AT&T 1145 User Manual
User Manual (Part 2)
2.4 GHz Cordless
Telephone 1445/1145
with Caller ID & Call Waiting
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 1
Copyright © 2003 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
licensed to Advanced American Telephones.
STOP!
See page 7
for easy instructions
You must install and
charge the battery before
using the telephone
CAUTION: To reduce the risk of fire or injury to persons or damage to the
telephone, read and follow these instructions carefully:
• Use only Replacement Battery 2422 (SKU# 23402).
• Do not dispose of the battery in a fire. Like other batteries of this type, it could explode
if burned. Check with local codes for special disposal instructions.
• Do not open or mutilate the battery. Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if swallowed.
• Exercise care in handling batteries in order not to short the battery with conducting
materials such as rings, bracelets, and keys. The battery or conductor may overheat and
cause harm.
• Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.
• Observe proper polarity orientation between the battery and battery charger.
Do not disassemble your telephone. There are no user-serviceable parts inside. Refer for
servicing to qualified service personnel.
For customer service or product
information, visit our web site at
www.telephones.att.com
or call 1-800-222-3111
Please also read
Important Product Information
Enclosed in product package
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 2
1
Table of contents
Getting Started
Q
UICK REFERENCE GUIDE
..................2
Parts checklist .......................................4
Before you begin ..................................5
Telephone base installation................6
Battery installation & charging ..........7
Wall mounting ......................................8
Belt clip & optional headset ..................9
Telephone Operation
Customizing your telephone...........10
Making and answering calls..............12
Options while on calls ......................13
Handset locator .................................14
Directory Dialing
Directory dialing ................................15
Speed dialing........................................16
Entering names into directory ........17
Directory name search.....................18
To move, edit or delete a listing ....19
Caller ID Operation
Caller ID operation...........................20
To review yourcall log......................21
To dial a call log entry ......................22
To delete call log entries .................23
To add entries to phone directory..24
Appendix
Screen messages, lights and tones....25
In case of difficulty .............................27
Technical specifications ....................28
Index .....................................................29
User Manual (Part 2)
2.4 GHz Cordless
Telephone 1445/1145
with Caller ID & Call Waiting
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 1
2
Getting Started
Select
Press to store a programming option
(see page 10), or to store a directory
entry in memory (see page 17).
Quick reference guide
Off
During a call, press to hang up.
During programming, press to stop
without making changes.
Hold
Press to place a call on hold. Press
again to resume your call.
^V Volume/Function
During a call, press
^V
to adjust
listening volume.
While programming, press to change
menu item or value (see page 10).
Press
DIR
when phone is not in use to
display phone book entries (see page 18).
While entering or modifying names, press
to advance cursor.
Press
CID
when phone is not in use to
display Caller ID information (see page
21). While entering numbers or letters,
press to delete last character entered.
Phone/Flash
Press to begin a call, then dial a number.
During a call, press to receive an incoming
call, if Call Waiting is activated (see page 13).
Chan/Delete
If call is noisy or unclear, press
to switch to a clearer channel.
Press and hold to delete all
Caller ID entries.
Prog
Press to customize the telephone’s
operation (see page 10).
Redial/Pause
Press to redial last number
called.
While dialing or entering numbers into your phone directory,
press to insert a 4-second
dialing pause (see page 17).
Press once to enter “A”
Press twice to enter “B”
Press 3 times
to enter “C”
Press 4 times
to enter “2”
2
NEW 00 OLD 27
0 8/12 10:06
AM
Date and time
(see page 10)
Low battery
(see page 7)
Incoming calls (see page 20)
Handset
Using the dial pad to enter letters (see page 17)
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 2
3
Getting Started
Quick reference guide
Telephone Base
ANTENNA
Swivel fully upright for
best results.
PAGE/ HANDSET LOCATOR
Press to locate handset
if lost (see page 14).
IN USE/CHARGING
Steady: Handset battery is charging.
Flashing: Phone is in use, or call is
on hold.
MESSAGE
Flashes when you have new voice
mail (requires voice mail service
from your local telephone company).
