AtlonA
1x9 HDMI™ Splitter with CAT5 Outputs
User’s Manual
MODEL: AT-HD19SS
MODEL: AT-HDRS MODEL: AT-HD15SRS
Rev.0911
T
ABLE OF CONTENTS
1. Introduction ......................................................................... 1
2. Features ........................................................................ 2
3. Package Contents ........................................................................ 2
4. Specifications ........................................................................ 3
5. Panel Description ........................................................................ 4
6. Installation ....................................................................... 5
7. Audio/Video Setting & EDID Learning ...................................................... 6
8. Notice ....................................................................... 7
9. Performance Guide ....................................................................... 7
10. Safety Information ........................................................................ 8
11. Warranty ......................................................................... 9
12. Atlona Product Registration .................................................................... 10
0
INTRODUCTION
Atlona Technologies AT-HD19SS 1x9 HDMI™ splitter is the perfect solution for those who want to
display a single source on 9 or more displays using just single Cat5 or Cat6 cable for each
display. The Atlona splitter has 8 x RJ45 (Cat5/Cat6), one for each display and 1 x HDMI™ output
to be used for local monitoring or a loop-out for cascading multiple splitters. AT-HD19SS is
capable of HDTV resolutions up to: 1080p@130ft and 1080i@200ft.
Note: A receiver unit (balun) is required for each display and sold separately (Model: AT-HDRS or AT-
HD15SRS).
Diagram:
For shorter transmission length, AT-HD15SRS is more recommended instead of AT-HDRS.
1
P
ACKAG
E
CONTENTS
FEATURE
S
HDMI™ 1.3c compliant
HDCP compliant
Allow unlimited cascading
Regenerate the HDMI™ signal
Support audio output
Support default HDMI™ EDID and record the EDID of displays
Extend up to 15m (50ft) of input HDMI™ cable
Extend up to 15m (50ft) of output HDMI™ cable
Extends up to 60m (200ft) (1080i) of output CAT5 cable
Extends up to 40m (130ft) (1080p) of output CAT5 cable
Easy installation
The length depends on the characteristics and quality of the cables. Higher resolutions
and longer transmission distances require low skew cables (<25ns/100m) for best
performance.
1x AT-HD19SS unit
2x Rack-mounting ears
1x 5V DC power supply unit
1x User's manual
2
Loading...