How it Works
Atlona
Loading...
AT LINE PRO5
User Manual
14 pgs1.74 Mb1
User Manual
16 pgs1.56 Mb0

Atlona AT LINE PRO5 User Manual

Download
Page 1
Atlona 11 Input Scaler and Switcher
w/Dual Mirrored HDMI Outputs
AT-LINE-PRO5-GEN2
atlona.com
User Manual
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 2
Table of Contents
3. Features ............................................................................................ 3
5. Panel Descriptions
9. RS-232 ............................................................................................ 7-11
10. Safety Information ............................................................................................ 12
11. Warranty ............................................................................................ 13
12. Atlona Product Registration ............................................................................................ 14
atlona.com
2
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 3
Introduction
The Atlona 11 Input Scaler and Switcher w/Dual Mirrored HDMI Outputs allows 4 x HDMI or DVI (with use of HDMI to DVI adapter i.e AT14050), 1 x DVI, 3 x VGA, 2 x Component, 2 x Composite video inputs to be scaled to a dual HDMI outputs. With an on-screen display get the ability to change video, scaling, and output resolution options. With additional functions such as RS-232 and IR control the AT-LINE-PRO5 is easier than ever to control or integrate with a preexisting system.
Package Contents
• AT-LINE-PRO5
• 5V/3A DC power supply (110/240V)
• IR Remote Control
• Rack Ears
• User manual
Features
• Scaling any incoming Signal whether HDMI, DVI, VGA, Component or Composite to the native resolution of the display: VGA (640x480) ~ WUXGA (1920x1200) or 480p~1080p
• Audio embedding from any 3.5mm stereo audio input to HDMI outputs
• De-embedding audio from HDMI outputs to 3.5mm stereo audio output to allow video be routed
to a projector and audio to an amplifier (i.e. AT-PA100-G2).
• PAL to NTSC and NTSC to PAL conversion 50/60Hz
• Supports RS-232 control
• IR Commands are available for using a universal remote or an IR control system
• Standard 1U size for easy rack mounting
• Each input is accompanied with a 3.5mm stereo audio input, including HDMI so that it could be
used with DVI sources (use a DVI to HDMI adapter such as AT14050)
• Horizontal and vertical shift, color, tint, brightness, contrast, detail, sizing, and top and bottom vertical blanking adjustments
• Supports input PC timing: VGA (640x480) ~WUXGA (1920x1200 Reduced Blanking Rate),
480p~1080p
• Support input HDMI timing: 480i~1080p60 and VGA (640x480) ~ WUXGA (1920x1200 Reduced Blanking Rate)
• 1080p@60Hz color video up to 12 bits
• Supports audio PCM 2CH
• Supports deep color of 8 / 10 / 12 bits
• Video-over-graphic overlay
• ADC for both video and audio
• HDCP compliant
atlona.com
3
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 4
Specifications
TMDS Clock Frequency 225Mbps
Input Ports 4 x HDMI 7 x 3.5mm stereo audio 2 x VGA 2 x Component Video 2 x Composite Video 1 x DVI Output Ports 2 x HDMI 2 x 3.5mm stereo audio
Resolution outputs Video: up to 1080p @ 60Hz Vesa: up to 1920x1200 Reduced Blanking
Dimensions (WxDxH) 17.16x6.57x1.92 (inch) or 436x67x49 (mm)
Weight 4.6lbs or 2.1kg Temperature Operating: 32°F to 104°F or 0°C to 40°C Storage: -4°F to 140°F or -20°C to 60°C
Power consumption 8.5W
Panel Description
Front Panel
3
4
6
5
7
1. Power button: Press to Turn ON or set the device to standby mode. The LED will illuminate red when the power is ON.
2. IR Receiver: This IR window receives IR signal from the supplied IR remote control.
3. CV 1 & 2: Press CV1 or CV2 to select composite video inputs 1 or 2, the LED will illuminate red.
4. COMP 1 & 2: Press COMP1 or COMP2 to select component inputs 1 or 2, the LED will illuminate red.
5. VGA 1 & 2: Press VGA1 or VGA2 to select input 1 or 2, the LED will illuminate red.
6. DVI 1: Press this button to select DVI input, the LED will illuminate red.
7. HDMI 1 through 4: Press the HDMI number to choose input 1, 2, 3 or 4, the LED will illuminate red
8. MENU: Press this button to bring up the On Screen Display.
9. -/+: Press -/+ buttons to make a selection.
