AT&T 1145 User Manual

User Manual (Part 2)

2.4 GHz Cordless Telephone 1445/1145

with Caller ID & Call Waiting

Table of contents

Getting Started

QUICK REFERENCE GUIDE..................2

Parts checklist .......................................4

Before you begin ..................................5

Telephone base installation................6

Battery installation & charging ..........7

Wall mounting ......................................8

Belt clip & optional headset ..................9

Telephone Operation

Customizing your telephone...........10

Making and answering calls..............12

Options while on calls ......................13

Handset locator .................................14

Directory Dialing

Directory dialing ................................15

Speed dialing........................................16

Entering names into directory ........17

Directory name search.....................18

To move, edit or delete a listing ....19

Caller ID Operation

Caller ID operation...........................20

To review yourcall log......................21

To dial a call log entry ......................22

To delete call log entries .................23

To add entries to phone directory..24

Appendix

Screen messages, lights and tones....25

In case of difficulty .............................27

Technical specifications ....................28

Index .....................................................29

AT&T and the Globe Design are trademarks of AT&T Corp.,

licensed to Advanced American Telephones.

User Manual (Part 2)

2.4 GHz Cordless Telephone 1445/1145

with Caller ID & Call Waiting

STOP!

See page 7

for easy instructions

You must install and charge the battery before using the telephone

CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully:

• Use only Replacement Battery 2422 (SKU# 23402).

• Do not dispose of the battery in a fire. Like other batteries of this type, it could explode if burned. Check with local codes for special disposal instructions.

• Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

• Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm.

• Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

• Observe proper polarity orientation between the battery and battery charger.

Do not disassemble your telephone. There are no user-serviceable parts inside. Refer for servicing to qualified service personnel.

For customer service or product information, visit our web site at

www.telephones.att.com

or call 1-800-222-3111

Please also read

Important Product Information

Enclosed in product package

Getting Started

Select

Press to store a programming option (see page 10), or to store a directory entry in memory (see page 17).

Quick reference guideQuick reference guide

Off

During a call, press to hang up.

During programming, press to stop without making changes.

Hold

Press to place a call on hold. Press again to resume your call.

^V Volume/Function

During a call, press

to adjust

listening volume.

While programming, press to change menu item or value (see page 10).

Press

DIR

when phone is not in use to display phone book entries (see page 18). While entering or modifying names, press to advance cursor.

Press

CID

when phone is not in use to display Caller ID information (see page

21). While entering numbers or letters, press to delete last character entered.

Phone/Flash

Press to begin a call, then dial a number.

During a call, press to receive an incoming call, if Call Waiting is activated (see page 13).

Chan/Delete

If call is noisy or unclear, press to switch to a clearer channel.

Press and hold to delete all Caller ID entries.

Prog

Press to customize the telephone’s operation (see page 10).

Redial/Pause

Press to redial last number called.

While dialing or entering numbers into your phone directory, press to insert a 4-second dialing pause (see page 17).

Press once to enter “A”

Press twice

to enter “B”

Press 3 times to enter “C”

Press 4 times

to enter “2”

NEW 00 OLD 27

0 8/12 10:06

Date and time (see page 10)

Low battery (see page 7)

Incoming calls (see page 20)

Handset

Telephone Base

Using the dial pad to enter letters (see page 17)

ANTENNA

Swivel fully upright for best results.

PAGE/ HANDSET LOCATOR

Press to locate handset if lost (see page 14).

IN USE/CHARGING

Steady: Handset battery is charging. Flashing: Phone is in use, or call is

on hold.

MESSAGE

Flashes when you have new voice mail (requires voice mail service from your local telephone company).

NEW CALL

If you have Caller ID service: On when new calls have been received; off when all new Caller ID records have been reviewed (see page 20).

Getting Started

Before you beginParts checklist

Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following:

Telephone base Telephone handset

Power adapter

Belt clip

Battery pack

Long line cord

Short line cord

About Caller Identification

Caller ID with Call Waiting features in this telephone let you see who’s calling before you answer the phone, even when you’re on another call. These features require services provided by your local telephone company.

Contact your telephone service provider if:

• You have both Caller ID and Call Waiting, but as separate services (you may need combined service)

• You have only Caller ID service, or only Call Waiting service

• You don’t subscribe to any Caller ID or Call Waiting services.

You can use this phone with regular Caller ID service, and you can use its other features without subscribing to either Caller ID or combined Caller ID with Call Waiting service. There may be fees for these services, and they may not be available in all areas.

Caller ID features will work only if both you and the caller are in areas offering Caller ID service, and if both telephone companies use compatible equipment.

See Caller ID Operation, beginning on page 20, for more details about how these features work.

Telephone operating range

This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base antenna fully upright.

If you receive a call while you are out of range, the handset might not

ring — or if it does ring, the call might not connect when you press PHONE. Move closer to the base, then press

PHONE to answer the call.

If you move out of range during a phone conversation, you might hear

noise or interference. To improve reception, move closer to the base.

If you move out of range without pressing OFF, your phone will be left

“off the hook.” To hang up properly, walk back toward the telephone base, periodically pressing OFF until the call is disconnected.

Getting Started

Battery installation & charging

After installation, place the handset in the base and allow the battery to charge for 12 hours before use. You can keep the battery charged by returning the handset to the base after each use. When battery power is fully depleted, a full recharge takes about 8 hours.

Charging light will be illuminated while battery is charging.

Telephone base installation

Install the telephone base as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.

NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1 800 222–3111.

Be sure to use an electrical outlet not controlled by a wall switch.

Rotate antenna to fully upright position

Plug power cord transformer into electrical outlet

Plug long line cord into telephone jack

Place handset in base to charge for 12 hours before first use.

Plug in battery here

Low battery indicator

Return handset to base to recharge when this symbol appears. (Handset will beep when battery is low.)

NEW 00 OLD 27

0 8/12 10:06

Press coin into slot on base of handset to release latch, then remove cover

To replace cover:

1 Insert tabs at top of

cover into slots on base

2 Align tab at bottom of

cover with slot in base, then press to click in place

+ 11 hidden pages