Atlona AT IR CS TX User Manual
Atlona IR Emitter Cable for
POE Extenders
AT-IR-CS-TX
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Placement
The IR emitter can be used in several positions around the controlled device. As long as the IR
receiving window is lined up with the emitted IR signal. (See pictures below for possible placement options)
A red LED will flash to indicate the IR emitter is operational and transmitting.
When using the IR emitter in a rack, it is best to use the included IR cover to
avoid signal interference of the controlled device and possible interference to
other IR devices within the rack.
Signal (S)
Ground ( )
Max peak current: 100mA
Connection Diagram
AT-IR-CS-TX
Emitter
+
-
DC 48V IN
RX
TX
RS-232
S
S
IR IN
IR OUT
AT-UHD-EX-70C-TX
TX
RX
S
P
S
HDMI IN
AT-UHD-EX-70C-TX
FW
CAT5e/6/7 OUT
AT-UHD-EX-70C-RX
POWER
FW
POWER
LINK
AT-IR-CS-RX
Receiver
LINK
RS-232
IR OUT
IR IN
CAT5e/6/7 IN
HDMI OUT
AT-UHD-EX-70C-RX
* Designed for select Atlona products
** For warranty information see http://www.atlona.com/marketing/img/limited_warranty/
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Loading...