AudioCodes RXV100Hub Installation Manual

Page | 1

AudioCodes RXV100Hub – Microsoft® Teams Rooms (MTR)

Installation & Getting Started Guide

1. Before Getting Started

Congratulations on purchasing the AudioCodes RXV100Hub! This guide describes how to install the RXV100Hub and pair it with your RX50.

Use the diagram below as a reference to installing your RXV100Hub.

Note that the maximum UCB length is 3 meters Note that the active USB extension cable can extend USB 3.0 connections up to ~30 meters

Page | 2

Note:

Before pairing your RX50, upgrade it with firmware version 3.4.6.231 or later.

 To upgrade the firmware:

1. Open the RX50’s Web interface and click Management > Firmware Upgrade.

2. Navigate to and select the file UCRX50_3.4.6.231.img

3. Click Submit and then OK.

• The firmware upgrade takes approximately 20 minutes.

• After the upgrade, restore the RX50 to defaults (MENU>ADMIN>Restore Defaults).

[Applies only to customers who want to connect to the RX50 after purchasing the RX50 not as part of the MTR].

• Make sure the RXV100Hub | RX50 are in the same network.

When the RXV100Hub is switched on for the first time, Microsoft Teams Rooms (MTR) credentials must be provided to sign in.

 To provide MTR credentials:

1. In the RXV100Hub Setup Wizard, select Keyboard (English - US) and Region.

2. Accept the license agreement and select Next.

3. Under 'Supported meeting mode', select Skype for Business and Microsoft Teams (default).

4. Enter the Teams Rooms credentials and select Next > Next > Next > Finish.

+ 2 hidden pages