Atmor - A leading international
manufacturer of tankless electric
instant water heaters dedicated
to excellence!
•
Trusted Global Brand - Established over 40 years
ago, Atmor specializes in manufacturing superior
tankless electric instant water heaters. We manufacture
state-of-the-art on-demand water heaters for appliance
companies and suppliers in over 40 countries.
•
Proven performance - Atmor’s tankless electric instant
water heaters are an energy-efficient and the most
economical way to provide hot water instantaneously
to a sink, a shower, or to an entire property –
residential or commercial.
•
Quality Assurance – The Atmor manufacturing
process is carried out entirely under one roof,
with constant oversight and quality control to ensure
that every unit is up to the mark. Atmor is dedicated
to improving the quality of its water heaters and
providing excellent service, exceeding both industry
standards and our customers’ expectations.
Our innovations ensure maximum energy efficiency
and total customer satisfaction.
Super 900 Series
With Atmor solutions,
your hot water will never run out,
and your shower will never run cold…
Your best choice for Tankless Electric
Instant Water Heaters
•
Approved Testing – With Atmor water heaters
distributed in over 40 countries, we comply with all
relevant international standards, including UL,
BEAB, TUV, IP 44 (anti-splash protection), CB, CE,
and ISO 9002.
•
Eco-Friendly – Saving you Time, Money, Water,
and Space. Not to mention, our products also last
longer than the water storage tanks and most
elements are recyclable.
Did you know in most US homes, the heating of water is usually
the second largest energy expense, after space heating and
cooling. Typically, storage tank water heating can account for up
to 30%-50% of the average home energy bill. Inconvenient
situations such as waiting for the hot water to reach the faucet,
finding yourself with no more hot water while having to wait for
the tank heat up again, or constantly heating a storage tank of
water even when it is not in use all add up to this expense.
What if there was an all-around solution that saves you money,
time, energy, and resources?
The Atmor Tankless Electric Instant Water Heaters are the
eco-friendly, efficient and convenient solution you have been
looking for – delivering to you an endless supply of hot water
instantaneously at the point of use only when you need it.
Now you can rest your mind at ease and enjoy the continuous
flow of hot water on demand.
Features & Benefits:
• Hot Water on Demand – Without the wait, delay and
excessive water wastage.
•
Drastically reduce energy consumption - unit activated
by water flow.
•
Eliminate energy wastage – no more heating storage
tank water; even when on standby.
•
A continuous and endless flow of hot water. No more
worry of hot water ever running out.
•
Prevents Legionella bacteria growth - No stagnant water
•
Standard NPT fittings – does not require soldering.
•
Unit mounts directly to the wall using common
handy tools.
•
Green & Eco-Friendly
•
Save on Space – Only 10% of the size compared to
standard tank heaters.
Applications:
•
Residential
•
Office Buildings
•
Commercial Buildings
•
Tenant occupied living/working spaces
•
Public Bathrooms
•
Malls and other retail shopping centers
•
Restaurants/Food Service Stations/
Concession Stands
•
Rest Stops
•
Food Carts
•
RV’s, Buses, and Trailers
•
Schools
•
Airports, Train/Bus Stations
•
Fitness Centers
•
And more…Simply any sink or shower
that needs hot water!
•
Compact design blends well into home environment or
can be easily concealed out of sight.
•
Longer lifespan than standard tank heaters.
•
Certification: UL, ISO 9001:2008
SAVE
WATER
TIME
MONEY
ENERGY
Installation
• Sizing - To size your unit accurately based on performance,
there are two key factors you must first understand:
– The application (faucet, shower, etc.)
– The inlet water temperature.
• Electrical - All Atmor tankless electric instant water heaters
are specifically designed to be hardwired to a dedicated
circuit breaker. These units do not come with a cord and
• Plumbing – A pre-heated or cold water feed should be
connected into the inlet water connection.
• Regulations - Please be sure that the installation is done in
compliance with all applicable plumbing and electrical codes.
• Mounting – Atmor products are to be mounted directly to the
wall with the water connections on the bottom.
plug and are not designed to be plug-in units.
