Atlona AT HD RG100SR User Manual
HDMITM Extender over 5-Wire
(RGBHV or 5 x RCA) up to 330ft
with Bi-directional IR
AT-HD-RG100SR
atlona.com
User Manual
Toll free: 1-877-536-3976
Local: 1-408-962-0515
TABLE OF CONTENTS
1
1. Introduction 2
2. Package Contents 2
3. Features 2
4. Specification 3
5. Panel Descriptions 4
5.1. Transmitting Module 4
5.1.1. Front Panel 4
5.1.2. Rear Panel 4
5.2. Receiving Module 4
5.2.1. Front Panel 4
5.2.2. Rear Panel 5
6. IR Pass-through 5
6.1. IR Extenders 5
6.2. IR Sockets 5
6.3. Definition of IR Earphone Jack 6
6.4. Supported IR Data Format 6
7. HDMITM Pin Definition 7
8. Coaxial Cable 7
9. Safety Information 8
10. Warranty 9
11. Atlona Product Registration 10
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
INTRODUCTION
2
The AT-HD-RG100SR HDMITM over 5-Wire Extender with Bi-Directional IR allows user to extend HDMITM transmission range up to 330ft (100m) with resolutions as high as 1080p 50/60Hz and also supports 3D. AT-HDRG100SR is extremely easy to install and works perfectly with existing RGBHV or RG-6 coaxial cables, even
original Component + Audio cables will work, which makes it perfect to retrofit those extenders to the current
technology. Built with Bi-Directional IR pass-through extension, users can control the remote HDMITM source
devices such as Blu-ray players, Cable/Sat Boxes, Video Game consoles, etc… instantly at the display site. The
Bi-Directional IR also gives advantage to user to control display via Control System by sending commands (such
as on/off, input change, etc...) from Control System to Display.
The AT-HD-RG100SR comes with one transmitting module and one receiving module. Both transmitter modules are based on the HDMITM 1.3C and HDCP 2.0 and therefore are compatible with:
• All latest video formats such as 1920x1200 or 1080p
• 3D Compatible (all 7 formats)
• EDID pass-though (very important if user would want to connect sources such as computers, 3D players,
latest Satellite receivers).
• Supports all latest Audio formats such as Dolby True HD, DTS-master, etc…
• HDCP compatible
FEATURES
• 3D capable
• HDMITM 1.3c and DVI 1.0 compliant
• HDCP compliant
• Supports 7.1-channel DTS-HD Master Audio and Dolby TrueHD high bitrate audio
• Supports Deep Color and x.v.Color (xvYCC)
• Extends the transmission range up to 330ft (100m) at full 1080p 24-bit color depth; and up to 165ft (50m)
at full 1080p 36-bit color depth
• Supports bi-directional IR pass-through (0~60Khz) and Consumer Electronics Control (CEC) channel
• Supports Video resolutions up to WQXGA (2560x1600@60Hz or 1920x1200@75Hz) or 1080p
• Supports VESA DDC and Hot-Plug Detect (HPD)
PACKAGE CONTENT
• 1x AT-HD-RG100SR
• 1x IR blaster
• 1x IR receiver
• 2x 5V power supply unit
• 1x User`s manual
• 10 x BNC/RCA adapters
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
SPECIFICATIONS
3
Technical Transmitter Receiver
3D Support Yes Yes
HDMITM compliance HDMI 1.3c
HDCP compliance Yes
Video bandwidth Single-link 340MHz [10.2Gbps]
Video Support 480i / 480p / 720p / 1080i / 1080p60 / 1920x1200@75 / 2560x1600@60
Audio Support Surround sound (up to 7.1ch) or stereo digital audio
TM
HDMI
range
HDMITM equalization N/A Auto
Input TMDS signal 1.2 Volts [peak-to-peak]
Input DDC signal 5 Volts [peak-to-peak, TTL]
ESD protection
PCB stack-up 4-layer board [impedance control — differential 100 Ω; single 50 Ω]
Input 1x HDMI
Output 5x BNC
IR remote control
HDMI
BNC connector 75 Ω interlocking socket
3.5mm connector Earphone jack for IR blaster and IR receiver
Mechanical
Housing Metal enclosure
Dimensions
(L x W x H)
Weight Model 560g [1.2 lbs]
Fixedness Interlocking power supply & wall-mount case with screws
Power supply +5V 2A DC
Power consumption 3 Watts [max]
Operation temperature 0~40
Storage temperature -20~60oC [-4~140oF]
Relative humidity
over Coax transmission
Full HD [1080p 24-bit color] @ 330ft (100m)
Deep Color Full HD [1080p 36-bit color] – 165ft (50m)
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
TM
1x IR socket for IR receiver
1x IR socket for IR blaster
Electro-optical characteristics:
TM
connector Type A [19-pin female]
T
= 25 o / Carrier frequency: 20-60kHz
Model [TX/RX] – 93 x 128 x 27mm [3.6” x 5” x 1.1”]
Package 175 x 270 x 80mm [6.9” x 10.6” x 3.1”]
Carton 450 x 370 x 300mm [1’6” x 1’3” x 1’]
Package 1350g [3.0 lbs]
o
C [32~104oF]
20~90% RH [no condensation]
5x BNC
1x IR socket for IR receiver
1x HDMI
TM
1x IR socket for IR blaster
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Loading...