any video input configurable via

 

 

 

 

 

 

RS-485 interface. When activated, the video briefer overrides

+28 VDC operation with emergency power allows PA/chime

 

all other video sources and is displayed on all monitors.

 

during emergency

 

 

 

 

3.

A/V-9693-0x-x is designed to interface

with

other

AI

Configuration via external PC software application

 

 

 

equipment via the RS-485 serial data bus.

Two (2) binary

Independent audio control for one (1) or two (2) (configurable)

 

device ID pin inputs identify each module on the data bus in a

cabin sections

 

 

 

 

 

multi-unit configuration (up to 4).

All RS-485 data bus lines

Audio International RS-485 serial data bus compatible

 

 

 

must be daisy-chained between components.

 

 

 

Solid state circuitry

 

 

 

 

Installation Guidelines

 

 

 

 

 

DO-160 tested, rugged aircraft design

 

 

 

 

 

 

 

 

A/V Distribution Features

 

 

 

 

1. All power and ground connections of P7 must be at least 20

 

 

 

 

 

 

AWG. Power and ground connections to P13 must be at

8 audio inputs

 

 

 

 

 

least 16 AWG. Audio International recommends that all other

8 video inputs

 

 

 

 

 

power and ground wires be 22 AWG minimum.

Speaker

16 audio outputs

 

 

 

 

 

connection to P13 must also be 16 AWG twisted shield pair.

16 video outputs

 

 

 

 

 

All audio lines require twisted, shielded cable with the shields

 

 

 

 

 

 

grounded at the source.

 

 

 

 

 

Cabin Audio Features

 

 

 

 

2.

The chassis shall be electrically

bonded

to the

airframe

 

 

 

 

 

structure by a conductive mounting point with <0.1 Ω

 

 

 

 

 

 

Output 4 x 75 WRMS into 4 Ω, less than 1% THD

 

 

 

resistance using <50 Ω impedance cable.

Aluminum wool,

 

 

 

nylon webbing impregnated with aluminum oxide abrasive or

Dual 10-band, 1/3 octave graphic equalizers

 

 

 

 

 

 

fiber bristle brushes are the approved

tools for

removing

Four (4) speaker outputs, configurable for full range speakers

 

 

anodized surfaces at mounting point where the bonding wire

or bi-level operation

 

 

 

 

 

 

 

 

 

 

is attached. Power and Ground wires shall be in accordance

Internal electronic crossover for bi-level operation

 

 

 

 

 

 

with NEMA WC 27500 or equivalent.

Protect power wires

Weight-On-Wheels input

automatically

adjusts

speaker

 

 

with circuit breakers or fuses located close to the electrical

volume levels when airborne

 

 

 

 

 

 

 

 

 

 

power source bus.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PA/Chime Features

 

 

 

 

3.

A stud is provided on the front of each amplifier for grounding

 

 

 

 

 

of the unit. A minimum of 10 AWG wiring is recommended.

 

 

 

 

 

 

Three (3) prioritized microphone inputs (pilot, copilot, cabin)

 

This connection should be made to aircraft structure no more

 

than 12 inches from the unit.

 

 

 

 

 

Pilot/copilot microphone biasing capability

 

 

 

 

 

 

 

 

 

 

 

 

4.

Composite video connections shall be shielded coaxial cable

Audio briefer input

 

 

 

 

 

 

 

 

 

in accordance with M17/94-RG179 or equivalent.

 

 

Push-To-Talk input

 

 

 

 

 

 

 

 

 

 

 

5.

Locate the unit close to source equipment.

Long low-level

Cockpit chime inhibit feature

 

 

 

 

 

 

 

 

 

runs may introduce noise into the audio signal.

 

 

Pilot and copilot sidetone audio outputs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 1 of 2

Audio International, Inc. • 7300 Industry Drive, North Little Rock, AR 72117 • Phone 501-955-2929 / Fax 501-955-2988 / www.audiointl.com

 

 

 

 

 

 

 

 

Audio/Video Distribution Unit

 

a DeCrane Aircraft Company

 

 

 

 

 

 

 

 

 

 

 

 

A/V-9693-0x-x

Technical Specifications

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Electrical

Power (P7-1)

 

2 amp max @ +28 VDC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mechanical

 

Dimensions

 

8.72" x 13.86" x 3.50"

 

 

 

 

 

 

 

 

 

 

Power (P13-A)

 

12 amp max @ +28 VDC

 

 

 

 

 

 

 

 

(l x w x h)

 

22.1cm x 35.2cm x 8.89cm

 

Emergency power

 

6 amp max @ +28 VDC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Weight

 

 