Technical Information & Specifications
Model Number AT900-03 AT900-04 AT900-06 AT900-08 AT900-10 AT900-13
Watts 3000 3800 6500 8500 10500 13000
Kilowatts 3 3.8 6.5 8.5 10.5 13
Volts 110 240 240 240 240 240
Required Current Breaker
Size (Amps)
Total Connected Load (Amps) 27 A 16 A 27 A 36 A 44 A 55 A
Required Wire Size 10 AWG 12 AWG 10 AWG 6 AWG 6 AWG 4 AWG
Product Weight (Lbs) 3.5 3.5 3.5 3.5 3.5 3.8
Product Dims (L x W x H) 7.29" x 11.82" x 3.55"
Phase Single
Min. Activation Rate
(Gallons Per Min = GPM)
Min. operating
temperature (F)
Min. Output Temp (F) 65
Max. Output Temp (F) 130
Nominal Water Volume 0.11 Gallons / 0.42 Liters
Working Pressure 8 BAR (115 psi)
Maximum Tested Pressure 16 BAR (230 psi)
Temp Overheat Protection Yes
Wall Mountable Yes
Water Connection Location Bottom of Unit
Water Connection Size (in.) 1/2" NPT
Warranty 2 years (parts only) Limited Warranty, 7 years free from Leakage.
Installation Designed to be hardwired to a dedicated circuit breaker.
30 A 20 A 30 A 40 A 50 A 60 A
0.5 GPM
36
Energy Efficiency Guide
Model Number AT900-03 AT900-04 AT900-06 AT900-08 AT900-10 AT900-13
110 V 3.0 kW N/A N/A N/A N/A N/A
208 V N/A 2.8 kW 4.9 kW 6.4 kW 7.9 kW 9.8 kW
240 V N/A 3.8 kW 6.5 kW 8.5 kW 10.5 kW 13 kW
The Best Choice for Tankless Electric Instant Water Heaters
Super 900 Series
Inline Tankless Electric
Instant Water Heaters
3 Steps to Choosing
your Atmor Unit
STEP 1:
Define your point of use application(s)
in the sizing chart (right).
For example: Single Sink, Double Sink,
Single Shower, Sink and Shower.
STEP 2:
Locate your geographical region on
the above map of the United States
to identify the inlet cold water
temperature for your region.
The correlating color coding for your
region will be necessary for Step 3.
STEP 3:
Finally, reference the sizing guide
chart to locate your point of use
application, then cross-reference to
find the color code associated with
your region’s inlet cold water
temperature. Within that column,
you will see which unit best fits
your application.
Sizing Guide
POINT OF USE
Single Sink
Double Sink
Shower
Shower & Sink
North, Inlet water 37°F - 50°F
North, Inlet water 37°F - 50°F
Center, Inlet water 51°F - 60°F
South, Inlet water 61°F - 75°F
GALLONS
MINUTE
(GPM)*
0.5
0.5
1
1
1.5
1.5
2
2
PER
AT900-03
3kW/110V
AT900-04
3.8kW/240V
37ºF - 50ºF
AT900-06
6.5kW/240V
AT900-08
8.5kW/240V
51ºF - 60ºF
AT900-10
10.5 kW/240V
61ºF - 75ºF
AT900-13
13kW/240V
Temperature Rise
* These values refer only to the hot water maximum flow rate at the device outlet.
Reference Guide
Controlling the flow rate (Gallons per Minute) into your unit is essential to ensure a proper consistent temperature rise in order to
meet your desired hot water temperature. When experiencing a high flow rate, it is recommended to use a flow restrictor or aerator
at your application to achieve optimal temperature rise. See below for further information.
MODEL NUMBER
35° F Temp Rise 0.6 GPM 0.74 GPM 1.3 GPM 1.63 GPM 2.15 GPM 2.8 GPM
45° F Temp Rise 0.5 GPM 0.56 GPM 1.05 GPM 1.23 GPM 1.65 GPM 2.25 GPM
77° F Temp Rise 0 GPM 0 GPM 0.67 GPM 0.7 GPM 0.82 GPM 0.9 GPM
* GPM= Gallons Per Minute
For additional product specifying needs, contact Atmor Support:
Call 1-888-783-6082 or email info@paragongroupusa.com
AT900-03 AT900-04 AT900-06 AT900-08 AT900-10 AT900-13
3kW/110V 3.8kW/240V 6.5kW/240V 8.5kW/240V 10.5kW/240V 13kW/240V
www.atmor.net www.atmor.net
Loading...