The Atlona AT-VGA-RS300SRS (Sender and Receiver) extender unites with
stereo audio allows users to extend VGA (up to 1920x1200) signals further
than before. Using a single CAT5/5e/6 cable these units extend signal
distances up to 1000ft (300m) with no signal degradation. With built in EQ
and GAIN control the transmission path can be adjusted to adapt to the
cable quality and video bandwidth. This unit is perfect for extending
computer monitors and digital signage applications.
Features
• Supports up to 1920x1200 (WUXGA) to distances up to 1000ft (300ft).
• Supports RS-232 control
• Supports analog stereo audio
• Adjustable equalization and gain control on AT-VGA-RS300R (receiver)
• Wall mounting case & interlocked power jack
Package Contents
• 1 x AT-VGA-RS300SRS (Sender and Receiver)
• 2 x 5V DC power supply unit
• 4 x Screws
• 1 x IR Emitter
• 1 x IR Receiver
• 1 x mini screwdriver w/phillips-head and flat-head tips
• 1 x User Manual
Toll free: 1-877-536-3976
Local: 1-408-962-0515
3
atlona.com
Page 4
TechnicalAT-VGA-RS300S
AT-VGA-RS300R
Use
Video Bandwidth
Video Support
Sender
350MHz
VESA
Receiver
Transmission1920x1200 (WUXGA) up to 1000ft (330m) CAT5e
Audio Support
RS-232 Signal Type
Input Video Signal
Equalization
Loop-out
ESD Protection
Human body model
Input Ports
Stereo
Half-duplex
1.2 Volts (peak to peak)
Continuous analog control
1 VGA local out + 1 audio local out on Sender
Human body model
Human body model
1 x VGA
1 x RS-232
±15kV (air-gap discharge)
±8kV (contact discharge)
1 x 3.5mm
1 x RJ45
1 x 3.5mm
Output Ports
1 x RJ45
1 x VGA
1 x 3.5mm
1 x VGA
1 x RS-232
1 x 3.5mm
VGA Connector
RJ45 Connector
RS-232 Connector
3.5mm Connector
Mechanical
Housing
Dimensions
(LxWxH)
Weight
Model
Package
Model
Package
Mounting Type
Power Supply
Power Consumption
Operation Temperature
Storage Temperature
HD15 (15-pin D-sub female)
WE/SS 8P8C with 2 LED indicators
DE9 (9-pin D-sub female)
Jack for analog stereo audio or IR cable
Metal enclosure
(Sender/Receiver) 4.8x3.7x1(inch) or 123x95x25 (mm)
13x7.9x3.7(inch) or 330x200x95(mm)
.75lbs or 370g
2.7lbs or 1240g
.88lbs or 380g
Wall mount case with screws
Interlocked 5V 2A DC
6W
32°F - 104°F or 0°C - 40°C
-4°F - 140°F or -20°C - 60°C
Relative Humidity
Toll free: 1-877-536-3976
Local: 1-408-962-0515
20-90% RH (no condensation)
4
atlona.com
Page 5
PANEL DESCRIPTIONS
AT-VGA-RS300S
Front Panel
1. IR Blaster: connect to IR blaster for IR pass-through from AT-VGA-RS300R to AT-VGA-RS300S
1 2 3 4567
2. RS-232: connect to a RS-232 signal source or receiver
3. Stereo IN: connect to analog audio source
4. S/PDIF IN: connect to digital audio source
5. Push-in button: select between S/PDIF and analog stereo audio [button down-S/PDIF, button
up-Stereo]
6.VGA IN: connect to a VGA input source or a component video source via a VGA-component
break cable
7.IR-Receiver: connect to IR receiver for IR pass-through from AT-VGA-RS300R to AT-VGA-RS300R
Toll free: 1-877-536-3976
Local: 1-408-962-0515
5
atlona.com
Page 6
AT-VGA-RS300S
Rear Panel
8 9101112
8. +5V DC: interlocked power jack to connect to 5V DC power supply unit
9. Local VGA: VGA loop-out to a local VGA display or component video display via a VGA component
breakout cable.
10. System OUT: Plug in a CAT5/5e/6 cable that needs to be linked to AT-VGA-RS300R
11. Local S/PDIF: Digital stereo audio loop-out
12. Local Stereo: Analog stereo audio loop-out
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4
6
atlona.com
Page 7
r
6
AT-VGA-RS300R
Front Panel
1 2 3 4
1. IR Receiver: Connect to the IR receiver
5
2. RS-232: Connect 9pin connector to device then RS-232 capable device
3. Audio Out: Connect analog audio to analog enabled device
4. S/PDIF Out: Connect S/PDIF connector to a digital audio device
5. VGA Out: Connect to VGA display or use a breakout cable to connect to a component video display
6. IR Blaster: Connect to the IR blaster.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
5
7
atlona.com
Page 8
AT-VGA-RS300R
Rear Panel
7 8 910
7. +5V DC Power Jack: connect power supply to device then to outlet
8. System IN: Connect CAT5/5e/6 cable to this port then the AT-VGA-RS300S In Port
9. Equalizer: Adjust the sharpness by moving this rotary control
10. Gain: Adjust the brightness with movements of the rotary control
Toll free: 1-877-536-3976
Local: 1-408-962-0515
6
8
atlona.com
Page 9
O
P
P
F
:
N
n
F
2
Dipswitch
A
*
*
A
*
*
*
A
*
*
*
*
Pin-1
N [ ]
DI
Switch Position
in-2 P
O
F [ ]
in-3 Pi
O
[ ]
-4
OF
Sender & Receiver Extender Mode -
1
[ ]
TxD
of AT-VGA-RS300S is connected to TxD of AT-VGA-RS300R
of AT-VGA-RS300S is connected to RxD of AT-VGA-RS300R
RxD
Description
FF [ ]
O
Note
O
1. TxD: The 3rd pin of RS-232, which is in charge of sending data
2. RxD: The 2nd pin of RS-232, which is in charge of receiving data
3. The Dip Switch is located on the bottom of the AT-VGA-RS300S (sender)
N [ ]
OF
F [ ]
ON
Master to Slave Mode -
[ ]
