Atmel ATSTK94 User Manual

R

FIELD PROGRAMMABLE
SYSTEM-LEVEL INTEGRATION

EVERY ENGINEER’S DESKTOP

ON

ATSTK94 STARTER KIT

Atmel offers a low-cost development kit for the designer who wishes to begin
working with the award-winning FPSLIC™ (AT94K) family of devices. The kit
allows designers to design, synthesize, simulate and program Atmel’s new
FPSLIC product. A comprehensive tutorial takes designers through the
complete FPSLIC development process. The starter kit, which runs on PC
Windows®-based platforms, includes everything needed to get started with
FPSLIC, including all software, tutorials, complete documentation, boards,
parts and cables. The kit consists of a starter kit board that includes:

• AT94K40AL Device

• AT17LV010 Device

• AT17 Series ISP Port for Direct ISP

Download from PC

• Push-button Switches and LEDs

• Four Alphanumeric LED Displays

• Two RS232 Transmit/Receive Ports

• 18.432 MHz, 4 MHz and 32 kHz

Clock Sources

• Power Management Circuitry (Direct

Plug-in-wall 9-volt Power Supply to
Board – Supplied to US Customers)

• Easy Access to All FPSLIC Pins via

Headers

• Push-button FPSLIC Reset

• ATDH2225 Configurator Programming

Cable for Rapid AT17LV010 In-System
Programming

• The System Designer™ Software

(4-month License)

FPSLIC

THE ATSTK94 STARTER KIT

R

Corporate Headquarters

2325 Orchard Parkway
San Jose, CA 95131
Tel: [phone]
Fax: [phone]

Europe

Atmel SarL
Route des Arsenaux 41
Casa Postale 80
CH-1705 Fribourg
Switzerland
Tel: [phone]
Fax: [phone]

Asia

Atmel Asia, Ltd
Room 1219
Chinachem Golden Plaza
77 Mody Road
Tsimshatsui East, Kowloon
Hong Kong
Tel: [phone]
Fax: [phone]

Included in the System Designer Software:

• Full-featured Version of the FPSLIC

Development Tool

• Co-verification for Complete

Hardware (VHDL/Verilog) or Software
(C/ASM) Interactive Simulation

• Comprehensive FPGA Tool Suite

• Configurator Programming System

(CPS)

• One-month AVR C Compilers

Evaluation License

• ModelTech MTI HDL Simulator

• Tutorials, Hands-on Examples and

• Exemplar HDL Synthesis

®

• AVR

• AVR Studio

Ordering Information for the ATSTK94 Starter Kit

The low-cost starter kit is available from Atmel-franchised distributors or by
contacting your local Atmel Sales Office; the ordering code is ATSTK94.

Instruction Set Simulator (ISS)

®

Complete Development

and Debug Environment

Documentation on How to Use
FPSLIC, System Designer and the
Starter Kit Board

Japan

Atmel Japan K.K.
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: [phone]
Fax: [phone]

e-mail

[e-mail]

Web Site

http://www.atmel.com

©Atmel Corporation 2001

Atmel Corporation makes no warranty
for the use of its products, other than
those expressly contained in the
Company’s standard warranty which is
detailed in Atmel’s Terms and
Conditions located on the Company’s
web site. The Company assumes no
responsibility for any errors which may
appear in this document, reserves the
right to change devices or
specifications detailed herein at any
time without notice, and does not
make any commitment to update the
information contained herein. No
licenses to patents or other intellectual
property of Atmel are granted by the
Company in connection with the sale
of Atmel products, expressly or by
implication. Atmel’s products are not
authorized for use as critical
components in life support devices
or systems.

Atmel®, AVR® and AVR Studio® are the
registered trademarks of Atmel;
FPSLICTM and System DesignerTM are
the trademarks of Atmel. Other terms
and product names may be trademarks
of others.

1952B–10/01/15M