10. ENTER: Press this button to confirm the selection.
8
9 101 2
atlona.com
4
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 5
Back Panel
1
2
5
3
4
6
7
1098
11
1. RS-232: Connect to a 3rd party control system or a computer with this port.
2. 3.5mm Stereo audio out - send stereo audio through to an amp (i.e. AT-PA100-G2)
3. HDMI Out - Mirrored outputs, connect to a display with HDMI or an HDMI to DVI connector (such
as AT14048 which has a compatible locking connector to secure the connection).
4. HDMI In - Connect the HDMI sources here or DVI sources with an HDMI to DVI adapter (i.e. AT-14050)
5. 3.5mm Stereo In - Audio in port used for audio when using an HDMI to DVI adapted source.
6. DVI In & Stereo In: Connect to computer video sources. Use the 3.5mm stereo audio input to
transfer audio through as well.
7. VGA In & Stereo In: These slots are for input sources such as Laptops, Desktop Computers,
Document Cameras or any other VGA source. Each VGA input is accompanied with a 3.5mm stereo audio input.
8. COAX and RCA R/L ports: These ports are to embed analog (RCA R/L) and digital (coaxil) audio
signals from any source.
9. Y/PB/PR : These ports are to connect input sources such as DVD players, Cables Boxes or HD
Cameras.
10. CV & Stereo In: These ports are to connect to input sources such as VCRs or Security Cameras.
11. DC 5V: This port is to connect to the supplied power supply.
Remote Control
1
2
3
4
5
6
atlona.com
1. POWER ON/OFF: Press these buttons to power on the device or to set it
to standby mode.
2. Input Selection: Press to switch between sources.
3. Exit: Press to exit from a sub menu or main menu.
4. On Screen Display operation. Press to increase/decrease the setting value of a selected parameter. OK (Enter): Press to confirm your selection.
7
5. Reset: Press the button to reset the unit’s firmware setting to the factory default.
8
6. Output Resolution: Press to directly select output resolution. For other out
put resolutions that are not available on the remote please enter On Screen Display Menu to select them.
7. MENU: Press to bring up On Screen Display.
8. Auto Adjust: Press to optimize the position of the picture (picture
centering) on the screen.
5
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 6
On Screen Display Menu
1st Tier Option 2nd Tier Option Adjustment
Video PICTURE MODE USER / STANDARD / VIVID / MOVIE
CONTRAST 0 ~ 100 of Contrast Level
BRIGHTNESS 0 ~ 100 of Brightness Level
HUE 0 ~ 100 of Hue Level
SATURATION 0 ~ 100 of Saturation Level
SHARPNESS 0 ~ 100 of Sharpness Level
SCALE OVERSCAN / UNDERSCAN / LETTERBOX/ PANSCAN
/ FULL
NR LOW / MIDDLE / HIGH / OFF
EXIT Back to the 1st Tier
COLOR COLOR TONE USER / NORMAL / WARM / COOL
RED 0 ~ 100 of Red Color Level
GREEN 0 ~ 100 of Green Color Level
BLUE 0 ~ 100 of Blue Color Level
EXIT Back to the 1st Tier
OUTPUT VGA (640x480) 480i 576i WXGA (1280x800)
SVGA (800x600) 480p 576p WSXGA (1680x1050
XGA (1024x768) 720p@60Hz 720p@50Hz WUXGA (1920x1200)
UXGA (1600x1200) 1080i@60Hz 1080i@50Hz WUXGA+ (1440x900)
SXGA+ (1400x1050) 1080p@60Hz 1080p@50Hz 1080p@30Hz
OSD HPOSITION 0 ~ 100 of OSD Horizontal Position
VPOSITION 0 ~ 100 of OSD Vertical Position
TIMER 0 ~ 100 of OSD Show Time (sec.)
