This symbol is to alert you to important operating or servicing
instructions that may appear in this user’s manual. Always follow
basic safety precautions when using this product to reduce the risk
of injury, fire, or electric shock.
1. Read and understand all instructions in the user’s manual. Observe all
markings on the product.
2. Avoid using the telephone during a thunderstorm. There may be a slight
chance of electric shock from lightning.
3. Do not use the telephone in the vicinity of a gas leak. If you suspect a gas
leak, report it immediately, but use a telephone away from the area where
gas is leaking.
4. Do not use this product near water, or when you are wet. For example, do
not use it in a wet basement or shower, or next to a swimming pool,
bathtub, kitchen sink, or laundry tub. Do not use liquids or aerosol sprays
for cleaning. If the product comes in contact with any liquids, unplug any
line or power cord immediately. Do not plug the product back in until it
has dried thoroughly.
5. Install this product in a protected location where no one can trip over any
line or power cords. Protect cords from damage or abrasion.
6. If this product does not operate normally, read in case of difficulty in the
user’s manual. If you cannot solve the problem, or if the product is
damaged, refer to the Limited Warranty. Do not open this product except
as may be directed in your user’s manual. Opening the product or
reassembling it incorrectly may expose you to hazardous voltages or other
risks.
7. If this product has user-replaceable batteries, replace batteries only as
described in your user’s manual. Do not burn or puncture batteries — they
contain caustic chemicals.
1
Save these instructions
FCC and ACTA information
If this equipment was approved for connection to the telephone network prior
to July 23, 2001, it complies with Part 68 of the Federal Communications
Commission (FCC) rules. If the equipment was approved after that date, it
complies with the Part 68 rules and with Technical Requirements for
Connection of Equipment to the Telephone Network adopted by the
Administrative Council for Terminal Attachments (ACTA). We are required to
provide you with the following information.
1. Product identifier and REN information
The label on the back or bottom of this equipment contains, among other
things, an identifier indicating product approval and the Ringer Equivalence
Number (REN). This information must be provided to your local telephone
company upon request. For equipment approved prior to July 23, 2001, the
product identifier is preceded by the phrase “FCC Reg No.” and the REN is
listed separately. For equipment approved after that date, the product
identifier is preceded by “US” and a colon (:), and the REN is encoded in the
product identifier without a decimal point as the sixth and seventh
characters following the colon. For example, the product identifier US:
AAAEQ03T123XYZ would indicate a REN of 0.3.
The REN is used to determine how many devices you may connect to your
telephone line and still have them ring when you are called. In most, but
not all areas, the sum of all RENs should be five (5.0) or less. You may want
to contact your local telephone company for more information.
2. Connection and use with the nationwide telephone network
The plug and jack used to connect this equipment to the premises wiring
and the telephone network must comply with the applicable Part 68 rules
and technical requirements adopted by ACTA. A compliant telephone cord
and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. An RJ11
jack should normally be used for connecting to a single line and an RJ14
jack for two lines. See installation instructions in the user’s manual. This
equipment may not be used with coin telephone lines or with party lines. If
you have specially wired alarm dialing equipment connected to your
telephone line, ensure the connection of this equipment does not disable
your alarm equipment. If you have questions about what will disable the
alarm equipment, consult your telephone company or qualified installer.
3. Repair instructions
If this equipment is malfunctioning, it must be unplugged from the modular
jack until the problem has been corrected. Repairs to this telephone
2
equipment can only be made by the manufacturer or its authorized agents.
For repair procedures, follow the instructions outlined under the Limited
Warranty.
4. Rights of the telephone company
If this equipment is causing harm to the telephone network, the telephone
company may temporarily discontinue your telephone service. The
telephone company is required to notify you before interrupting service. If
advance notice is not practical, you will be notified as soon as possible. You
will be given the opportunity to correct the problem and the telephone
company is required to inform you of your right to file a complaint with the
FCC. Your telephone company may make changes in its facilities,
equipment, operation, or procedures that could affect the proper
functioning of this product. The telephone company is required to notify
you if such changes are planned.
5. Hearing aid compatibility
If this product is equipped with a corded or cordless handset, it is hearing
aid compatible.
6. Programming/testing of emergency numbers
If this product has memory dialing locations, you may choose to store
police, fire department and emergency medical service telephone numbers
in these locations. If you do, please keep three things in mind:
a We recommend that you also write the telephone number on the
directory card (if applicable), so that you can still dial the emergency
number manually if the memory dialing feature doesn’t work.
b This feature is provided only as a convenience, and the manufacturer
assumes no responsibility for customer reliance upon the memory
feature.
c Testing the emergency telephone numbers you have stored is not
recommended. However, if you do make a call to an emergency number:
You must remain on the line and briefly explain the reason for the call
before hanging up.
Programming/testing of emergency numbers should be performed
during off-peak hours, such as in the early morning or late evening,
when the emergency services tend to be less busy.
Interference information:
Part 15 of FCC rules
Some telephone equipment generates, uses, and can radiate radio-frequency
energy and, if not installed and used properly, may cause interference to radio
and television reception.
This product has been tested and found to meet the standards for a Class B
3
digital device, as specified in Part 15 of the FCC Rules. These specifications
are designed to provide reasonable protection against such interference in a
residential installation. However, there is no guarantee that interference will
not occur in a particular installation.
If this product causes interference to radio, VCR or television reception when
it is in use, you might correct the interference with any one or all of these
measures:
— Where it can be done safely, re-orient the receiving radio, VCR or television
antenna.
— To the extent possible, relocate the radio, VCR, television or other receiver
with respect to the telephone equipment.
— If this telephone product runs on AC power, plug your product into an AC
outlet that’s not on the same circuit as one used by your radio, VCR or
television.
Modifications to this product, not expressly approved by the manufacturer,
could void the user’s authority to operate the equipment.
Limited warranty
The AT&T brand is used under license - any repair, replacement or warranty
service, and all questions about this product should be directed to: In the
United States of America call
www.telephones.att.com;
1. What does this limited warranty cover?
The manufacturer of this AT&T-branded product warrants to the holder of a
valid proof of purchase (“CONSUMER” or “you”) that the product and all
accessories provided in the sales package (“PRODUCT”) are free from
defects in material and workmanship, pursuant to the following terms and
conditions, when installed and used normally and in accordance with the
PRODUCT operating instructions. This limited warranty extends only to the
CONSUMER for products purchased and used in the United States of
America and Canada.
2. What will be done if the PRODUCT is not free from defects in materials and
workmanship during the limited warranty period (“materially defective
PRODUCT”)?
During the limited warranty period, the manufacturer’s authorized service
representative will repair or replace at the manufacturer’s option, without
charge, a materially defective PRODUCT. If the manufacturer repairs the
PRODUCT, they may use new or refurbished replacement parts. If the
manufacturer chooses to replace the PRODUCT, they may replace it with a
1 (800) 222-3111
in canada,
call 1 (866) 288-4268.
or visit
4
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.