Atomos Shinobi SDI User Manual
SHINOBI
SHINOBI SDI
QUICK START GUIDE
Contents
Introduction
Introduction ........................ 2
Checklist
You will also need
AtomX Accessories
Getting started
Connect and Power-up
Input
Physical features
Touchscreen/User Interface
Monitor assist tools
Warranty & Conditions
2 Shinobi SDI - Quick Start Guide
.......................... 3
.................. 3
................ 3
..................... 4
............. 4
............................... 5
................... 6
........ 8
................ 9
............. 10
Thank you for purchasing the Atomos Shinobi SDI, utilizing
professional HD-SDI and HDMI connectivity to monitor up
to professional 4Kp30 (via HDMI) and 1080p (via HD-SDI).
The class leading AtomHDR monitor lets you visualize 10+
stops of dynamic range, with 1000nit brightness for daylight
viewing and 10-bit processing for smooth gradations. Please
take the time to read through this Quick Start Guide and
register your product for free updates.
DOWNLOAD THE FULL
SHINOBI SDI USER MANUAL
www.atomos.com/support
Checklist
Accessories (sold separately)
q 1 x Shinobi SDI
q 1 x AC Power Adaptor
q 1 x Quick Start Guide
You will also need (sold separately)
HD-SDI Cable
SDI cables are robust physically and electrically. You should
rarely have problems with signal transmission unless your cables
are either damaged or too long. Please remember that SDI
cables use locking connectors and will not simply pull out if they
are jerked or tripped over. They are therefore a signicant trip
hazard, and also a hazard to your equipment, which may be
damaged if the cables are mishandled or of a low grade. Please
ensure you test and check your SDI cables; for longer runs
cables of a Belden 1694A specication are recommended.
HDMI Cable
Atomos have a range of HDMI cables with die cast
connectors and coiled cables in a range of lengths and
connections (sold separately).
See the full range of Atomos HDMI cables on our website:
www.atomos.com/hdmi-cables
Atomos have a range of accessories tailored to usage with
the Shinobi SDI. Visit your nearest Atomos reseller to discover
the range of available accessories that will get you up and
running enhance your production workow.
Batteries and power:
- ATOMOS 5200mAh 4 Cell NPF Style Battery NP-770
- ATOMOS 7800mAh 6 Cell NPF Style Battery NP-970
- ATOMOS Fast Battery Charger with Multi plug PSU
- ATOMOS Power Kit for all Atomos 5” & 7”
Monitor Recorders
Cables:
- ATOMOS AtomFLEX HDMI 4K60p Full to Full
(30cm/40cm/50cm)
- ATOMOS AtomFLEX HDMI 4K60p Full to Micro
(30cm/40cm/50cm)
- HDMI Coiled cable 4Kp30 Full to Full (30cm/50cm)
- HDMI Coiled cable 4Kp30 Full to Micro (30cm/50cm)
Sunhood:
- Ninja V 5” Sunhood (compatible with Shinobi/Shinobi SDI)
Cage:
- Shinobi 5” Cage
Shinobi SDI - Quick Start Guide 3
Getting started
Connect and power-up
Power
You can power the device using the supplied AC power
supply, but if you plan to use a battery we recommend you
fully charge before use.
Choosing the right battery for your application
Standby mode Monitor mode
Battery time
(Based on 7.4V)
We recommend using Atomos NP-F series batteries.
4 Shinobi SDI - Quick Start Guide
2600mAh - 3hrs 2600mAh - 1.5hrs
5200mAh - 6hrs 5200mAh - 3hrs
7800mAh - 12hrs 7800mAh - 6hrs
Battery / Battery Eliminator
Shinobi SDI has a single battery slot. To connect a compatible
battery, place the battery in front of the retaining lug, align with
the connectors and slide the battery into the lock position.
To connect the supplied Battery Eliminator, follow the same
procedure and lock battery into position.
Touching the Battery icon in the top right of your screen will
allow you to accurately see remaining battery life. Refer to
the User Manual for more information.
12V-15W AC Battery Eliminator
P/N: ATOMACP005
Loading...