of AT-VGA-RS300S is connected to RxD of AT-VGA-RS300R
TxD
of AT-VGA-RS300S is connected to TxD of AT-VGA-RS300R
RxD
Installation
1. Connect VGA source, audio source, and RS-232 devices to the AT-VGA-RS300S (Sender)
2. Connect VGA display, audio, and RS-232 devices to the AT-VGA-RS300R (Receiver)
3. Connect a CAT5/5e/6 cable between the transmitting and receiving units.
4. Plug in 5V DC power supply unit to the power jack of the AT-VGA-RS300R (Receiver)
5. Plug in 5V DC power supply unit to the power jack of the AT-VGA-RS300S (Sender)
6. Adjust GAIN control to an appropriate level for a range of input signals (brightness).
7. EQ Control is to equalize the wave form of the receiving video signal (sharpenss).
Wiring
Solid
Stranded
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Performance Guide for VGA Transmissions over CAT5/5e/6 Cable
Performance rating
Shielding
Unshielded (UTP)
Shielded (STP)
Unshielded (UTP)
Shielded (STP)
Termination
C
T5
**
**
*
*
Please use EIA/TIA-568-B termination (T568B) at all times
Type of CAT5/5e/6 Cable
C
*
**
*
7
9
T5e
**
*
C
T6
*
***
*
**
*
*
atlona.com
Page 10
Safety Information
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
Do not modify the wall plug. Doing so will
void the warranty and safety features.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in the case it requires
disconnection.
Precautions
FCC regulations state that any unauthorized changes or modifications to this equipment,
not expressly approved by the manufacturer, could void the user’s authority to operate this
equipment.
Operate this product using only the included external power supply. Use of other power
supplies could impair performance, damage the product, or cause fires.
In the event of an electrostatic discharge this device may automatically turn off. If this occurs,
unplug the device and plug it back in.
Protect and route power cords so they will not be stepped on or pinched by anything placed
on or against them. Be especially careful of plug-ins or cord exit points from this product.
Avoid excessive humidity, sudden temperature changes or temperature extremes.
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements,
fish tanks, and swimming pools.
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or
aerosols. Such products could enter the unit and cause damage, fire, or electric shock. Some
substances may also mar the finish of the product.
Never open, remove unit panels, or make any adjustments not described in this manual.
Attempting to do so could expose you to dangerous electrical shock or other hazards. It may
also cause damage to your AT-VGA-RS300SRS. Opening the product will void the warranty.
Do not attempt to service the unit. Disconnect the product and contact your authorized
Atlona reseller or contact Atlona directly.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
10
atlona.com
Page 11
Warranty
Li mit ed Wa rra nty
Atlona Technologies warrants that (a) its products (AT-VGA-RS300SRS) will perform
substantially in accordance with the accompanying written materials for a period of 3 years
from the date of receipt and (b) that the product will be free from defects in materials and
workmanship under normal use and service for a period of 3 years. In the event applicable law
imposes any implied warranties, the implied warranty period is limited to 3 years from the
date of receipt. Some jurisdictions do not allow such limitations on duration of an implied
warranty, so the above limitation may not apply to customers that fall within those areas.
Customer R emed ies
Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy
shall be, at Atlona Technologies’ decision, either return of the price paid for the product,
repair, or replacement of the product that does not meet this Limited Warranty and which is
returned to Atlona Technologies with a copy of the Customer’s receipt. This Limited Warranty
is void if failure of the product has resulted from accident, abuse, misapplication, or natural
occurrence. In example but not limited to: power surges (electrical storms, local power
outage), dropping the product (or items on the product), contact with fluids, and physical
misconduct (i.e. kicking or punching). Any replacement product will be warranted for the
remainder of the original warranty period.
No othe r war ranti es
To the maximum extent permitted by applicable law, Atlona Technologies and its
suppliers disclaim all other warranties, either expressed or implied, including, but not limited
to, implied warranties of merchantability and fitness for a particular purpose, with regard to
the product and any related written materials. This Limited Warranty gives customer specific
legal rights. Customers may have other rights depending on the jurisdiction.
No lia bilit y for da mages
To the maximum extent permitted by applicable law, in no event shall Atlona
Technologies or its suppliers be liable for any damages arising out of the use of or inability
to use this product, even if Atlona Technologies has been advised of the possibility of such
damages. Such damages include but are not limited to: special, incidental, consequential,
or indirect damages for personal injury, loss of business profits, business interruption, loss
of business information, or any other pecuniary loss. Atlona Technologies’ and its suppliers’
entire liability under any provision of this agreement shall be limited to the amount actually
paid by you for the product. Some Jurisdictions do not allow the exclusion or limitation of
liability for consequential or incidental damage. The above limitations may not apply to you in
such jurisdictional cases.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
11
atlona.com
Page 12
Atlona Product Registration
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an
extra few moments to register your new purchase.
Registration creates an ownership record if your product is lost or stolen and helps ensure
you’ll receive notification of performance issues and firmware updates.
At Atlona, we respect and protect your privacy, assuring you that your registration
information is completely secure. Atlona product registration is completely voluntary and failure
to register will not diminish your limited warranty rights.
To register go to: http://www.atlona.com/registration
Toll free: 1-877-536-3976
Local: 1-408-962-0515
12
atlona.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.