NEW CALL
If you have Caller ID service: On
when new calls have been received;
off when all new Caller ID records
have been reviewed (see page 20).
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 3
4
Getting Started
Parts checklist
Remember to save your sales receipt and original packaging in case you ever need to
ship your telephone for warranty service. Check to make sure the telephone package
includes the following:
Telephone base Telephone handset
Power
adapter
Belt clip
Battery pack
Long line cord
Short line cord
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 4
5
Getting Started
Before you begin
About Caller Identification
Caller ID with Call Waiting features in
this telephone let you see who’s calling
before you answer the phone, even
when you’re on another call. These
features require services provided by
your local telephone company.
Contact your telephone service
provider if:
• You have both Caller ID and Call
Waiting, but as separate services
(you may need combined service)
• You have only Caller ID service, or
only Call Waiting service
• You don’t subscribe to any Caller
ID or Call Waiting services.
You can use this phone with regular
Caller ID service, and you can use its
other features without subscribing to
either Caller ID or combined Caller ID
with Call Waiting service. There may
be fees for these services, and they
may not be available in all areas.
Caller ID features will work only if
both you and the caller are in areas
offering Caller ID service, and if both
telephone companies use compatible
equipment.
See Caller ID Operation, beginning on
page 20, for more details about how
these features work.
Telephone operating range
This cordless telephone operates with
the maximum power allowed by the
Federal Communications Commission
(FCC). Even so, this handset and base
can communicate over only a certain
distance — which can vary with the
locations of the base and handset, the
weather, and the construction of your
home or office. For best performance,
keep the base antenna fully upright.
If you receive a call while you are out of range, the handset might not
ring — or if it does ring, the call might
not connect when you press PHONE.
Move closer to the base, then press
PHONE to answer the call.
If you move out of range during a phone conversation, you might hear
noise or interference. To improve
reception, move closer to the base.
If you move out of range without
pressing OFF, your phone will be left
“off the hook.” To hang up properly,
walk back toward the telephone base,
periodically pressing OFF until the call
is disconnected.
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 5
6
Getting Started
Telephone base installation
Install the telephone base as shown below. Choose a location away from electronic
equipment, such as personal computers, television sets or microwave ovens. Avoid
excessive heat, cold, dust or moisture.
NOTE: Use only the power
cord supplied with this product.
If you need a replacement, call
1 800 222–3111.
Be sure to use an electrical outlet
not controlled by a wall switch.
Plug power cord transformer into electrical outlet
Plug long line cord into telephone jack
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 6
7
Getting Started
Battery installation & charging
After installation, place the handset in the base and allow the battery to charge for 12
hours before use. You can keep the battery charged by returning the handset to the base
after each use. When battery power is fully depleted, a full recharge takes about 8 hours.
Charging light will be illuminated
while battery is charging.
Rotate antenna
to fully upright
position
Place handset in base to charge for 12 hours
before first use.
Plug in battery here
Low battery indicator
Return handset to base to recharge
when this symbol appears. (Handset
will beep when battery is low.)
NEW 00 OLD 27
0 8/12 10:06
AM
Press coin into slot on
base of handset to
release latch, then
remove cover
To replace cover:
1 Insert tabs at top of
cover into slots on base
2 Align tab at bottom of
cover with slot in base,
then press to click in
place
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 7
8
Getting Started
Wall mounting
The telephone base can be installed on any standard wall-phone outlet as shown below.
Choose a location away from electronic equipment, such as personal computers,
television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
Plug power cord transformer into electrical outlet
Press and slide down firmly so base is held securely on outlet mounting pegs
Plug short line cord into telephone jack
Connect line cord and AC adapter as shown on page 6, then press notch and pull to open hinged wall mount
Swivel wall mount down and lock in place
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 8
9
Getting Started
Belt clip & optional headset
Install belt clip as shown below if desired.
For hands-free telephone conversations, you can use any industry standard 2.5 mm
headset (purchased separately). For best results use an AT&T 2.5 mm headset.
Snap belt clip into notches on
side of handset. Rotate and pull
to remove.
Plug 2.5 mm headset
into jack on side of
handset (beneath
small rubber cap)
91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 9
Loading...