Atomic AMZ Instruction And Assembly Manual

Instruction and Assembly Manual

Version 1.5 (October 2016)

Tools Needed (Not Included) :

Equipment required :

Tools Included :

Thank you for purchasing this Atomic product. BZ is a high
performance competition machine for 1:28 scale. Please read this
manual in detail in order to have proper assembly of this product
and wish you have fun with it.

Car Body Radio System Ball Diff Oil Grease

Rim Tire Battey

Small Screw Driver 1.5mm Allen wrench

1.3mm Allen wrench Diff tool

Hex Nut Driver

4.5mm
Hobby Knife

1. 5mm Drill Bit 2.0mm Drill Bit

#1500 Sandpaper

1.9x4KB(Silver)

2x4KM

x8

x3

Bulkhead B (+0)

Bulkhead A (+0)

1

1

2

Apply Thrust
Bearing Grease

oil

Polish the diff plate and thrust
bearing plate with #1500 sand
paper

2.38mm
Thrust Ball

Diff Housing (Short)

Diff Housing (Long)

27T Pulley

Diff rubber

Diff Scwer

Pulley Collar

Diff Nut

Build 2 sets

2

Loosen

Tighten

After assembly

Diff tool

Ball differential

Attaching bulkheads

P.1

Apply Grease

Apply Ball Diff
Grease

M1.9x4KB (silver color)

M1.9x4KB (silver color)

2x4KM

2x4KM

Bulkhead B (+0)

Bulkhead A (+0)

Bulkhead B (+0)

Bulkhead A (+0)

Motor Mount

Spur gear shaft

Lower deck