Atlona AT LINE PRO3 User Manual

Download

AtlonA

Professional 11- input Video Scaler

with Dual HDMI Output

AT-LINE-PRO3

User Manual

TABLE OF CONTENTS

1. Introduction .................................................. 1

2. Features .................................................. 1

3. Package Contents .................................................. 2

4. Specication .................................................. 2

5. Panel Descriptions .................................................. 3

5.1 Front Panel .................................................. 3

5.2 Rear Panel .................................................. 3

6. IR Remote .................................................. 4

7. Operation .................................................. 4

8. OSD Menu .................................................. 5

9. Output Format .................................................. 5

10. RS232 Commands .................................................. 6

11. RS232 Control Protocol .................................................. 6

12. Connection Diagram .................................................. 8

13. Safety Information .................................................. 9

14. Warranty .................................................. 10

15. Atlona Product Registration .................................................. 11

INTRODUCTION

Atlona’s AT-LINE-PR03 is an 11-input switcher with built in High Quality Scaler, designed to switch between all of your AV devices and scale them to the native resolution of your displays. This unit is designed to upscale digital/analog video signal from 2 Composite, 1 S-Video, 2 Component, 1 VGA, 1 DVI-I and 4 HDMI input sources, to 2 mirrored HDMI output of widerange HDTV and PC resolutions, up to 720p or 1080p and WUXGA (1920 x 1200.) Besides video upscaling, this unit also converts digital/analog audio signal to digital format, then output either through HDMI syncing with the video, or Coaxial S/PDIF separately. AT-LINE-PRO3 has a comprehensive OSD menu that allows user to select a variety of output resolutions and ad-

just for best picture quality. Along with the ability of equalization and amplication, this HDCP

Compliant Scaler will also convert between PAL and NTSC.

FEATURES:

• 11-inputs: 2 x Composite AV, 1 x S-Video, 2 x Component, 1 x VGA, 1 x DVI-I and 4 x HDMI.

• 2 x mirrored HDMI outputs (output signal will be identical on both outputs)

• Supports high denition resolutions 720p, 1080i, 1080p

• Both digital and analog inputs are format converted and pixel re-scaled

• 50Hz/60Hz conversion, perfect for customers who have USA TV’s in Europe or other way

around(PAL/NTSC)

• Supports VGA and DVI signals with resolutions up to 1920x1080

• VGA shares audio with Composite Video

• Bypass function on VGA and DVI-I port.

• DVI-I support both analog and digital input

• Additional audio output: Analog L/R and Digital Optical.

• 10-bit triple-ADC converter for RGB/YPBPR.

• Dual high quality scaling engines

• Control with IR remote, RS232 and manual input.

• Dual 3-D motion adaptive video de-interlaces.

• 3-D video noise reduction.

• HDCP Compliant

• Operates through on-screen OSD menu control and remote control.

PACKAGE CONTENTS:

1. Atlona AT-LINE-PRO3 Scaler Box.

2. Remote Controller

3. 5V DC Power Supply Adaptor ( universal 110/220v)

4. Operation Manual

5. Rack ears (pair) x 1

SPECIFICATIONS

• Digital Video Amplier Bandwidth: 1.65 Gbps

• Input DDC Signal: 5 volts

• Input Video Signal: 1.2 volts p-p

• Output/Input Resolutions: up to 1080p

• Inputs: 2 x Composite AV, 1 x S-Video, 2 x Component, 1 x VGA, 1 x DVI-I and 4 x HDMI (all

with audio)

• Outputs: 2 x HDMI ( Video/Audio) or route Audio though Digital Optical or Analog Audio outputs

• RS232 Control Port

• Power Supply: 5V DC ( universal 110/220v )

• Dimensions: 17.3”W x 1.7 “H x 7.9 “D

• Shipping Weight: 6lbs

• Operating Humidity Range: 5 to 90% RH (no condensation)

• Operating Temperature Range: -5 to +35oC (-41 to +95oF)

PANEL DESCRIPTIONS

Front Panel

1 2 4 5 6

1. Input selection: Knob Left/Right to select desired input selection.

2. Standby: Press Button for power standby..

3. Button of output format rolling between 720P, 1080P and bypass. Bypass function is useful under VGA and DVI-I input.

4. Indicator of 720P.

5. Indicator of power standby. When power is on standby, the LED lights.

6. Indicator of 1080P.

7. Indicator of input sources.

Rear Panel

1. Input: AV1 and AV2 with Stereo Audio.

2. Input: VGA

3. Input: S-Video

4. Input: Component1 (YPbPr) # 1 and Component1 (YPbPr) # 1 with Stereo Audio.

5. Input: DVI-I with audio R/L and optical.

6. Input: HDMI1 - 4 (supports audio 5.1)

7. Output HDMI1 and 2 with Stereo Audio and Optical.

8. Input: 5V DC Power supply – (universal 110/240v)

9. RS232

IR REMOTE

0x14

0x19 0x1B 0x11 0x15

0x46

1. STANDBY: Press the button once to enter standby mode; press again to power the unit on

2. INFO: Press the button to view the input

and output message.