BACKGROUND (transparency) 0 ~ 100 of OSD Transparency Level
COLOR BAR On: Color bar will display when the source is
disconnected
Off: After the source is disconnected, a black
screen will be active for 50 seconds before the output signal is shut off
Timeon 15min: Once the source is discontinued, a color bar will be active for 15 minutes before the output signal is shut off
EXIT Back to the 1st Tier
AUDIO SOURCE HDMI / L/R / COAXIAL
DELAY OFF / 40MS / 110MS / 150 MS
SOUND ON / MUTE
EXIT Back to the 1st Tier
INFORMATION SOURCE (Input interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
EXIT - Close the OSD Menu
atlona.com
6
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 7
Connection and Installation
Computer
RS-232
HDTV
Blu-Ray
Projector
Laptop
AT-PA100-G2
Satellite Receiver
or or
or
or
Camera
Laptop
VCR
Computer
Connection
RS-232 is connected through a 9-pin female D connector. The pins will have functions associated with them, some will be unassigned.
Baud Rate: 19200bps Data Bit: 8bits Parity: None Stop Bit: 1bit
atlona.com
5
4
9 8 7
No. Pin Function
1 ---- Not used
2
3
1
2 Tx Transmit 3 Rx Receive 4 ---- Not used 5 Gnd Ground 6 ---- Not used
6
7 ---- Not used 8 ---- Not used 9 ---- Not used
7
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 8
Command
The command codes are case sensitive, do not change capitalization, spacing, or lettering.
Note: Each command and feedback is terminated with a carriage return and linefeed.
Note: If the command fails or is incorrect the feedback should be “Command FAILED”
Set Commands
Command Feedback Description
S POWER 0 >POWER OFF Power off S POWER 1 >POWER ON Power on
S SOURCE 0 >SOURCE CV1 Set the input to CV1 S SOURCE 1 >SOURCE CV2 Set the input to CV2 S SOURCE 2 > SOURCE COMP1 Set the input to COMP1 S SOURCE 3 > SOURCE COMP2 Set the input to COMP2 S SOURCE 4 > SOURCE PC1 Set the input to PC1 S SOURCE 5 > SOURCE PC2 Set the input to PC2 S SOURCE 6 > SOURCE DVI Set the input to DVI S SOURCE 7 > SOURCE HDMI1 Set the input to HDMI1 S SOURCE 8 > SOURCE HDMI2 Set the input to HDMI2 S SOURCE 9 > SOURCE HDMI3 Set the input to HDMI3 S SOURCE 10 > SOURCE HDMI4 Set the input to HDMI4 S OUTPUT 0 > OUTPUT NATIVE Set the output EDID to native S OUTPUT 1 > OUTPUT VGA Set the output EDID to VGA(640X480@60) S OUTPUT 2 > OUTPUT SVGA Set the output EDID to SVGA(800X600@60) S OUTPUT 3 > OUTPUT XGA Set the output EDID to XGA(1024X768@60) S OUTPUT 4 > OUTPUT SXGA Set the output EDID to SXGA(1280X1024@60) S OUTPUT 5 > OUTPUT UXGA Set the output EDID to UXGA(1600X1200@60) S OUTPUT 6 > OUTPUT 480i Set the output EDID to 480i S OUTPUT 7 > OUTPUT 480p Set the output EDID to 480p S OUTPUT 8 > OUTPUT 720p Set the output EDID to 720p@60 S OUTPUT 9 > OUTPUT 1080i Set the output EDID to 1080i@60 S OUTPUT 10 > OUTPUT 1080p Set the output EDID to 1080p@60 S OUTPUT 11 > OUTPUT 576i Set the output EDID to 576i@60 S OUTPUT 12 > OUTPUT 576p Set the output EDID to 576p@60 S OUTPUT 13 > OUTPUT 720p50 Set the output EDID to 720p@50 S OUTPUT 14 > OUTPUT 1080i50 Set the output EDID to 1080i@50 S OUTPUT 15 > OUTPUT 1080p50 Set the output EDID to 1080p@50 S OUTPUT 16 > OUTPUT WXGA Set the output EDID to WXGA (1280x800@60) S OUTPUT 17 > OUTPUT WSXGA Set the output EDID to WSXGA (1680x1050@60) S OUTPUT 18 > OUTPUT WUXGA Set the output EDID to WUXGA (1920X1200@60)