8.2 lb / 3.7 kg

 

(P13-L)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio

Operating Range

 

+18 to +32 VDC,

 

 

 

 

 

 

 

 

 

 

 

 

 

+28 VDC Nominal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8 Stereo Inputs

 

1 to 5 VRMS @ 4.7 kΩ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16 Stereo Outputs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100 mW per output

 

 

Drawings

 

 

 

 

Description

 

(1st dedicated to

 

 

 

 

 

 

 

 

 

(@ 50Ω)

 

 

524884 Rev A

 

 

A/V-9693-0x-x Outline Drawing

 

internal amplifier)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Speaker Output

 

4 x 75 WRMS

 

 

 

 

 

 

 

 

 

 

 

 

Power

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Equalizer

 

Dual 10 bands, 1/3 octave

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Speaker Outputs

 

4 full range or 2 mid/tweet

 

 

 

 

 

 

 

 

 

 

 

 

 

and 2 subwoofer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Speaker

 

4 Ω

 

 

 

Document # 530513B – Revision History

 

Impedance

 

 

 

Level

 

 

Date

 

 

 

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IR

 

11/2003

 

 

 

Initial Release

 

 

 

High Range 135 Hz to

 

 

 

 

 

 

A

 

04/2004

 

 

Updated Wiring Requirements

 

 

 

20 kHz

 

 

 

 

 

 

Electronic

 

 

 

B

 

07/2004

 

Updated Outline Drawing and photo

 

 

Low Range 20 Hz to

 

 

 

 

 

Crossover

 

 

 

 

 

 

 

 

 

 

 

 

 

 

135 Hz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Configurable activation)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Weight on Wheels

 

Ground active, variable

 

 

 

 

 

 

 

 

 

 

 

 

Input

 

attenuation or gain

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video

Headphone Load

 

50 Ω to 1 kΩ

 

 

 

 

 

 

 

 

 

 

 

 

Impedance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8 Video Inputs

 

75 Ω, 1 V(p-p), composite

 

 

 

 

 

 

 

 

 

 

 

 

 

video (differential)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PA/Chime

16 Video Outputs

 

75 Ω, 1 V(p-p), composite

 

 

 

 

 

 

 

 

 

 

 

 

 

video

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pilot and Copilot

 

1 to 3 VRMS at 1 kΩ

 

 

 

 

 

 

 

 

 

 

 

 

Microphone Inputs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cabin Microphone

 

1 to 3 VRMS at 1 kΩ

 

 

 

 

 

 

 

 

 

 

 

 

Inputs (both units)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Briefer Audio Input

 

1 VRMS max at 4.75 kΩ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sidetone Output

 

1 – Pilot, 1 – Copilot

 

 

 

 

 

 

 

 

 

 

 

 

 

600 mW @ 600 Ω

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cockpit Chime

 

1 – Pilot, 1 – Copilot

 

 

 

 

 

 

 

 

 

 

 

 

Outputs

 

600 mW @ 600 Ω

 

 

 

 

 

 

 

 

 

 

 

 

PA/Chime Audio

 

2 – 600 mW @ 600 Ω

 

 

 

 

 

 

 

 

 

 

 

 

Output

 

impedance

 

 

 

 

 

 

 

 

 

 

 

 

PA/Chime Speaker

 

2 @ 8 Ω impedance

 

 

 

 

 

 

 

 

 

 

 

 

Outputs

 

12 WRMS

 

 

 

 

 

 

 

 

 

 

 

 

Two Tone Inputs

 

3 @ +28 VDC active

 

 

 

 

 

 

 

 

 

 

 

 

High Tone Input

 

1 – +28 VDC active

 

 

 

 

 

 

 

 

 

 

 

 

 

1 – Ground active

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Low Tone Input

 

1 – +28 VDC active

 

 

 

 

 

 

PROPRIETARY NOTICE

 

 

1 – Ground active

 

 

Despite any

copyright

notice, this data and information

 

 

 

 

 

 

 

 

 

 

 

 

disclosed herein contains confidential, proprietary designs owned

 

Call (Ringer) Input

 

Constant ground active

 

 

 

 

by Audio International, Incorporated. Neither this data nor the data

 

PA/Chime Key

 

2 open collector active

 

 

contained

herein

shall be

reproduced, used, or disclosed to

 

Outputs

 

ground 100 mA max

 

 

anyone without the written authorization of Audio International, Inc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 2 of 2

Audio International, Inc. • 7300 Industry Drive, North Little Rock, AR 72117 • Phone 501-955-2929 / Fax 501-955-2988 / www.audiointl.com

Loading...
+ 2 hidden pages