Audio Authority 1703-1 Installation Instructions Manual

Installation Instructions

Model 1703-1 Demo Audio Player.

Installation

• Read these instructions and set the Play Mode switches for the desired demo behavior (see page 2).

• Attach the player to a fl at surface with the screws provided.

• Connect two push-buttons for track selection. Push buttons should be four-wire momentary switches, and can be
illuminated (2-5 volt LED).

• Connect 4-wire rotary control for volume control (Model1794).

• Connect power supply to AC power, then to the 1703-1 power port.

• For initial testing, connect audio output to headphones or other known audio device and test player for desired
functionality and timeout settings.

• Connect audio output(s) to the headphone amplifi er.

• Check our website for troubleshooting tips using the Status LED: audioauthority.com/product_details/1703.

1703 TIPS

Model 1703-1

701-16300D

CUSTOMER INPUT

AUDIO OUTPUT 1

AUDIO OUTPUT 2

1794

ROTARY CONTROL

(VOLUME KNOB)

CUSTOMER
INPUT

ANALOG
OUTPUT 1

ANALOG
OUTPUT 2

VOLUME
KNOB 1

VOLUME
KNOB 2

NEXT

PREV

DIGITAL AUDIO

OUTPUT

STATUS

®

800-322-8346 • 859-233-4599 • www.audioauthority.com

MODEL 1703 DEMO AUDIO PLAYER

CONTROL

PLAY MODE

1 2 3 4 5 6 7 8

VOL 1 +VOL 1 –VOL 2 +VOL 2 –

PORT

ON

12V DC

POWER

/HC/XC

SD

MEDIA CARD

12V
POWER
INPUT

STATUS LED

8-NOT USED
7-NOT USED
6-NOT USED
5-LOUDNESS
4-NOT USED
3-NOT USED

1 & 2-TIMEOUT SETTINGS

SD CARD

4-WIRE BUTTONS

2-WIRE BUTTONS

BUTTON 1 BUTTON 2

Button and Rotary Control Functions

Volume is controlled using a rotary control knob (PN 1794). To select Output 1 or Output 2 use the two 4-wire
push buttons.

TIMEOUT: When Switch 1 or 2 is on, the demo stops playing after a period of inactivity. The timeout interval is the
amount of time after the last button press or knob turn until the demo ends and attract mode begins. Adjust the
length of the timeout interval using the settings below. When Switch 3 and 4 are off, the demo never times out.

1 MINUTE TIMEOUT SWITCH SETTINGS:

1 2 3 4 5 6 7 8

OFF ON - - - - - -

2 MINUTE TIMEOUT SWITCH SETTINGS:

1 2 3 4 5 6 7 8

ON OFF - - - - - -

3 MINUTE TIMEOUT SWITCH SETTINGS:

1 2 3 4 5 6 7 8

ON ON - - - - - -

NEVER TIMEOUT SWITCH SETTINGS:

1 2 3 4 5 6 7 8

OFF OFF - - - - - -

LOUDNESS: A DSP preset boosts bass frequency at 300Hz by +5dB and the treble frequency at 7 kHz by +5dB.

Use to enhance audio when played at low volumes. Loudness (5) may be used with any other play modes.

LOUDNESS SWITCH SETTINGS:

1 2 3 4 5 6 7 8

- - - - ON - - -

Customer Input

The 1703-1 accepts input from any device, such as an MP3 player, with a 3.5mm analog output. The 1703-1
automatically detects the device and overrides the internal player.

1703 TIPS

2048 Mercer Road, Lexington, KY 40511-1071 USA
800-322-8346 • 859-233-4599 • Fax: [phone]

[e-mail] • www.audioauthority.com

E-134 20161108