Atlona AT VGA10SS User Manual
User Manual
1 x 10 VGA with Stereo Audio
Distribution Amplifier over CAT5/6 compatible with
AT-VGA300RL AT-VGA10SS
Toll free: 1-877-536-3976
Local: 1-408-962-0515
www.atlona.com
TABLE OF CONTENTS
1. Introduction .................................................. 2
2. Package Contents .................................................. 2
3. Features .................................................. 2
4. Connection and Operation .................................................. 2
5. Specification .................................................. 3
6. PJ45 Pin Configuration .................................................. 3
7. Troubleshooting .................................................. 4
8. LED Indicators .................................................. 5
9. DIP Switch .................................................. 5
10. Safety Information .................................................. 6
11. Warranty .................................................. 7
12. Atlona Product Registration .................................................. 8
Toll free: 1-877-536-3976
Local: 1-408-962-0515
1
www.atlona.com
INTRODUCTION
The Atlona AT-VGA10SS is 1 x 10 VGA with Audio Distribution Amplifier designed to accept a video and audio feed from VGA source such as computer, media player or digital signage player and distribute the same
feed to 10+ locations. The VGA10SS is featured with 1 x VGA/Audio input and 10 x CAT5/6/7 outputs which
could be connected with Atlona AT-VGA300RL receiving modules up to 1000ft away.
The VGA10SS is also featured with local VGA and audio outputs, meant to either connect to a local display
for monitoring or daisy chaining to another VGA10SS amplifier.
Note: Receiving models AT-VGA300RL are a required accessory
PACKAGE CONTENTS
• 1 x AT-VGA10SS (transmitter module)
• 1 x 5v Power supplies (Universal 110/240V)
• 1 x Set of Wall Mounting Ears
• 1 x Instructions manual
FEATURES
• Transmits VGA with Stereo Audio up to 1000ft away to 10+ locations
• Supports Full HD Video with resolutions up to 1920x1200
• Supports high resolution Video VESA: 640x480, 800x600, 1024x768, 1280x800, 1280x768, 1280x1024,
1680x1050, 1600x1200, 1920x1080, 1920x1200
• Compatible with receiving modules:
a. AT-VGA300RL (VGA + Stereo Audio up to 1000ft)
• DDC adjustments (Internal and Extender modes can be used)
• Supports all VESA formats which is perfect when used with specialized projectors or commercial LCD
panels.
• Local VGA/Audio output for local monitoring display or daisy chaining ability to go to another VGA10SS
• Rack Mountable – 1U
CONNECTION AND OPERATION
1. Connect the VGA Source e.g., Computer, Video Codec, switch to the AT-VGA10SS (transmitting unit)
2. Connect the VGA Display e.g., Projector, LCD/LED or a switch to (receiving unit) – (receiving unit is sold
separately)
3. Terminate the CAT5, 6 or 7 wire with 568B termination and use a tester to make sure all pins are wired
correctly before connect it to the VGA10SS transmitter.
4. Connect the power supplies to both transmitter and receiver and the video and in a few seconds the
video should appear on the display.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
2
www.atlona.com
Loading...