atlona.com
8
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 9
Command Feedback Description
S OUTPUT 19 > OUTPUT 1080p30 Set the output EDID to 1080p@30 S OUTPUT 20 > OUTPUT WXGA+ Set the output EDID to WXGA+(1440X900@60) S OUTPUT 21 > OUTPUT SXGA+ Set the output EDID to SXGA+ (1400X1050@60)
S SIZE 0 > SIZE FULL S SIZE 1 > SIZE OVERSCAN S SIZE 2 > SIZE UNDERSCAN S SIZE 3 > SIZE LETTERBOX S SIZE 4 > SIZE PANSCAN
S PICTUREMODE 0 > PICTUREMODE STANDARD S PICTUREMODE 1 > PICTUREMODE MOVIE S PICTUREMODE 2 > PICTUREMODE VIVID S PICTUREMODE 3 > PICTUREMODE USER
S CONTRAST 0~100 > CONTRAST 0~100
S BRIGHTNESS 0~100 > BRIGHTNESS 0~100 S HUE 0~100 > HUE 0~100 S SATURATION 0~100 > SATURATION 0~100
S SHARPNESS 0~100 > SHARPNESS 0~100 S NR 0 >NR OFF S NR 1 >NR LOW S NR 2 >NR MIDDLE S NR 3 >NR HIGH S PCPHASE 0~63 > PCPHASE 0~63 S PCCLOCK 0~100 > PCCLOCK 0~100 S PCHPOSITION 0~100 > PCHPOSITION 0~100 S PCVPOSITION 0~100 > PCVPOSITION 0~100 S COLORTEMP 0 >COLORTEMP NORMAL S COLORTEMP 1 >COLORTEMP WARM S COLORTEMP 2 >COLORTEMP COOL S COLORTEMP 3 >COLORTEMP USER S RED 0~100 > RED 0~100 S GREEN 0~100 > GREEN 0~100
S BLUE 0~100 > BLUE 0~100
S OSDHPOSITION 0~100 > OSDHPOSITION 0~100 S OSDVPOSITION 0~100 > OSDVPOSITION 0~100
S OSDTIMEOUT 0~100 > OSDTIMEOUT 0~100 S OSDBACKGROUND 0~8 > OSDBACKGROUND 0~8
Scale to Full Screen output
Scale to Overscan Screen output
Scale to Underscan Screen output
Scale to Letterbox Screen output
Scale to Panscan Screen output
Set picture mode to STANDARD
Set picture mode to MOVIE
Set picture mode to VIVID
Set picture mode to USER
Adjust Contrast between 0 and 100
Adjust Brightness between 0 and 100
Adjust Hue between 0 and 100
Adjust Saturation between 0 and 100
Adjust Sharpness between 0 and 100
Set NR Mode to OFF
Set NR Mode to LOW
Set NR Mode to MIDDLE
Set NR Mode to HIGH
Adjust the PC Phase between 0 and 63
Adjust the PC Clock between 0 and 100
Adjust the Horizontal Position between 0 and 100
Adjust the Vertical Position between 0 and 100
Set Color Temperature to NORMAL
Set Color Temperature to WARM
Set Color Temperature to COOL
Set Color Temperature to USER
Adjust the RED hue between 0 and 100
Adjust the GREEN hue between 0 and 100
Adjust the BLUE hue between 0 and 100
Adjust the OSD Horizontal Position between 0 and 100
Adjust the OSD Vertical Position between 0 and 100
Adjust the OSD Timeout between 0 and 100
Adjust the OSD Background between 0 and 8
S AAUD 0 > AAUD 0 Mute audio S AAUD X > AAUD 1 ~ 41 Adjust volume level, replace X with 1 through 41
atlona.com
9
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 10
Command Feedback Description
S AUDIODELAY 0 S AUDIODELAY 1 S AUDIODELAY 2 S AUDIODELAY 3
> AUDIODELAY OFF Turn Audio Delay off
> AUDIODELAY 40ms Set Audio Delay to 40mSec
