1
Startin g/stopping the engine · Adjusting front sea ts
%
advance d key
The advanced key allows you to lock and unlock the vehicle
and start the engine without handling the key itself. You only
need to have the remote control key on your person.
Unlocking the vehicle
Take hold of a door handle. The vehicle will be unlocked auto-
matically.
Locking the vehicle
Briefly touch the locking sensor on one of the door handles.
The selector lever must be in position P on vehicles with
automatic gearbox.
Note:
If you keep hold of the sensor, this will also close the
windows and the tilting panorama roof.
Adjusting front seats
Manual seat adjustment
e Adjusting head restraint
To raise head restraint:
Take hold of the sides of the head
restraint with both hands and move it up as required
To lower head restraint:
Press the button on the side and
move the head restraint down.
r Easy entry function
Slide the lever upwards and fold the
backrest down to the front.
t Adjusting backrest
Take your weight off the backrest
and turn the knob.
u Adjusting seat height
Lift or press the lever repeatedly until
the seat reaches the desired height.
i Adjusting lumbar support
Press the appropriate part of
the switch.
o Adjusting angle of seat cushion
Lift or press the lever repeatedly until
the seat reaches the desired height.
p Moving seat backwards or forwards
Lift the lever and move the seat into the desired position.
Then release the lever and move the seat further until the catch engages.
a Adjusting seat cushion
Lift the button and move the seat cushion.
Electrical seat adjustment
i Adjusting lumbar support
Press the appropriate part of
the switch.
s Adjusting seat height and
moving seat backwards
or forwards
Press the switch in the direction
indicated by the arrows:
To raise/lower the seat
at the front
To raise/lower the seat at
the rear
To raise/lower the seat
To move the seat forwards/
backwards
d Adjusting backrest/head restraint
Press the switch in the direction indicated
by the arrows:
Backrest further upright/further
reclined
Head restraint up/down
Starting/stopping the engine
Starting the engine
p Insert the key in the ignition lock.
p Manual gearbox: Press the clutch pedal and select neutral
gear.
p Automatic gearbox: Press the brake pedal and move the
selector lever to P or N.
p Press the key in briefly.
On vehicles with diesel
engine, keep your foot
on the clutch (manual
gearbox) or brake
(automatic gearbox)
until the engine starts.
Switching off the engine when the vehicle is stationary
p Vehicles with automatic gearbox: Move the selector lever to
P or N.
p Press the key in briefly.
Switching the ignition on/off
p Press in the key without pressing the clutch
(manual gearbox) or brake pedal (automatic gearbox).