Atlona Technologies AT-PC81A is a high performance VGA switcher with remote. Simply pressing a button on
the remote you can select your desired VGA source to be routed to a display. Switcher is tested to guarantee
resolution up to 1920 x 1200 or 1080p without signal degradation. Atlona AT-PC81A is also equipped with
analog audio connections to transfer audio signal from either source to a display or audio receiver.
FEATURES
• LED indicators, tells you which input is currently active
• IR remote control
• Supports high resolution input:
PC: VGA, SVGA, XGA, SXGA, UXGA (1600x1200) and WUXGA (1920x1200), &
HDTV: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p.
• Bandwidth: 350MHz.
• Plug and play, easy to install and operate.
• Built-in advance circuit ensures a smooth transition when switching from one PC/HD source into another.
• RS-232 interface allows control from a distant device.
Video support1080p60, WUXGA [1920x1200@60] & UXGA [1600x1200@60] or higher
TransmissionFull HD 1080p, WUXGA 1920x1200, UXGA 1600x1200 – 65m [210ft]
Audio supportAnalog stereo
Input8x VGA [component/s-video/composite via adapters]*
8x 3.5mm analog stereo audio
1x RS-232
Output1x VGA [component/s-video/composite via adapters]*
1x 3.5mm analog stereo audio
VGA connectorHD-15 [15-pin D-sub female]
RS-232 connectorDE-9 [9-pin D-sub female]
3.5mm connectorEarphone jack for analog stereo audio
Input selectionIR remote control / push button control / RS-232 control
IR remote control
Mechanical
HousingMetal enclosure
Dimensions
[L x W x H]
WeightModel1.1kg (2.4 lbs)
Fixedness1RU rack-mount with ears
Power supply5V 4A DC
Power consumption13 Watts (max.)
Operation temperature0~40°C (32~104°F)
Storage temperature-20~60°C (-4~140°F)
Relative humidity20~90% RH (no condensation)
Model1RU – 440 x 66 x 44mm (1’5” x 2.6” x 1.7”)
Package545 x 230 x 110mm (1’10” x 9” x 4”)
Package2.3kg (5.1 lbs)
Electro-optical characteristics: t = 25° / Carrier frequency: 36-40kHz
Note:
*Component and composite inputs/outputs can be done by using VGA-to-component breakout cables to
connect to the VGA sockets. For S-Video inputs/outputs, please find a VGA-to-Svideo adapter to connect to
the VGA sockets.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
3
www.atlona.com
Page 5
PANEL DESCRIPTION
1. Front Panel
2
134
1. Push button for input switch from channel 1 to channel 8 in sequential order
2. Infrared sensor for receiving commands from the IR remote contorl
5. RS-232 control port for software serial control
6. 3.5mm audio socket for connecting to audio source #1 - #8
7. 3.5mm audio socket for selected audio output
8. VGA input channels for connecting to VGA source #1 - #8
9. Selected VGA output to a VGA display
10. +5V DC power jack: Connect to a +5V power supply unit
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4
www.atlona.com
Page 6
CHANNEL CONTROL
Method A: IR remote control
KeyCodeFunction
Power0x03Turn on/off AT-PC-81A
0x02Switch from the selected input to the next
input channel
0x01Switch from the selected input back to the
prior input channel
10x04Select INPUT 1 to be the input source
20x05Select INPUT 2 to be the input source
30x06Select INPUT 3 to be the input source
40x07Select INPUT 4 to be the input source
50x08Select INPUT 5 to be the input source
60x09Select INPUT 6 to be the input source
70x0aSelect INPUT 7 to be the input source
80x1bSelect INPUT 8 to be the input source
90x1fReserved
0x0cTurn on/off AUTO DETECT which allows the
input source can be automatically changed
once the selected input is disconnected
F10x0dReserved
F20x0eReserved
AUTO DETECT function is used for checking input signal existed or not. Enable this function will make the
output port switching to the next available input in sequential order when the currently selected input signal
is lost. Disable this function will make the AT-PC81A stay at the the currently selected input even if the input