> AUDIODELAY 110ms Set Audio Delay to110mSec
> AUDIODELAY 150ms Set Audio Delay to 150mSec
Status Commands
Command Feedback Description
R POWER
R SOURCE R OUTPUT
R SIZE
R PICTUREMODE
R CONTRAST
R BRIGHTNESS R HUE R SATURATION
R SHARPNESS R NR R PCHPOSITION R PCVPOSITION R PCCLOCK R PCPHASE R COLORTEMP R RED R GREEN
R BLUE
R OSDHPOSITION R OSDVPOSITION
R OSDTIMEOUT R OSDBACKGROUND R AUDIOMUTE R AUDIODELAY
>POWER OFF~ON Displays POWER status
>SOURCE CV~HDMI4 Displays SOURCE status
>OUTPUT NATIVE~SXGA+ Displays OUTPUT status
>SIZE FULL~PANSCAN Displays SIZE status
> PICTUREMODE STANDARD~USER Displays PICTUREMODE status
> CONTRAST 0~100 Displays CONTRAST value
> BRIGHTNESS 0~100 Displays BRIGHTNESS value
> HUE 0~100 Displays HUE value
> SATURATION 0~100 Displays SATURATION value
> SHARPNESS 0~100 Displays SHARPNESS value
> NR OFF~HIGH Displays NR status
> PCHPOSITION 0~100 Displays PC H-POSITION value
> PCVPOSITION 0~100 Displays PC V-POSITION value
> PCCLOCK 0~100 Displays PC CLOCK value
> PCPHASE 0~63 Displays PC PHASE value
> COLORTEMP NORMAL~USER Displays COLOR TEMP mode
> RED 0~100 Displays COLOR RED value
> GREEN 0~100 Displays COLOR GREEN value
> BLUE 0~100 Displays COLOR BLUE value
> OSDHPOSITION 0~100 Displays OSD H-POSITION value
> OSDVPOSITION 0~100 Displays OSD V-POSITION value
> OSDTIMEOUT 0~100 Displays OSD TIMEOUT value
> OSDBACKGROUND 0~8 Displays OSD BACKGROUND status
> AUDIOMUTE OFF~ON Displays AUDIO MUTE status
> AUDIODELAY OFF~150ms Displays AUDIO DELAY status
atlona.com
10
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 11
Key Commands
Command Feedback Description
K POWER K CV1 K CV2 K COMP1 K COMP2 K COMP2 K PC1 K PC2
>POWER Panel/remote control key POWER
> CV1 Ranel key CV1
> CV2 Ranel key CV2
> COMP1 Panel key COMP
Panel key COMP2
> PC1 Panel key PC1
> PC2 Panel key PC2
K DVI K DVI Panel key DVI K HDMI1 K HDMI2 K HDMI3 K HDMI4
K MENU
K DEC K INC K ENTER
K SOURCE
K VGA K SVGA
K XGA K SXGA K UXGA
K 1080i60 K 480p K 720P60 K 1080P60
K UP
K DOWN
K LEFT
K RIGHT
K EXIT K AUTO
K RESET
> HDMI1 Panel key HDMI1
> HDMI2 Panel key HDMI2
> HDMI3 Panel key HDMI3
> HDMI4 Panel key HDMI4
> MENU Panel key MENU
> DEC Panel key DEC
> INC Panel key INC
> ENTER Panel key ENTER
> SOURCE Remote control key SOURCE
> VGA Remote control key VGA
> SVGA Remote control key SVGA
> XGA Remote control key XGA
> SXGA Remote control key SXGA
> UXGA Remote control key UXGA
> 1080i60 Remote control key 1080i60
> 480p Remote control key 480p
> 720p60 Remote control key 720p
> 1080p60 Remote control key 1080p60
> UP Remote control key UP
> DOWN Remote control key DOWN
> LEFT Remote control key LEFT
> RIGHT Remote control key RIGHT
> EXIT Remote control key EXIT
> AUTO Remote control key AUTO
> RESET Remote control key RESET
atlona.com
11
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 12
Safety Information
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture
If the wall plug does not fit into your local
power socket, hire an electrician to replace your obsolete socket.