3. INPUT SOURCE: Press any of the button

to directly select desired Input source.

OPERATION

0x12 0x59

0x50

0x55 0x48

0x5E 0x06

0x07

0x440x18 0x0F 0x51

0x080x17

0x02

0x1A0x1E

4. UP/DOWN: Select between the input

sources one by one.

5. UP/DOWN/LEFT/RIGHT: Press

UP/DOWN button to move the highlighter bar to the desired parameter in OSD menu. Press LEFT/RIGHT to increase/decrease the setting value of a selected parameter.

6. MENU: Press the button to activate an

on screen menu page.

7. PC BYPASS: Press the button to enter

bypass mode.

8. 720P: Press the button to directly output

720P.

9. 1080P: Press the button to directly output

1080P.

SYSTEM CODE : 00FF

1) Connect the inputs of the AT-LINE-PRO3 into desired sources (such as AppleTV, Blu-Ray Player, PS3, Set Top Box etc)

2) Connect the AT-LINE-PRO3 Outputs to desired HD Displays (such as LCD, DLP or any other standard).

3) Power on the desired input source you want to show.

4) Connect the 5V DC power supply into the unit and turn on the display you want to watch.

5) Use IR remote or manually roll the Knob on the front panel to choose desired input source.

NOTE: VGA and AV2 share the same Stereo audio input, S-video and YPBPR2 share the same Stereo audio.

Atlona’s AT-LINE-PRO3 accepts AV, SV, VGA, YPBPR, DVI-I and HDMI inputs.

OSD MENU

PICTURE

OSD

CONTRAST 0~100 of contrast level BRIGHTNESS 0~100 of bright level SATURATION 0~100 of saturation level SHARPNESS 0~100 of sharpness level HUE 0~100 of sharpness level PICTURE MODE STANDARD/ DYNAMIC/ SOFT /PERSONAL SCALE FULL/ OVERSCAN/ UNDERSCAN/ LETTERBOX/ PANSCAN NR HIGH/ MID /LOW/ AUTO/ OFF RESET Reset the above parameters to the default factory settings CONTRAST 0~100 contrast level BRIGHTNESS 0~100 of bright level H-POSITION 0~100 of H position level V-POSITION 0~100 of V position level H-SIZE 0~20 of H size level V-SIZE 0~20 of V size level RESET Reset the above parameters to the default factory settings H-POSITION 0~100 of H position level V-POSITION 0~100 of V position level DURATION 5s/ 15s/ 30s/ 60s HALFTONE 0~8 of halftone level RESET Reset the above parameters to the default factory settings

OUTPUT FORMAT

AV/SV PAL, NTSC

YPBPR/HDMI 480i,480P,576i,576P,720P@[50/60], 1080i@[50/60],1080P@[50/60]

VGA/DVI 800x600@60, 1024x768@60,1152x864@60, 1280 x768@60,

VESA-BYPASS 800x600@60,1024x768@60,1280 x720@60, 1280x1024@60,

AV/SV/YPBPR/HDMI/VGA/DVI 720P@[50/60], 1080P@[50/60]

VESA-BYPASS 800x600@60,1024x768@60,1280 x720@60, 1280x1024@60,

INPUT

1280 x960@60,1280x1024@60, 1440 x900@60,1400 x1050@60,

1600 x1200@60,1920 x1200@60

1280 x960@60,1440 x900@60,1600 x1200@60,1920 x1080@60

OUTPUT

1280 x960@60,1440 x900@60,1600 x1200@60,1920 x1080@60

RS232 COMMANDS

TXD transmit serial data to PC

RXD receive serial data from PC

The RS232 connecter on our product is female type. User can use the USB to RS232 cable. or use the direct serial cable. The female side connect to PC RS232 port, the male port connect to the RS232 port on our product

female type (nine holes)

male type (nine pins)

RS232 CONTROL PROTOCOL

The connection between AT-LINE-PRO3 and remote controller with RS-232 modem cable

AT-LINE-PRO3 Remote Controller

PIN Denition PIN Denition

1 NC 1 NC 2 Tx 2 Rx 3 Rx 3 Tx 4 NC 4 NC 5 GND 5 GND 6 NC 6 NC 7 NC 7 NC 8 NC 8 NC 9 NC 9 NC

RS-232 transmission format:

Baud Rate : 9600 bps Data Bit : 8 bits Parity : None Stop Bit : 1 bit

Command:

COMMAND ACTION

ASCII: “|s1” select source CVBS1 HEX: 0x7C 0x73 0x31 ASCII: “|s2” select source CVBS2 HEX: 0x7C 0x73 0x32 ASCII: “|s3” select source VGA HEX: 0x7C 0x73 0x33 ASCII: “|s4” select source SVIDEO HEX: 0x7C 0x73 0x34 ASCII: “|s5” select source YPBPR1 HEX: 0x7C 0x73 0x35 ASCII: “|s6” select source YPBPR2 HEX: 0x7C 0x73 0x36 ASCII: “|s7” select source DVI HEX: 0x7C 0x73 0x37 ASCII: “|s8” select source HDMI1 HEX: 0x7C 0x73 0x38 ASCII: “|s9” select source HDMI2 HEX: 0x7C 0x73 0x39 ASCII: “|sA” select source HDMI3 HEX: 0x7C 0x73 0x41 ASCII: “|sB” select source HDMI4 HEX: 0x7C 0x73 0x42 ASCII: “|o1” select output format 1080P HEX: 0x7C 0x6F 0x31 ASCII: “|o2” select output format 720P HEX: 0x7C 0x6F 0x32 ASCII: “|bp” select bypass mode HEX: 0x7C 0x62 0x70 ASCII: “|hh” show help information HEX: 0x7C 0x68 0x68

Attention:

1. This equipment has power memory function. When restarting this machine, input selection would be xed as it was before.