signal is lost.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
5
www.atlona.com
Page 7
Method B: Software Control via RS-232 serial port
2
1. Click here for PC to connect to AT-PC81A.
2. Click one of the eight channel buttons to choose the desired VGA input source
*RS-232 transmission format:
Baud rate: 9600 bps
Data bit: 8 bits
Parity: None
1
ASCII Command Mode
CommandACKFunction
VRV2.01aRead Version
I1Select INPUT 1 to be the input source
I2Select INPUT 2 to be the input source
I3Select INPUT 3 to be the input source
I4Select INPUT 4 to be the input source
I5Select INPUT 5 to be the input source
I6Select INPUT 6 to be the input source
I7Select INPUT 7 to be the input source
I8Select INPUT 8 to be the input source
Toll free: 1-877-536-3976
Local: 1-408-962-0515
6
www.atlona.com
Page 8
Serial String Mode
First byteTransmission data amount (from 1st byte to last byte)
0x53Check code
0x57Check code
0x90Check code
0x08Check code
0xff*Machine number
0x01Command ID
…..Command parameters
Last byteCheck sum (add from first byte to command parameters)
0x09: Command length
0x53 0x57 0x90 0x08: Check code
0xff :Machine number
0x02: Command ID
0x01~0x08: Selected input on AT-PC81A
0x4d~0x54: Check sum
ACK
0xaa: Header
0x09 0x53 0x57 0x90 0x08 0xff 0x07
0x01
0x520xaaSet auto detect function
0x09: Command length
0x53 0x57 0x90 0x08: Check code
0xff :Machine number
0x07: Command ID
0x01/0x00: Enable/disable auto detect
function
0x52: Check sum
ACK
0xaa: Header
Toll free: 1-877-536-3976
Local: 1-408-962-0515
7
www.atlona.com
Page 9
Command CodeResponseFunction
DATA*Check SumACKSET
0x08 0x53 0x57
0x90 0x08 0xff 0x01
0x08 0x53 0x57
0x90 0x08 0xff 0x03
0x08 0x53 0x57
0x90 0x08 0xff 0x04
0x05 0x4d 0x4f 0x440xe50xaa 0x06
0x4a0xaa 0x03
0xN1 0xN4
0x4c0xaa 0x03
0xM 0xM+3
0x4d0xaa 0x03
0xff 0x02
0x53 0x57
0x90 0x04
0x48
Read selected source and auto detect status
0x08: Command length
0x53 0x57 0x90 0x08: Check code
0xff : Machine number
0x01: Command ID
0x4a: Check sum
ACK
0xaa: Header
0x03: Command length
0xN1: N = 1 or 0. (1: Auto detect on / 0: Auto detect off)
Read input status
0x08: Command length
0x53 0x57 0x90 0x08: Check code
0xff :Machine number
0x03: Command ID
0x4c: Check sum
ACK
0xaa: Header
0x03: Command length
0xM: Input signal mapping (bit0: input one / bit1: input two /
bit2: input three / bit3: input four / bit4: input five /
bit5: input six / bit6: input seven / bit7: input eight /
1: signal is on / 0:signal is off)
Pin 1 » Ground (Y)
Pin 2 » Ground (C)
Pin 3 » Y – Intensity (luminance)
Pin 4 » C – Color (chrominance)
Toll free: 1-877-536-3976
Local: 1-408-962-0515
9
www.atlona.com
Page 11
CONNECTION DIAGRAM
Toll free: 1-877-536-3976
Local: 1-408-962-0515
10
www.atlona.com
Page 12
SAFETY INFORMATION
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
Do not modify the wall plug. Doing so will
void the warranty and safety features.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in the case it requires
disconnection.
Precautions
FCC regulations state that any unauthorized changes or modifications to this equipment, not expressly
approved by the manufacturer, could void the user’s authority to operate this equipment.
Operate this product using only the included external power supply. Use of other power supplies could impair
performance, damage the product, or cause fires.
In the event of an electrostatic discharge this device may automatically turn off. If this occurs, unplug the device
and plug it back in.
Protect and route power cords so they will not be stepped on or pinched by anything placed on or against
them. Be especially careful of plug-ins or cord exit points from this product.
Avoid excessive humidity, sudden temperature changes or temperature extremes.
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, fish tanks, and
swimming pools.
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or aerosols.
Such products could enter the unit and cause damage, fire, or electric shock. Some substances may also
mar the finish of the product.
Never open, remove unit panels, or make any adjustments not described in this manual. Attempting to
do so could expose you to dangerous electrical shock or other hazards. It may also cause damage to your
AT-PC81A. Opening the product will void the warranty.
Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or
contact Atlona directly.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
11
www.atlona.com
Page 13
WARRANTY
Limited Warranty
Atlona Technologies warrants that (a) its products (the AT-PC81A) will perform
substantially in accordance with the accompanying written materials for a period of 3 years from
the date of receipt and (b) that the product will be free from defects in materials and workmanship
under normal use and service for a period of 3 years. In the event applicable law imposes any
implied warranties, the implied warranty period is limited to 3 years from the date of receipt. Some
jurisdictions do not allow such limitations on duration of an implied warranty, so the above limitation
may not apply to customers that fall within those areas.
Customer Remedies
Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy shall
be, at Atlona Technologies’ decision, either return of the price paid for the product, repair, or
replacement of the product that does not meet this Limited Warranty and which is returned to Atlona
Technologies with a copy of the Customer’s receipt. This Limited Warranty is void if failure of the
product has resulted from accident, abuse, misapplication, or natural occurrence. In example but not
limited to: power surges (electrical storms, local power outage), dropping the product (or items on
the product), contact with fluids, and physical misconduct (i.e. kicking or punching). Any replacement
product will be warranted for the remainder of the original warranty period.
No other warranties
To the maximum extent permitted by applicable law, Atlona Technologies and its suppliers
disclaim all other warranties, either expressed or implied, including, but not limited to, implied
warranties of merchantability and fitness for a particular purpose, with regard to the product and any
related written materials. This Limited Warranty gives customer specific legal rights. Customers may
have other rights depending on the jurisdiction.
No liability for damages
To the maximum extent permitted by applicable law, in no event shall Atlona Technologies or
its suppliers be liable for any damages arising out of the use of or inability to use this product, even
if Atlona Technologies has been advised of the possibility of such damages. Such damages include
but are not limited to: special, incidental, consequential, or indirect damages for personal injury, loss
of business profits, business interruption, loss of business information, or any other pecuniary loss.
Atlona Technologies’ and its suppliers’ entire liability under any provision of this agreement shall
be limited to the amount actually paid by you for the product. Some Jurisdictions do not allow the
exclusion or limitation of liability for consequential or incidental damage. The above limitations may
not apply to you in such jurisdictional cases.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
12
www.atlona.com
Page 14
ATLONA PRODUCT REGISTRATION
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few
moments to register your new purchase.
Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll
receive notification of performance issues and firmware updates.
At Atlona, we respect and protect your privacy, assuring you that your registration information
is completely secure. Atlona product registration is completely voluntary and failure to register will not
diminish your limited warranty rights.
To register go to: http://www.atlona.com/registration
Toll free: 1-877-536-3976
Local: 1-408-962-0515
13
www.atlona.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.