AT&T MERLIN Plus Release 1, MERLIN Plus Customization Chart

Page 1
AT&T
®
MERLIN
COMMUNICATIONS SYSTEM
Release 1 Customization Chart
PIus
Page 2
How to Use This CUSTOMIZATION CHART
Follow this chart to perform all of your administration procedures. More detailed instructions are included in
Section 5, “Reference,” of the MERLIN Plus System Manual. If you have any
problems or questions please call the
MERLIN System Hotline: 1-800-628-2888.
®
©
1988 AT&T
All Rights Reserved Printed in USA
MERLIN is a registered trademark of AT&T. Issue 1
November, 1988
Page 3
SYSTEM RESET
DIAL 99198 TURN power off, wait 10 seconds TURN power on
DIAL CODE CHART
INTERCOM
NUMBER
10 11 12 #20 13 14 15
16 #16
17
18 19
If you do not have an Auto Intercom button for all of the voice terminals in your system, use this dial code chart when instructed to do so in these administration procedures.
DIAL
CODE
#22
#21
#19
#18
#17
#15 #14 #13
INTERCOM
NUMBER
20 21 22 23 24 25 26 27 28 29
DIAL
CODE
#03 #04 #05 #06
#07
#08 #09
#10
#11
#12
Page 4
AT VOICE TERMINAL 10
TO ENTER ADMINISTRATION MODE: SLIDE the T/P switch to P
TOUCH Administer or dial #01†
TO LEAVE ADMINISTRATION MODE:
SLIDE the T/P switch to center position
BASIC ADMINISTRATION
NUMBER OF OUTSIDE LINES
DIAL 4 DIAL one digit for the number of lines (1–8) TOUCH Administer
DIAL SIGNALS
38 Touch-Tone (F‡)
DIAL
39 Rotary
TOUCH Administer
LONG DISTANCE DIALING
36 Toll prefix (0 or 1) needed (F)
DIAL
37 Area code only needed
TOUCH Administer
TRANSFER RETURN INTERVAL
DIAL 2 DIAL one digit for the number of rings before
a transferred call returns to the attendant (0–9) (F= 4 rings)
TOUCH Administer
GROUP PAGING
71 Group 1 (voice terminals
DIAL
72 Group 2 (voice terminals
TOUCH Auto Intercom button (or dial
appropriate code from dial code chart)
Green light on = telephone assigned Green lighf off = telephone removed
(or TOUCH Drop to remove all telephones
from a paging group)
TOUCH Administer
CALL REPORT AND SYSTEM FEATURE REPORT
DIAL
82 Call Reports (SMDR)85 System Feature Report
TOUCH Auto Intercom button (or dial
intercom number) of jack (F = jack 19)
Green light on = jack assigned Green light off = jack not assigned
TOUCH Administer
10–19) (F)
20–29) (F)
LINE ADMINISTRATION
ASSIGN LINES TO A VOICE TERMINAL
TOUCH Auto Intercom button (or dial intercom
number)
TOUCH line buttons
Green light on = line assigned Green light off = line not assigned
TOUCH Administer
BUTTON - FREE LINE OPERATION
TOUCH Auto Intercom button (or dial intercom
number)
TOUCH line buttons
Green light on = line assigned Green light off = line not assigned
(or DIAL 34 to reassign lines to
separate buttons)
31 Incoming calls ring
DIAL
32 Incoming calls don’t ring
TOUCH Administer
SYSTEMWIDE OPTIONS
ALLOWED LIST ENTRIES
DIAL three-digit list code ( 01– 08) DIAL two-digit item number (01–10) To add an entry:
DIAL the allowed number (up to six digits) TOUCH Administer
To remove an entry:
TOUCH Drop TOUCH Administer
ASSIGN CALL RESTRICTIONS
TOUCH Auto Intercom button (or dial intercom
number)
TOUCH Restrict until:
Green light on steady = Unrestricted Green light flashing = Toll Restricted (no Green light off = Outward Restricted
TOUCH Administer
ASSIGN ALLOWED/DISALLOWED LISTS
DIAL three-digit list code:
01– 08 Allowed list codes DIAL 00 TOUCH Auto Intercom button (or dial
appropriate code from dial code chart)
Green light on = list assigned Green light off = list not assigned
TOUCH Administer
SYSTEM SPEED DIAL
DIAL code (#60—#99)
88 Account code assignment92 Restriction override
DIAL
90 No restriction override DIAL to make the number private DIAL
Telephone number Account number
TOUCH Administer
(all calls)
long distance calls)
(no outside calls)
MUSIC VOLUME
MUSIC-ON-HOLD VOLUME
12 Off13 Low
DIAL
14 Medium (F)15 High
TOUCH Administer
BACKGROUND MUSIC VOLUME
16 Off17 Low
DIAL
18 Medium (F)19 High
TOUCH Administer
If you are using a 10-button voice terminal for administration, dial #01 in place of touching
Administer
F=Factory setting.
when following these procedures.
Page 5
REPORT OPTIONS
VOICE TERMINAL OPTIONS
CALL REPORT - TYPE OF CALLS REPORTED
DIAL ✶ 84
0 No calls (F) 1 Outgoing calls only
DIAL
2 All calls
TOUCH Administer
CALL REPORT - MINIMUM CALL DURATION
DIAL 83 DIAL one digit for the minimum number of
minutes (0–9) (F=1 minute)
TOUCH Administer
SYSTEM FEATURE REPORT & CALL REPORT (SMDR) - DATE/TIME
DATE
DIAL 80 DIAL two digits for the month (01–12) DIAL two digits for the day (01–31) DIM two digits for the year (00–99) TOUCH Administer
TIME
DIAL 81 DIAL two digits for the hour (00–23) DIAL two digits for the minutes (00–59)
TOUCH Administer
CENTRALIZED PROGRAMMING
TOUCH Auto Intercom button (or dial intercom TOUCH Conference
PROGRAM telephone TOUCH Conference
COPY
TOUCH Auto Intercom button (or dial intercom TOUCH Copy
TOUCH Auto Intercom button (or dial intercom TOUCH Administer
number)
number)
number) of the source phone
SYSTEM FEATURE REPORT - PRINTOUT
60
System administration report and individual telephone reports
61
System administration report only
62
DIAL
TOUCH Administer
Individual telephone reports TOUCH one or more Auto Intercom buttons (or dial intercom numbers)
Abort printout and cancel all
63
other report requests
Page 6
999-503-146
Loading...