Page 1
Quick Start Guide
2.4 GHz Cordless
Telephone/Answering
System E2725B/E1225B
with Caller ID & Call Waiting
96-005819-020-000.E1225B.R0.qxd 13-02-1950 19.21 Page 1
Page 2
Installation and setup
Connect the base and install battery as shown below. After installation, place the handset in the base to charge for 12 hours before use. You can keep the battery charged by
returning the handset to the base or charger after each use.
Replace compartment cover.
Press tab to open
battery compartment.
Caution: Use only supplied rechargeable battery or AT&T replacement battery model 2419 (Part number 80-554300-00) or battery model 2420 (SKU
00578. Part number 80-5542-00-00).
Insert supplied
battery.
Place handset in base to charge for 12 hours
before first use.
Plug telephone line cord into
telephone jack.
Plug power cord
transformer into
electrical outlet.
96-005819-020-000.E1225B.R0.qxd 13-02-1950 19.21 Page 2
Page 3
> shows highlighted item
Press ^or Vto scroll
through menu items.
Press SELECT to select or
modify a highlighted item.
Press OFF to cancel an operation, back up to the previous
menu, or exit the menu display.
Feature Menu
Directory
Call Log
Ringer Volume
Ringer Tone
Key Tone
Handset Name
Language
CLR Voice Mail
Dial Type
Menu
CALL LOG
>DIRECTORY
Feature menu
Handset
Phone/Flash
Press to begin a call, then dial a number.
During a call, press to receive an incoming
call, if Call Waiting is activated.
Speaker
Press to activate handset speakerphone.
Press again to resume normal handset use
(earpiece).
V CID
Press to scroll down in menus.
Press when phone is not in use to display
Caller ID information. While entering
names, press to move the cursor to the
left.
Redial/Pause
Press to view redial memory.
While entering numbers, press and hold to
insert a dialing pause.
Quick reference guide
Off/Clear
During a call, press to hang up.
While using menus, press to cancel an
operation, back up to the previous
menu, or exit the menu display.
Intercom
Press to transfer a call or initiate an
intercom conversation.
Mute/Delete
Press to mute microphone. While
reviewing call log, press and hold to
clear Caller ID log.
Select/Menu
Press to display menu, or to select
highlighted item from menu.
^ DIR
Press to scroll up in menus.
Press when phone is not in use to display
phone book entries. While entering
names, press to advance cursor.
96-005819-020-000.E1225B.R0.qxd 13-02-1950 19.21 Page 3
Page 4
Quick reference guide
Copyright © 2004 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
licensed to Advanced American Telephones.
Issue 2 AT&T 02/05
96-005819-020-000
Answering System Controls
ON/OFF ..................Press to turn answering system on or off.
DELETE ..................Press to delete message. Hold to delete all old messages.
TIME SET................Press to review or set the answering system clock.
MENU......................Press to review or change answering system options.
CHANGE ................Press to change a menu option.
RECORD ................Press to record a memo or outgoing announcement.
Telephone Base
In Use
On when handset is in use. Flashes when another phone
is in use on the same line, or answering system is
answering an incoming call.
Charging
On when handset battery is
charging.
Volume
Press to adjust message
playback volume.
Handset Locator
Press to locate handset if lost.
Press to play or stop playing messages.
Press to repeat message.
Hold to slow playback.
Press twice to hear
previous message.
Press to skip to next
message. Hold to speed
up playback.
96-005819-020-000.E1225B.R0.qxd 13-02-1950 19.21 Page 4
Loading...