2. Under bypass mode, the indicators of output will go out.

3. Under bypass mode, when switching from VGA or DVI-I to other inputs, the output will be in 1080P.

4. The output will be 1080P when powered on from bypass mode.

5. The bypass key is only useful under VGA and DVI-I input.

6. Besides the given VESA format, the output will be automatically 1080P.

CONNECTION DIAGRAM

SAFETY INFORMATION

Safeguards

To reduce the risk of electric shock, do not expose this product to rain or moisture.

If the wall plug does not t into your local

power socket, hire an electrician to replace your obsolete socket.

Do not modify the wall plug. Doing so will void the warranty and safety features.

This equipment should be installed near the socket outlet and the device should be easily accessible in case it requires disconnection.

Precautions

FCC Regulations state that any

unauthorized changes or modications to

this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.

Avoid excessive humidity, sudden temperature changes or temperature extremes.

Keep this product away from wet locations

such as bathtubs, sinks, laundries, wet basements and swimming pools.

Use only accessories recommended by

ATLONA to avoid re, shock or other

hazards.

Unplug the product before cleaning. Use a damp cloth for cleaning. Do not use

cleaning uid or aerosols, which could enter the unit and cause damage, re or

electrical shock. Some substances may

also mar the nish of the product.

Never open or remove unit panels or make any adjustments not described in this manual. Attempting to do so could expose you to dangerous electrical shock or other hazards. It may also cause damage to your AT-LINE-PRO3. Opening the product will void the warranty.

Operate this product using only the included external power supply. Use of other power supplies could impair performance, damage the product or cause

res.

In the event of an electrostatic discharge, this device may automatically turn off. If this occurs, unplug the device, and plug it back in.

Protect and route power cords so they will not be stepped on or pinched by anything placed on or against them. Be especially careful of plug-ins, or cord exit points from this product.

Do not attempt to service the unit. Instead disconnect it and contact your Authorized ATLONA reseller or contact ATLONA directly.

WARRANTY

1. LIMITED WARRANTY

Atlona Technologies warrants that (a) its products (the “Product”) will perform substantially in accordance with the

accompanying written materials for a period of 3 YEARS from the date of receipt and (b) that the Product will be

free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event

applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of

receipt. Some jurisdictions do not allow such limitations on duration of an implied warranty, so the above limitation

may not apply to Customer.

2. CUSTOMER REMEDIES

Atlona Technologies and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Technolo-

gies’ option, either return of the price paid for the Product, or repair or replacement of the Product that does not meet

this Limited Warranty and which is returned to Atlona Technologies with a copy of Customer’s receipt. This Limited

Warranty is void if failure of the Product has resulted from accident, abuse, or misapplication. Any replacement Prod-

uct will be warranted for the remainder of the original warranty period or 3 year, whichever is longer.

3. NO OTHER WARRANTIES

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ATLONA TECHNOLOGIES AND ITS SUPPLI-

ERS DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED

TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH

REGARD TO THE PRODUCT AND ANY RELATED WRITTEN MATERIALS. THIS LIMITED WARRANTY GIVES

CUSTOMER SPECIFIC LEGAL RIGHTS. CUSTOMER MAY HAVE OTHER RIGHTS DEPENDING ON THE JU-

RISDICTION.

4. NO LIABILITY FOR DAMAGES

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL ATLONA TECHNOLO-

GIES OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITA-

TION, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS

OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER

PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT, EVEN IF ATLONA

TECHNOLOGIES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, ATLONA

TECHNOLOGIES’ AND ITS SUPPLIERS’ ENTIRE LIABILITY UNDER ANY PROVISION OF THIS AGREEMENT

SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCT. BECAUSE SOME JU-

RISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR

INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

ATLONA

2151 O’toole Ave, Ste D

San Jose CA 95131

Toll Free: 1-877-536-3976

International: 408-954-8782

FAX: 408-954-8792 Website: www.atlona.com E-MAIL: info@atlona.com

ATLONA PRODUCT REGISTRATION

Thank you for purchasing this Atlona product — we hope you’ll enjoy it.

We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership

record if your product is lost or stolen and helps ensure you’ll receive notication of performance issues and rm-

ware updates.

At Atlona, we respect and protect your privacy and assure you that your registration information is completely

secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited

warranty rights.

To register go to www.atlona.com/registration

Atlona AT LINE PRO3 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual