AT&T UV FTTN Installation Manual

Installing your

AT&T Internet made easy

Before you get started

• Wait until 2 p.m. on your service activation date (located on your packing slip) to get started

• Download the Smart Home Manager app from your app store or att.com/smarthomemanager

• Sign in with your AT&T Access ID and password OR your account number and 4-digit passcode*

• Locate the AT&T broadband jack in your home

• Unpack your kit

*You need to h ave register ed your account t o have an Access ID.

Locate the AT&T broadband jack in your home.

Then connect:

The GREEN cable to the GREEN Broadband (DSL) ports

on both the Gateway and wall jack.

For wired connection only (optional):

The YELLOW Ethernet cable from the Gateway’s

YELLOW Ethernet port to your computer.

If you have digital phone service, connect:

The GR AY cable from the Gateway’s Phone Lines 1 & 2 port

to your phone.

The BLACK power supply from the Gateway to an

electrical outlet.

It will take about 10 minutes for your Gateway to power up. Wait for the Broadband and Service lights to turn solid green.

Note: If this doesn’t happen, see the

Troubleshooting section.

+ 2 hidden pages