Do not modify the wall plug. Doing so will void the warranty and safety features.
This equipment should be installed near the socket outlet and the device should be easily accessible in the case it requires
disconnection.
Precautions
FCC regulations state that any unauthorized changes or modifications to this equipment,
not expressly approved by the manufacturer, could void the user’s authority to operate this
equipment.
Operate this product using only the included external power supply. Use of other power
supplies could impair performance, damage the product, or cause fires.
In the event of an electrostatic discharge this device may automatically turn off. If this occurs,
unplug the device and plug it back in.
Protect and route power cords so they will not be stepped on or pinched by anything placed
on or against them. Be especially careful of plug-ins or cord exit points from this product.
Avoid excessive humidity, sudden temperature changes or temperature extremes.
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, fish tanks, and swimming pools.
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or aerosols. Such products could enter the unit and cause damage, fire, or electric shock. Some
substances may also mar the finish of the product.
Never open, remove unit panels, or make any adjustments not described in this manual. Attempting to do so could expose you to dangerous electrical shock or other hazards. It may
also cause damage to your AT-LINE-PRO5-GEN2. Opening the product will void the warranty.
Do not attempt to service the unit. Disconnect the product and contact your authorized
Atlona reseller or contact Atlona directly.
atlona.com
12
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 13
Warranty
Limited Warranty Atlona Technologies warrants that (a) its products (AT-LINE-PRO5-GEN2) will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the product will be free from defects in materials and
workmanship under normal use and service for a period of 3 years. In the event applicable
law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt. Some jurisdictions do not allow such limitations on duration of an implied warranty, so the above limitation may not apply to customers that fall within those areas.
Customer Remedies Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Technologies’ decision, either return of the price paid for the product, repair, or replacement of the product that does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of the Customer’s receipt. This Limited Warranty is void if failure of the product has resulted from accident, abuse, misapplication, or natural occurrence. In example but not limited to: power surges (electrical storms, local power outage), dropping the product (or items on the product), contact with fluids, and physical
misconduct (i.e. kicking or punching). Any replacement product will be warranted for the
remainder of the original warranty period.
No other warranties To the maximum extent permitted by applicable law, Atlona Technologies and its suppliers disclaim all other warranties, either expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, with regard to the product and any related written materials. This Limited Warranty gives customer specific legal rights. Customers may have other rights depending on the jurisdiction.
No liability for damages To the maximum extent permitted by applicable law, in no event shall Atlona Technologies or its suppliers be liable for any damages arising out of the use of or inability to use this product, even if Atlona Technologies has been advised of the possibility of such
damages. Such damages include but are not limited to: special, incidental, consequential,
or indirect damages for personal injury, loss of business profits, business interruption, loss of business information, or any other pecuniary loss. Atlona Technologies’ and its suppliers’ entire liability under any provision of this agreement shall be limited to the amount actually paid by you for the product. Some Jurisdictions do not allow the exclusion or limitation of
liability for consequential or incidental damage. The above limitations may not apply to you in
such jurisdictional cases.
atlona.com
13
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Page 14
Atlona Product Registration
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an
extra few moments to register your new purchase.
Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates.
At Atlona, we respect and protect your privacy, assuring you that your registration information is completely secure. Atlona product registration is completely voluntary and failure to register will not diminish your limited warranty rights.
To register go to: http://www.atlona.com/registration
atlona.com
14
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use